Billet Box Appreciation Thread

[dubya314]

Where I am at with Xeta's. The two new ones I got (sxk) are threaded way different than the two yftk's. They will not thread onto an ohm reader or mod. Arg, is my luck really this shitty? So..... I had to use the sxk pos. Post in the yftk body. Guess it's good I have accumulated so many spare parts huh? Lol. Not sure if it will show, but left is yftk thread, right is sxk. One down, one to go


Is anyone else using sxk's and do yours thread onto an ohm reader?

 

[dubya314]

@marter , forgot to add. I have cut my wicks at different lengths, and find it to vape fine any lengths, but also as shaddy said, on the longer side I am able to drain the boro more.

 

[marter]

Where I am at with Xeta's. The two new ones I got (sxk) are threaded way different than the two yftk's. They will not thread onto an ohm reader or mod. Arg, is my luck really this shitty? So..... I had to use the sxk pos. Post in the yftk body. Guess it's good I have accumulated so many spare parts huh? Lol. Not sure if it will show, but left is yftk thread, right is sxk. One down, one to go
View attachment 149382

Is anyone else using sxk's and do yours thread onto an ohm reader?

Mine's an SXK and it will thread onto my 521 mini V2.

@marter , forgot to add. I have cut my wicks at different lengths, and find it to vape fine any lengths, but also as shaddy said, on the longer side I am able to drain the boro more.

Kind of assumed it was about draining the tank rather than how it performs when it gets juice. So you have one side longer than the other? What happens when only one gets juice?

 

[dubya314]

Mine's an SXK and it will thread onto my 521 mini V2.


Kind of assumed it was about draining the tank rather than how it performs when it gets juice. So you have one side longer than the other? What happens when only one gets juice?

Nope, same length. Just meant I have had them just outside the rba, up to about 4mm past, and about 1/2 way between. All vaped fine

 

[dubya314]

Mine's an SXK and it will thread onto my 521 mini V2.


Kind of assumed it was about draining the tank rather than how it performs when it gets juice. So you have one side longer than the other? What happens when only one gets juice?

Hmm, I guess the threading is just off on mine then. Oh well, glad I have the other decks.

 

[gsmit1]

I find the air insert with the two small holes gives me exactly what I want in a tight MTL.

I leave my wicks about 4mm out on each side. Reduced juice capacity but I can drain the Boro to the last drop.

This is where I am for mtl too. Wicking too. I do like the 3mm chimney reducer though. The big difference is made under the build though.

I am going to try separating about 1/3 of the cotton on the bottom of the tail and letting it hang to the bottom of the tank, while cutting the rest to normal length. I'm thinking it will pull from the lower part of the tank while still not clogging anything. Not that there's anything bad about how it is now, but always looking for improvements right?

 

[gsmit1]

Mine's an SXK and it will thread onto my 521 mini V2.

As will mine. (I also use a 521 mini V2) That's very odd. At some point I'll have to check mine again, but I couldn't see any difference between the SXK and YFTK.

 

[Theboss]

Just came across this for sale, not familiar with it. Anyone have it? For 120 U.S it would be good to know if it's any good

 

[~Don~]

Just came across this on Alberts site, not familiar with it. Anyone have it? For 120 U.S it would be good to know if it's any good

View attachment 149389

Posted it earlier... it’s a few pages back.

It was the one I said I’d get if I had a BB and someone commented on not falling for it

Enabling that is


Sent from my iPhone using Tapatalk

 

[R3alJim Shady]

Just came across this for sale, not familiar with it. Anyone have it? For 120 U.S it would be good to know if it's any good

View attachment 149389

Looks like a mashup of the Insider wicking style, Exocet build deck, and Xeta/VapeShel air inserts.
All of those are winners save for the wicking, but I could be wrong. That's just my assessment from a glance.

Sent from the Death Star

 

[Theboss]

Posted it earlier... it’s a few pages back.

It was the one I said I’d get if I had a BB and someone commented on not falling for it

Enabling that is


Sent from my iPhone using Tapatalk

I missed your post.

That is funny!

