hey guys I have looked at guides read about ohms etc but I just wanted to make sure that this is a safe ohm I will be running at my build is 4 wraps 2.5mm 24gauge
Become a Patron!
Am I at a safe ohm I'm a noob
- Thread starter Nissangtr94
- Start date
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
what mod, batteries, and RDA?
Overdose v2 rda sonar battery awt 3.7v 3000mah 40a
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
normally i'd say buy only LG and samsung batteries, but that battery according to mooch is likely a rewrapped Lg Hg2 anyway. Overdose V2 is a mech mod. SO you battery is a 20 amp battery max. I would say don't go over 18 amps with it.
If you are doing a single coil, your resistance should be about .35 so a fully charged battery will be 12 amps which is fine. If you did a dual coil it would be about 24 amps which isn't safe for your battery. You would need LG HB2, Hb4 or HB6 for that.
I'd recommend learning ohms law and how it works if you want to continue using mechs or to switched to a regulated mod.
Until you get an ohm meter I suggest you NOT......do not build anymore coil for that mod. I prefer not provoke some do gooder politician making laws or regulation to protect vapers from themselves.
Sent from my SCH-I605 using Tapatalk
Sent from my SCH-I605 using Tapatalk
It is dual cool I also have a imr 18650 which says that 1500mah 35a msx pulse 50 3.7v
And a efest 20a/35 wild any of these work with that build
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
No. only an LG HB2, Hb4, or HB6.
A general rule is don't use any battery that isn't a samsung or LG.
1) Battery manufacturers lie about their power. Don't believe the amp readings on batteries. Here is a list of batteries and their real ratings. (the green column is their safe amp rating)
2) only use samsung or lg batteries and only buy from known retailers as there are unsafe clones out there. illumn.com and liionwholesale.com are 2 good sites
3) why are you using a mech and not a regulated mod?
4) as another user suggested, get an ohm meter. You shouldn't be building for a mech without one ever
All of those batteries are good for about .2 to .25 ohms or higher. How many ohms do you have? I calculate about .18 ohms and 23 amps draw.. I wouldn't vape that.. but many competion vapers might.
Sent from my SCH-I605 using Tapatalk
Sent from my SCH-I605 using Tapatalk
I
have ohms reader it says in at 0.10 ohm
Out of the hb2 hb4 hb6 which would you adi even to go for ? Im going to order some nowNo. only an LG HB2, Hb4, or HB6.
A general rule is don't use any battery that isn't a samsung or LG.
1) Battery manufacturers lie about their power. Don't believe the amp readings on batteries. Here is a list of batteries and their real ratings. (the green column is their safe amp rating)
2) only use samsung or lg batteries and only buy from known retailers as there are unsafe clones out there. illumn.com and liionwholesale.com are 2 good sites
3) why are you using a mech and not a regulated mod?
4) as another user suggested, get an ohm meter. You shouldn't be building for a mech without one ever
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
at .1 there isn't a safe battery on the market for a mech. period. at 4.2 volts (fully charged battery) and .1 ohms thats 42 amps at 176 watts. You should never build lower then .15
If you can find the pink HB6 those ones. If not the rest are all the same. but again, your build isn't safe for any battery. Why not just use a regulated mod?
I have like 20 regulated mods lol I just like the tube mech mode the feel etc
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Fair Enough, but you really should learn ohms law and safe batteries. Your lucky you haven't blown your face off yet TBH. I'm not saying that to be a jerk either so don't take it that way. I'm saying that because you ran 42 amps through a 20 amp battery with no protections. Also your battery is no longer good and should be disposed of after doing that. 30 amps damages the battery
https://www.e-cigarette-forum.com/f...nly-a-20a-battery-damaged-at-over-30a.717124/
No offence taken thanks for your help buddy I'll throw this battery away order the hd2 and have a little bit more of a read up on ohms
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
HB2 or HB4 or HB6 and don't build lower then .15
HB6 for 4 dollars each from a good seller (this is where i buy all my batteries from) http://www.illumn.com/18650-lg-18650hb6-1500mah-high-discharge-flat-top.html
and again, don't build below .15