I also made some Bantam Panels with the teardrop window, much prefer it, just got to Resin coat it next.
Become a Patron!
Billet Box Appreciation Thread
- Thread starter forza
- Start date
They look great! Did you think about making the tear drop flipped so that you can see more of the bottom of the boro?
Has anyone tried these SXK Coils?
They say for Bantam Box but they look like they are for the Kanger bridge? I like the larger wicking ports, shoved some in my basket as I like the odd stock coil build now and then.
https://www.fasttech.com/products/0...-replacement-ceramic-coil-head-for-bantam-30w
They say for Bantam Box but they look like they are for the Kanger bridge? I like the larger wicking ports, shoved some in my basket as I like the odd stock coil build now and then.
https://www.fasttech.com/products/0...-replacement-ceramic-coil-head-for-bantam-30w
Thank you
I actually did that originally but it seemed more practical in use seeing it go from full to low, the window is quite small but you can clearly see until there's almost no juice left and time to top up, I will try both options thanks.
(I also had a narrow even slot version which didn't look as good)
Is it gurgling when you take a pull? If not I think it's condensation.
I get A LOT of condensation in the 510 nut that pulls up through my drip tip
Sent from the Death Star
I get A LOT of condensation in the 510 nut that pulls up through my drip tip
Sent from the Death Star
what i am looking for is something along the lines of og BB lettering, doesn't have to be exact, or even close. i do have an idea to make my own that i will be looking into.
its personal preference. i think those look fine.
are you 3D printing your doors ?
i have 1. boy, is the hole small. are all of yours small ?
Idk if I'd say gurgling. It's pops just like all other builds I do.
Sent from my SM-G950U using Tapatalk
I think the delro is ugly...but it’s the only dna75c boro mod. There was one on reddit for sale...saw it yesterday...
Different isn’t a bad thing...just not my thing.
It’s like those that eat eggs with ketchup or Mac-n-cheese with ketchup...weird as hell...just not my thing
Sent from my iPad using Tapatalk
https://friendlyflipper.com/product/delro_d75c/what is this delro thing ?
eggs with ketchup
as kids, my brother did that.me out !
Just a mod some dude made that takes the BB boro.
Sent from my SM-G950U using Tapatalk
I think I will do a draft test print and see how it looks before printing high resolution.
Yeah 3D printing them then Resin Coating.
i could hardly get air through it, least not enough to do shit. but, i drilled that fucker out, about the same size as the stocker.
but, in doing so, the top came off. i did not realize it is threaded on. idk what i am going to put bacck on there. maybe just glue it back on, or make something else for it.
how long does it take to print a quality door, and how much does that amount of material cost ya ?
There is a guy on the SXK Billet box group on FB that has them,not sure what he charges for them,and he's in the U.K.,but i just seen the post yesterday.
I cleaned out the 510 nut and it fixed it. Idk why the vapeshell doesn't do that though.
Sent from my SM-G950U using Tapatalk
Hell yeah! I am loving my orange. My current favorite mod, and I don't see that changing any time soon. You think you will get into panels, or are you happy with stocks? I like the stock on the orange alot, just favoring transparent stuff.
That is a sweet looking set up!Nice, mine I added honeycomb doors and drip tip
I think they look fantastic. Personally, I wouldn't change a thing.
Well, before I saw those honeycomb panels on @Nailz's orange BB I would have said the stock panels are fine. But now....I can't unsee them.
I do like the stock panels, especially on my black BB. I'll probably stay with those, but those honeycombs are sweet on the orange. Wish I'd ordered them with the BB.
You lucky dog, I'm jelly... But, it at least makes me think they will start selling the post alone, which I could desperately use lol.
I get that too, just figure it's better than around the boro, idk. When I get popping, I just try to go a bit tighter with the wick, usually works.
Damn fine! Where did you get those panels btw?That was a old pic, since then, have added a copper button too, for more matchy
There is more orange in the panels, just doesn't show well in pics.
Excuse the dusty top, was using at work.
View attachment 149443
I agree, looks great. They had them at ft?
Just keep pressing the replies on posts, and the quotes will go into the reply box, like this
I got them from provape - https://www.provapes.com/collection...omb-doors-brown-orange?variant=12229426905191
Test
Thank you, on both accountsJust keep pressing the replies on posts, and the quotes will go into the reply box, like this
I got them from provape - https://www.provapes.com/collection...omb-doors-brown-orange?variant=12229426905191
Stop it.That was a old pic, since then, have added a copper button too, for more matchy
There is more orange in the panels, just doesn't show well in pics.
Excuse the dusty top, was using at work.
View attachment 149443
3Fvape.
They're £24.99 ($31.91) at Provape. They list them as "Brown/orange". The 3fvape panels are just listed as orange @ $20.19. Both made by SXK but looks like they are different colors.
The ones at 3F look like they have yellow/green swirled with the orange.I started to get those ones,then found the orange/brown at Provapes.I would not of liked the yellow/green ones.
I really like the black panels on my orange one,but i like the feel of the resin panels better,so i just ordered some of the clear ones,and will use that tail light tint paint to make them a dark transparent black.Then i'll get exactly what i want,plain black panels that are nice and smooth and shiny haha.
Blood on the coil? You need to stop using power tools to wind coils
SS is springy. Can be harder to work in there for a 3mm. To start I would go 2.5mm and 6 wraps. Legs down of course. For 2.5 I would pull those juiceflow screws up a bit. Wicks snug and a couple few mm outside the ports.
Yes provape is not cheap, they a UK based site, but they do have some good BB accessories you can't find in stock at other places.
Blood on the coil? You need to stop using power tools to wind coils
SS is springy. Can be harder to work in there for a 3mm. To start I would go 2.5mm and 6 wraps. Legs down of course. For 2.5 I would pull those juiceflow screws up a bit. Wicks snug and a couple few mm outside the ports.
the drill was the easy part.
my first ever coil build.
Gently dry pulse/glow it and see if you have any hot spots on that left hand wrap.
EDIT: I now see those are 2 different pics and the spacing is more even in the one on the right.
Last edited:
those pics are kinda crap. i did pulse it, looked pretty good.
yeah, i was real carefull. and yes, i did that = wiggle-snug, wiggle-snug, etc, etc, etc.
I agree.I was able to get a couple sets of the SXK panels that every other place is out of stock on,but Provapes had them.Prices really aren't too bad,i think i paid around $35 or so shipped for each set.
Printing on the highest resolution takes around 8 hours a pair, material is dirt cheap, probably just under $1, the electricity and running costs are more.
Printing on draft quality to proof takes about half that time.