 

[Jinx'd]

Where I am at with Xeta's. The two new ones I got (sxk) are threaded way different than the two yftk's. They will not thread onto an ohm reader or mod. Arg, is my luck really this shitty? So..... I had to use the sxk pos. Post in the yftk body. Guess it's good I have accumulated so many spare parts huh? Lol. Not sure if it will show, but left is yftk thread, right is sxk. One down, one to go
View attachment 149382

Is anyone else using sxk's and do yours thread onto an ohm reader?

after you said this, i checked mine, didn't go on a mod. then i check my 521, didn't go. THEN , i "pushed down" on the Xeta and it then threads on.

 

[gsmit1]

after you said this, i checked mine, didn't go on a mod. then i check my 521, didn't go. THEN , i "pushed down" on the Xeta and it then threads on.

You have to take up the travel on the positive 510 spring in whatever you screw it on to.

I haven't had mine fail to thread onto anything I've tried so far.

 

[dubya314]

after you said this, i checked mine, didn't go on a mod. then i check my 521, didn't go. THEN , i "pushed down" on the Xeta and it then threads on.

Oh yeah, I pushed. It ain't happening. I know it doesn't show well, but the threading is abour 2x finer on the one

 

[dubya314]

Ok, sure, let's make this even weirder. Tried on my 521 plus tab again, nope. Tried it on 4 or 5 other mods, nope. Tried it on my regular 521 tab, boom, right on. Reads it, fires it. Color me confused

 

[Mykreign]

Gonna dress up my RPG in a few minutes hopefully!

Sent from my SM-G950U using Tapatalk

 

[gsmit1]

Ok, sure, let's make this even weirder. Tried on my 521 plus tab again, nope. Tried it on 4 or 5 other mods, nope. Tried it on my regular 521 tab, boom, right on. Reads it, fires it. Color me confused

I think there's a Chinese pixie or something that sits over there waiting for your Xeta orders to make sure that if there are any defective units sitting around they go to you.

 

[Jinx'd]

I think there's a Chinese pixie or something that sits over there waiting for your Xeta orders to make sure that if there are any defective units sitting around they go to you.

lol. its prolly the depth of the pin.

 

[Jinx'd]

Gonna dress up my RPG in a few minutes hopefully!

your putting a bayonet on it !








ok, i will shut up now.

 

[Mykreign]

Huh I just noticed it doesn't have the two drill swirls at the top, but there are some other machine lines

Sent from my SM-G950U using Tapatalk

 

[Jinx'd]

two drill swirls

 

[dubya314]

lol. its prolly the depth of the pin.

It seems to be between the two tabs. The mods, idk. But I can built em and fire em, I'm good

 

[Jinx'd]

i have a question. my Dragon Poo, it has a little scuff about 1" above the button. are there any decals or something that guys are putting on there to pimp em out ?

 

[R3alJim Shady]

i have a question. my Dragon Poo, it has a little scuff about 1" above the button. are there any decals or something that guys are putting on there to pimp em out ?

Zapwrapz seem to be becoming popular for the BB

Sent from the Death Star

 

[Jinx'd]

the button plate, what is the dead hole for ?

 

[Jinx'd]

Zapwrapz seem to be becoming popular for the BB

Sent from the Death Star

not for the outside. i'm talking about under the door.

 

[Mykreign]

Gold and ultem. Built another xeta for MTL. This time brought the wick screws up a bit. Good so far.

Sent from my SM-G950U using Tapatalk

 

[R3alJim Shady]

not for the outside. i'm talking about under the door.

I knew what you meant

Sent from the Death Star

 

[Jinx'd]

I knew what you meant

Sent from the Death Star

well shit, look at that ! even for the door itself , whooda thunk .. i don't think i want something that covers nearly eveything. but i am going to have a look. thanx

 

[Jinx'd]

no, not under the door

 

[R3alJim Shady]

no, not under the door

I think some people are modding the door stickers to fit the insides.

Sent from the Death Star

 

[gsmit1]

Gold and ultem. Built another xeta for MTL. This time brought the wick screws up a bit. Good so far.

That looks great. I see you picked up some of those Berserker 1.5 styled drip tips too.

You'll get the Xeta down. I feel kinda bad because you took my recommendation on it.

 

[gsmit1]

Zapwrapz seem to be becoming popular for the BB

Sent from the Death Star

Zwraps has a monstrous selection too.

 

[Mykreign]

That looks great. I see you picked up some of those Berserker 1.5 styled drip tips too.

