Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
Obsidian...

Obsidian...

Bronze Contributor
Member For 4 Years
Member For 3 Years
Donald Bickers said:
I just set the smoke alarm off,,,,the animals loved that
Click to expand...
My shop's smoke alarms are all connected so when the lounge's goes off so does the office, lab, bottling room, sales etc... 7 smoke detectors at once is horrific

Sent from my VS986 using Tapatalk
 
D

Donald Bickers

Guest
BenJammin said:
I mean when you're as handsome as I am, that's what happens Don
Click to expand...
GNlK6iWt.jpg
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Cruel-Phate said:
@Dr3d my evic is flipping to power on it's own from ni, "was there a fix
Click to expand...

My fix was snugging up my builds. Every time mine jumped out, I would find that the post screws on the Billow had come loose ... even on builds that were already days old. The other problem I had was due to trying to shove oversized builds in the Billow which were only skinny hairs away from touching the chamber wall ... when they did touch ... here's some power mode for ya. Now I snug'm every time I fill the tank when I'm on the Evic, and I decided the Evic is more stable on lower ohm builds anyway. Things got better after I stopped trying to hit the .4 Ti target. But, it is the main reason my Evic now enjoys backup status.

Sounding an alarm and running around the room screaming Danger Will Robinson would be an acceptable response to a mod which noticed a problem with my build. Surprising me by sneaking into power mode without even whispering at me is an unacceptable response to a problem build. That said, the behavior was annoying enough to get me to improve my builds and increase my maintenance.
 
MOMABEAR

MOMABEAR

Gold Contributor
Member For 4 Years
Dr3d said:
My fix was snugging up my builds. Every time mine jumped out, I would find that the post screws on the Billow had come loose ... even on builds that were already days old. The other problem I had was due to trying to shove oversized builds in the Billow which were only skinny hairs away from touching the chamber wall ... when they did touch ... here's some power mode for ya. Now I snug'm every time I fill the tank when I'm on the Evic, and I decided the Evic is more stable on lower ohm builds anyway. Things got better after I stopped trying to hit the .4 Ti target. But, it is the main reason my Evic now enjoys backup status.

Sounding an alarm and running around the room screaming Danger Will Robinson would be an acceptable response to a mod which noticed a problem with my build. Surprising me by sneaking into power mode without even whispering at me is an unacceptable response to a problem build. That said, the behavior was annoying enough to get me to improve my builds and increase my maintenance.
Click to expand...
Showing your age with those analogies lmbo...js


Sent from my Momabear headquarters...
 
Sigmardin

Sigmardin

The Vapographer
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Heather said:
How is @R

Did you include your cereal vape? I have tried almost all of the cereal mixes I can find but never your line. I can't remember them from from your PIF box. Did you include any then?

Hello all.
Click to expand...
I believe I included 2 bottles of Trixie Hobbitses (Trix Yogurt) and 1 or 2 bottles of Faetality (Lucky Charms Custard). This is the first time I've put anything that I make into a PIF box. If you don't get a chance to try it and you would like to just send me a PM.
 
Vaping_Vixen

Vaping_Vixen

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sigmardin said:
I believe I included 2 bottles of Trixie Hobbitses (Trix Yogurt) and 1 or 2 bottles of Faetality (Lucky Charms Custard). This is the first time I've put anything that I make into a PIF box. If you don't get a chance to try it and you would like to just send me a PM.
Click to expand...
Out of curiousury? How close to Trix Yogurt does you mix taste like?? I'm not part of this PIF but the one I tried here in DE was nothing close


Sent from my iPhone using Tapatalk
 
Last edited:
Sigmardin

Sigmardin

The Vapographer
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ViciousVapingVixen said:
Out of curiousury? How close to Trix Yogurt does you mix taste like?? I'm not part of this PIF but the one I tried here in DE was nothing close


Sent from my iPhone using Tapatalk
Click to expand...
The feedback I've received from my toughest critics and the majority of the people who've bought/tried it tell me it's spot on. Taste is of course subjective but I made it specifically to be universal for tanking and/or dripping. I've vaped it on builds as low as .14ohm and as high as 1.8ohm and I enjoy it any which way. The hotter the build, the more the sweet cereal flavor and the Sour like yogurt flavor come out imo. Higher builds give a pretty balanced flavor. It's a complex vape but not overly complex. Different nuances come out in each vape but the stars of the show (trix & yogurt) are always right there leading the way.
I can vape through about 12-15ml in my subtank before needing to rewick and I've been dripping it in my Beyond Vape Mako on a dual parallel staged build 23g/24g @ .16ohm for about 6 days now and the coils still look shiny after 30+ml
 
Vaping_Vixen

Vaping_Vixen

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sigmardin said:
The feedback I've received from my toughest critics and the majority of the people who've bought/tried it tell me it's spot on. Taste is of course subjective but I made it specifically to be universal for tanking and/or dripping. I've vaped it on builds as low as .14ohm and as high as 1.8ohm and I enjoy it any which way. The hotter the build, the more the sweet cereal flavor and the Sour like yogurt flavor come out imo. Higher builds give a pretty balanced flavor. It's a complex vape but not overly complex. Different nuances come out in each vape but the stars of the show (trix & yogurt) are always right there leading the way.
I can vape through about 12-15ml in my subtank before needing to rewick and I've been dripping it in my Beyond Vape Mako on a dual parallel staged build 23g/24g @ .16ohm for about 6 days now and the coils still look shiny after 30+ml
Click to expand...
Is this something you are selling? I would love to try some

Sent from my LGLK430 using Tapatalk
 
Pauly Walnuts

Pauly Walnuts

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Obsidian... said:
Did you throw it on a mech to heat and pinch the coils first? I didn't do the math but that should be above a .1 ohm build... I always carry a cheap parallel mech box around to work out the kinks if I'm close to the reg's threshold.

Or just do 1 coil at a time.

Anyway just read this and figured I'd throw in my 2 cents w/o reading the previous posts or knowing anything about your knowledge on the subject... Yeah I'm that guy today.

Hope it helps... If not just say it did anyway

Sent from my VS986 using Tapatalk
Click to expand...
That makes sense. Ill remember that.
 
Pauly Walnuts

Pauly Walnuts

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
So many 'yo mama' memes, so little time...
 
Pauly Walnuts

Pauly Walnuts

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Thank you thank you, Ill be here for ten more minutes
Need to maximize effectiveness
 
You must log in or register to reply here.

VU Sponsors

Top