Become a Patron!
DotMod Petri V2
- Thread starter CrazyChef
- Start date
Just joking, but it would be nice too see a deck like that in an rta, there are no gold plated rtas out there yet or are there?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I think the hurricane has one
It looks considerably less airy but we shall see, I will report the flow differences when I get it in
Got the dot cap v2 today and I'm loving it, only thing I don't like is the plastic piece goes over the black cap so it does condensate....but what vape doesn't really
Flow is way different than the v1 cap but wonderful to be able to change the flow pending on how you wanna roll, was it worth it....eh it's really close to the same bore as the stock cap with the friction fit wide bore petri tip, BUT it's a petri accessory so fuck yea it was worth it
Next to the v1
And the district5 summit cap next to the v1 and v2
I highly recommend all 3....well just mostly because I have a petri addiction, the dot cap v1 with the cloud cap is a little much but the v2 tones it down to perfect
Flow is way different than the v1 cap but wonderful to be able to change the flow pending on how you wanna roll, was it worth it....eh it's really close to the same bore as the stock cap with the friction fit wide bore petri tip, BUT it's a petri accessory so fuck yea it was worth it
Next to the v1
And the district5 summit cap next to the v1 and v2
I highly recommend all 3....well just mostly because I have a petri addiction, the dot cap v1 with the cloud cap is a little much but the v2 tones it down to perfect
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
How long have you had it?? When I first got it I learned it's very build specific.....
It's by far the best rda I own and I have 3
but you know vaping preference is so different, don't give up man!!!!!
Im trying! I cant give up. It pisses me off though.
Its like made for huge builds but the post holes arent havin it..
Right now i have regulat 24n80 paralleled with 26n80 and its decent.
Its funny how you get used to ramp up cause normal coils are too fast for me now haha im used to those few seconds kinda hits.
Im going to try in a couple days to get some fused clappies with a stager and see if itll fit in the post...
Edit: ive had it for a couple months or 3 or 4 i dunno a while...
Sent from my SM-N920T using Tapatalk
Its like made for huge builds but the post holes arent havin it..
Right now i have regulat 24n80 paralleled with 26n80 and its decent.
Its funny how you get used to ramp up cause normal coils are too fast for me now haha im used to those few seconds kinda hits.
Im going to try in a couple days to get some fused clappies with a stager and see if itll fit in the post...
Edit: ive had it for a couple months or 3 or 4 i dunno a while...
Sent from my SM-N920T using Tapatalk
I went out with a girl in college that had a vagina that could possibly blow some vapor. I know it could pick up a roll of quarters.There is if there's vapor coming off of it.
Sent from my iPhone using Tapatalk
Pop Ping Pong Balls across the room too??
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
that's really wide!!
How do you flatten coils like this? Hammer? Dremel? Lazerbeams? Looks dope, does it improve the vape quality?
Wetsanding and Polishing...Its not flattening by force/pressure, just the outer surface is smoothed out flat
Nice, cant believe theres still juice making it to the surface, they look airtight
The grits that you use are usually "wetsanding paper", thats why I said that. There isnt a need for using water or oil but thats what that form of paper is typically labeled, atleast when using it for auto purposes. You can use Jewelers polishing cloths and so on also but paper is easily found at walmart in the car aisle and its cheap, usually you can get packs of 800/1000/1500/2000 as a all in one for around 6 bucks.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
That's just the visual effect. They're wrapped no differently than am unpolished coil.Nice, cant believe theres still juice making it to the surface, they look airtight
Really? I assumed you just bought flat wire. Seems like a LOT of work to sand/polish a roll of wire down like that by hand. How much of a difference is there to the vape? Ive got a bunch of super high grit paper/pads I use to polish my guitar frets (ranging from 80 straight up to 12000) so I wouldnt mind giving it a shot if its really an improvement. If its just mostly for looks, well, Im a function over form kinda guy.
Any advice/tips/tutorials on going it right and best method for getting it even? Work well with regular kanthal?
Its for Coilporn bud...Most of the wire we make for pics are mostly for pics.
Its a form of art in itself.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
There IS a slight difference in flavor with polished coils. Similar to using ribbon vs. round wire enhances certain nuances of your juice. Is it worth the work for the flavor enhancements? Nope. Like Ray said, it's mostly for the coil porn aspect. I'm primarily a function over form dude myself - you can see it in most of my builds. But I needed something to show off the Petri V2 on IG, so I figured I'd do a couple of polished builds just for the heck of it.
I didnt mean to offend or sound deprecating if thats how I came across. Was just curious about it as Ive never tried it myself. It is pretty as all hell though even if it does little to nothing extra. Good work.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Not at all. It's just another aspect of the current discussion.
CJ
VU Webmaster
Staff member
VU Senior Leadership
VU Senior Administrator
VU Administrator
Senior Moderator
VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
As far as I know, yes only in black. But you can use other caps from previous versions.
jhhollier
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Member For 5 Years
DotMod posted a pic of a gold version on Instagram with the comment available now. I also emailed them and asked if the Cloud Cap they made for the V1/V1.5 would work with the V2 and was told yes but they are also working on a new Cloud Cap.
Why wouldnt it work? All the Petri's are the same thing with slight changes...
jhhollier
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
Member For 5 Years
I'd rather be 100% before buying an accessory
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Nice, function and beauty...
Yep, <10 bucks. Actually got mine from 3f, probably the same. Too airy for me, I drilled out the V1 clone holes to 1/8" and it's just about right. The authentic V2 will never see a drill bit though...
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
I have the clone from 3FVape with the cloud cap, also. I just can't bring myself to put it on an authentic base. They fit perfectly, though...
I did a quick comparison review HERE
Im not sure if Im willing to shell out for the Authentic yet so Ill order the clone thanks to your comparison...how did you get more authentic screws from and will they fit the clone?
Unless you have clever slender fingers like an elf, those authentic screws are just a look good thing. I have to use a screwdriver on them.
Your supposed to use Pliers on them...screwdriver to snug them then pliers to tighten further.
Doh! I knew that... lol. Guess that would avoid stripping the screwdriver slots.