You'll get the Xeta down. I feel kinda bad because you took my recommendation on it.

I have like 9 berserker tips now lol.

And no worries man. Bobshere was enabling me on the xeta for like a month. It was bound to happen

Sent from my SM-G950U using Tapatalk

 

[gsmit1]

I have like 9 berserker tips now lol.

Those are perfectly decent tips for the price and perfect for the BB huh?

And no worries man. Bobshere was enabling me on the xeta for like a month. It was bound to happen.

Everybody wants folks to like what they recommend, but I sincerely can't believe you won't wind up loving it. The no leak thing is huge too. I took the boro out of my Rat Black last night after like 4 days and nary a smattering of condensation in there. I mean almost bone dry. I could just detect a hint of slipperiness on the very bottom.

 

[gsmit1]

I have like 9 berserker tips now lol.

You were the one who got me started on those too. You posted a pic of one your boxes a while back that had one on it and I was like "ohhhh, I have to find some of those."

The Fasttech ones are a little shorter obviously, but still a great buy.

 

[marter]

I have a confession to make. While I was waiting for my black SXK I went on 3fvape looking for something, and I noticed they had the orange BB listed, and one thing led to another, and it arrived today. I rationalized that even 2 SXK's, a couple xeta rbas, etc. I'm still below the cost of an authentic. Does that work? Anyway, here it is.

 

[marter]

When I ordered the orange (Kurbis?) SXK I decided to order a YFTK xeta since several were having problems with the SXK. It arrived today, and guess what they included? An extra positive post (lower right in pic); did anyone else's come with an extra post? It was kind of added to the box as an afterthought, not in one of the ziplock baggies.

 

[gsmit1]

...and one thing led to another,...

Ya don't say

 

[gsmit1]

...guess what they included? An extra positive post...

Why ya gotta do this to me? WHY?!?!?!

Is it thicker than the one on the deck?

 

[Nailz]

I have a confession to make. While I was waiting for my black SXK I went on 3fvape looking for something, and I noticed they had the orange BB listed, and one thing led to another, and it arrived today. I rationalized that even 2 SXK's, a couple xeta rbas, etc. I'm still below the cost of an authentic. Does that work? Anyway, here it is.
View attachment 149395

Nice, mine I added honeycomb doors and drip tip

 

[marter]

Why ya gotta do this to me? WHY?!?!?!

Is it thicker than the one on the deck?

I don't think so. It looks identical.

 

[marter]

Nice, mine I added honeycomb doors and drip tip

That's really nice. Damn nice.

 

[gsmit1]

Nice, mine I added honeycomb doors and drip tip

That's a good looking rig in anybody's book. They just released purple again too.

 

[gsmit1]

I don't think so. It looks identical.

They must have got wind of some of them breaking and are now including spares which I bet cost them less than a buck to produce. That's good, but not as good as cloning the beefed up post. Which I now bet is coming like @~Don~ said.

 

[marter]

That's a good looking rig in anybody's book. They just released purple again too.

The purple is shown as a preorder on 3fvape.

 

[gsmit1]

The purple is shown as a preorder on 3fvape.

That's right it's on preorder. I don't know if anybody else noticed, but YFTK also has rev4 clones.

 

[b.m.]

Damn,that was fast.Fasttech already has the orange SXK BB discontinued.I think it was only listed not even a month.Being SXK is releasing the purple again,i wonder if maybe they are doing 1 small run of each color again?I may grab a purple on the black friday sale,but then i'll be pissed if they release another batch of the bronze,as that is the one color i absolutely have to have haha,i figure that one will come out right after i spend all my money on the purple.

 

[zadlives]

Do y'all have any thoughts about the Delro? Not as pretty as a BB but uses boros and it's 75c.

 

[Vapanzeezer Scrooge]

Good or Bad idea?

Just designing some new panels for my polished BB, I have made some with windows showing Juice level and Screen, now I have polished internals I am thinking of expanding the screen windows for access to the buttons but not sure if it's a step too far, has anyone tried this?

New design will have a smaller teardrop juice window but a larger square with access for the buttons, in my mind I think it could be a step too far, your thoughts please?



These are some earlier rough concepts just showing the screen and too large juice window (since changed it to a narrow window)