Become a Patron!

Alternate Universe

InMyImage

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I love my Sigelei mini 30w,,,,,,i got this E-Grip for work this summer,i mow about 2 acres,and this will fit right in my pocket,,,if I find out it doesn't have enough of a battery,ill put a cigarette lighter on the mower for use as a passthrough
Yeah the wife has been using my old EVOD batteries and MVP 2.0 but they are finally starting to die so I wanted to get her something that uses 18650's that are easy to swap. She wanted something small and fairly light weight and I figured that the magnet back panel would be easier for her than the screw on battery cap used on the IPV Mini.
 

vaperature

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Boone County Hospital here in Columbia ain't bad, just sucks that I had to go there for an embarrassing and painful reason.

Time to lay down cause I am under the influence of prescribed narcotics, whew!

My eyes keep rolling back, lol!
Sounds like fun.
 

InMyImage

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I wish I had time to work on my own stuff but I'm under deadline for this thing, my own writing doesn't have any deadline. I'm at a very tedious point in it, pretty much copying and pasting and altering fonts and formatting pages, over and over and over. And looking over everything with such a fine tooth comb my eyes are blurry. Taking a break and eating some bbq ribs right now. Probably won't start again into it until tomorrow.
If everything is the same font, you can wait until the end and select the entire document and change everything at once and then just go back and update the titles and such.

There are programs that will take a bunch of text files and stitch them altogether too.
 

InMyImage

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I still love her!!

Sent from Russ
Yeah, it's kind of weird seeing the transformation though when she doesn't have any makeup or the outfit. She's a tiny thing like our little mistress here.
 

vaperature

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
If everything is the same font, you can wait until the end and select the entire document and change everything at once and then just go back and update the titles and such.

There are programs that will take a bunch of text files and stitch them altogether too.
No, it's much more complicated than that. There are fonts for the authors names, fonts for the poem titles, fonts for the poetry text, fonts for the chapter titles, fonts for the book title page, fonts for the copyright page. It's very tedious. And of course all the poets send in their work in 50 different fonts themselves so everything has to be copied and then pasted as unformatted into the template. There's no other way to do it really.
 

InMyImage

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
No, it's much more complicated than that. There are fonts for the authors names, fonts for the poem titles, fonts for the poetry text, fonts for the chapter titles, fonts for the book title page, fonts for the copyright page. It's very tedious. And of course all the poets send in their work in 50 different fonts themselves so everything has to be copied and then pasted as unformatted into the template. There's no other way to do it really.
Yep, been there but on a much smaller scale and it is a pain.
 

vaperature

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Yep, been there but on a much smaller scale and it is a pain.
It's very rewarding once it's done but yep this stage of it is a real pain in the ass. Plus the artist supplying the cover art has never even heard of a 300dpi jpeg. I'll probably have to personally go pick her art up and scan it myself.
 

kelli

Vapid Vapetress
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Yeah, it's kind of weird seeing the transformation though when she doesn't have any makeup or the outfit. She's a tiny thing like our little mistress here.
i am not a mistress!
 

vaperature

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
On a vaping note got got my package from Vapers Edge today, 15ml of Ruthless EZ Duz It on ice, only paid $9.60 for it with free shipping. This stuff is usually only found in B&Ms and usually runs at least $12 plus tax. Vapers Edge is a little weird, they only take paypal, and that goes to some guy named David Rodriguez, so I was a little worried at first, but package arrived in timely fashion after getting tracking info so I'm happy. Also got two bottles coming from ITC from a coupon code, got both 15ml bottles free just paid shipping. I really make out with the vape deals, I gotta tell you. :)
 

vaperature

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Ah crap just got a shitload more preorders for the book and have to sift through all the paypal alerts, and I thought my workday was done. I'll stop back later Vaperoonies.
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I couldn't resist and just saying...

This Alternative Universe is addicting...

I already killed 90ml's of juice in just 12 days, oh my!
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
hugs. don't drool on me tho.
I got me a drool bucket, no worries. lol
My lord that is the slowest most painful loading page i've seen in a long time. didn't bother letting it finish.
It's an article on Anti-Gunners setting up a fake gun shop to simply shame first time buyers but it all looks completely like a hoax to me.

I won't get into any type of Firearm debate within this here thread, just being respectful.
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I am very grateful that the doc wrote me a prescription for narcotics cause that lidocaine is wearing off and I am insanely sensitive to pain these days, I almost fainted and had a seizure due to the procedure but didn't breakout in hives due to part of them giving me a shot. I am not accustom to being treated so kindly with respect and it was my very first time there. I am usually treated like someone from skidrow with hospitals. Boone County Hospital is so far the only hospital to treat me with dignity, respect, and listening. I still can't believe they allowed me to vape inside the ER room I was in and congratulated me on my vaping habit, they also stated that they actually hint to patients to switch to vaping vs going cold turkey and or the other stuff which really surprised me. I also found out that a nurse has been vaping for 3 years and will vape at work, I was so confused...majority of the time vaping is frowned upon by some medical staff but I never was told to walk outside across the street and etc.

I am loopy but damn, I kinda like this hospital and that coming from me is insanely rare. One nurse didn't like the smell of the Real Cig juice by Vapers Tek but told me that is far more safer than analogs nonetheless.

I am rambling on, lol....


//rant off
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Does anyone have any easy to understand directions for DIY juice...I am horrible with math, measurements, chemistry, and the like. I am legally blind in my left eye and horrible vision in my right eye with no depth perception and insanely unstable hands. I really want to get into DIY juice to mix up tobacco juices badly, just limited cause of medical conditions.

Don't get me wrong, I really enjoy Vapers Tek juices, just insanely curious to get into mixing up my own.
 

HazyShades

Platinum Contributor
Member For 4 Years
Does anyone have any easy to understand directions for DIY juice...I am horrible with math, measurements, chemistry, and the like. I am legally blind in my left eye and horrible vision in my right eye with no depth perception and insanely unstable hands. I really want to get into DIY juice to mix up tobacco juices badly, just limited cause of medical conditions.

Don't get me wrong, I really enjoy Vapers Tek juices, just insanely curious to get into mixing up my own.
http://ecigvape.com/simple_calc.php <-------------< use
http://www.ecigexpress.com/ <----------------< buy
http://wizardlabs.us/ <--------------< buy

lab equipment like graduate cylinder and small flavor quantity at wiz
flavors, nicotine and VG at ecig
VG cheapest on ebay

Have phun
Regards,
Hazy:cool:
 

muth

Gold Contributor
Member For 5 Years
Does anyone have any easy to understand directions for DIY juice...I am horrible with math, measurements, chemistry, and the like. I am legally blind in my left eye and horrible vision in my right eye with no depth perception and insanely unstable hands. I really want to get into DIY juice to mix up tobacco juices badly, just limited cause of medical conditions.

Don't get me wrong, I really enjoy Vapers Tek juices, just insanely curious to get into mixing up my own.
I found Steam Engine's calculations very easy to understand. And I've been very confused by other tables. Can't hurt to try:)
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
http://ecigvape.com/simple_calc.php <-------------< use
http://www.ecigexpress.com/ <----------------< buy
http://wizardlabs.us/ <--------------< buy

lab equipment like graduate cylinder and small flavor quantity at wiz
flavors, nicotine and VG at ecig
VG cheapest on ebay

Have phun
Regards,
Hazy:cool:

Much appreciated...

I found Steam Engine's calculations very easy to understand. And I've been very confused by other tables. Can't hurt to try:)

Much appreciated...

Does anyone do DIY Courses cause I might just need those, lol.
 

muth

Gold Contributor
Member For 5 Years
I'm hung like a field mouse.
field-mouse-mama-and-baby-deborah-smith.jpg

Even so, I still make a big boast of possessing the finesse and skill that it takes to make the ladies legs shake.
My boat aint a yacht but that little thing sure can ride the waves.
I'm an anomaly. :D
All life is precious
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I might just force my bro to mix juices for me since he is College educated and is far more intelligent than I am, lol.
 

muth

Gold Contributor
Member For 5 Years
Much appreciated...



Much appreciated...

Does anyone do DIY Courses cause I might just need those, lol.
I don't know about courses, but the DIY thread is very helpful. And if you have access to ECF, I hear they have good info, too. It's not rocket science but you definitely want to get your nic right.
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I don't know about courses, but the DIY thread is very helpful. And if you have access to ECF, I hear they have good info, too. It's not rocket science but you definitely want to get your nic right.

That is my top concern is the nic strength, maybe I should do a trial run without nic and once I get comfortable move on with the nic. I dislike ECF and it's way to cluttered for me.

Thank you!
 

HazyShades

Platinum Contributor
Member For 4 Years
Much appreciated...



Much appreciated...

Does anyone do DIY Courses cause I might just need those, lol.

yea, what muth said:
http://www.steam-engine.org/juice.asp
but I find the one I posted to easiest. just throw all your flavors together for the flavor mg

ya don't need no stinkin' course.
all you need is VG and nicotine, and your taste buds, bud.
any questions ask us. you have nothing to fear
just don't go putting 100% nicotine in your eye...

stick to less than 24 mg nic for your batches.
easy to but premixed nic in a vg base at 36 and add flavors and vg to bring it down
same for 12 mg juice to bring down to 6...

just man up and do yer thing. we're here for you
 
Last edited:

HazyShades

Platinum Contributor
Member For 4 Years
I don't know about courses, but the DIY thread is very helpful. And if you have access to ECF, I hear they have good info, too. It's not rocket science but you definitely want to get your nic right.

and if you're real good we have a prize for ya...used but never abused
 
D

Donald Bickers

Guest
Okay, Don. You're a discerning sort, turned your nose up at the Subtank Nano as I recall. Would like hear your opinion of the eGrip with RBA head. Deal?
ill let you know when I use it,right now im using the stock coil setup,,,and I like it,,,,the main thing on the nano was it was to hot,even with the 1.2 coil
 

HazyShades

Platinum Contributor
Member For 4 Years
yea, what muth said:
http://www.steam-engine.org/juice.asp
but I find the one I posted to easiest. just throw all your flavors together for the flavor mg

ya don't need to stinkin' course.
all you need is VG and nicotine, and your taste buds, bud.
any questions ask us. you have nothing to fear
just don't go putting 100% nicotine in your eye...

stick to less than 24 mg nic for your batches.
easy to but premixed nic in a vg base at 36 and add flavors and vg to bring it down
same for 12 mg juice to bring down to 6...

just man up and do yer thing. we're here for you

edit: goto ecig express and read around, especially their cookbooks.
 

Tripster

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
yea, what muth said:
http://www.steam-engine.org/juice.asp
but I find the one I posted to easiest. just throw all your flavors together for the flavor mg

ya don't need to stinkin' course.
all you need is VG and nicotine, and your taste buds, bud.
any questions ask us. you have nothing to fear
just don't go putting 100% nicotine in your eye...

stick to less than 24 mg nic for your batches.
easy to but premixed nic in a vg base at 36 and add flavors and vg to bring it down
same for 12 mg juice to bring down to 6...

just man up and do yer thing. we're here for you

It's just mighty difficult to measure when I have no depth perception and I always go over and or go under with measurements with cooking. I just messed up with filling my tank, I thought it was not fully filled but it was and just wasted a lil bit of juice.
 

VU Sponsors

Top