Become a Patron!

ECF Refugee Thread All welcome though

Status
Not open for further replies.

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I'm all about flavor too. But be careful with SS on the mechanical mods. The resistance is going to be about half that as kanthal roughly. Also, gentle on the dry firing. Just a very dull orange glow is all you should be going for. Not that white hot madness people do with the kanthal

Sent from my SM-G935V using Tapatalk

Does the lower resistance on mechs apply equally to hybrids (pin touches the battery?)
 

advancedvapesupply

Silver Contributor
Member For 3 Years
Member For 2 Years
Unlisted Vendor
OK after looking at the site I'm confused too many choices. So I will put it stu, what do you recommend.

Sent from my SM-T817V using Tapatalk
Are you looking for normal round wire? If so, I'd do 24, 26, 28 in 316L. If you're looking for something more high performance, I'd recommend 28x2/40 fused claptons, or vertebraid/tribraid depending on your setup

Sent from my SM-G935V using Tapatalk
 

advancedvapesupply

Silver Contributor
Member For 3 Years
Member For 2 Years
Unlisted Vendor
Just buy it from Stuart. He's not a bad guy for beenin' a Sloth and all
747e97dfd2258b30fc9885516564cf97.jpg
8ee08d5165d3dab94739e71583e2f3b7.jpg
 

Boden

Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
@advancedvapesupply

I was just doing some thinkin. Kanthal A1 has a density of 7.1g/cm^3 and 316SS is 7.9g/cm^3. If you had two coils, say 26g 3mm ID 8 wrap, one made of Kanthal one of 316SS, the kanthal coil would have less thermal mass therefor heat up faster.

Not by much but a little ~10%

Edit: At the same watts of heat output
 
Last edited:

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hey @JuicyLucy tell me what you think about your Coppervape(s) as far as build quality, etc. Totally worth it to you I assume?

Get two - you should have no problem selling for what you bought for - or more - if you don't like it.

Nice little squonker.

The bodies are well machined and solid. Mechanicals are easily accessible and it has hit everything I've ever put on it, which is everything. Even regular attys, like the Boreas, lol.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I'm getting one, already committed*, just debating on two vs one. For redundancy sake ya know.

*wife is starting to think I should, in fact, be committed to some sort of rehab program for vape gear buyers.

Oh yeah, and GFY

The rest of you Fugees too.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Morning and GFYs. And those who don't like my opinions, GFY with a hairbrush. :)

Got my big box from ECX today -- shoulda seen me flying outta that bed at the crack of 11:15 when I heard the mailtruck. :)

Does anyone know, is there ANY place that offers both Molinberry and FA flavors? There are 2 more flavors I really really want, but I really hate the idea of making a 1 10ml-bottle order from anywhere, the shipping is so costly. Not that I don't have the money, because strangely enough, I do, but I'm just cheap that way, and it's my firm belief that wasting money is no way to STAY flush.

Andria

ETA: conversely -- are there any flavors from Molinberry other than Glamour Chocolate that really must be tried? I'm a big fan of their Glamour Choc, mostly because it's the only choc flavor I've been able to taste in a vape, so if there are any other real goodies, I'd like to try them.

And same for FA -- some of their BESTEST flavors? I want to order their Marzipan for one of the recipes that HIC posted recently, but FA isn't a brand that I normally use a real lot of, so I don't know which are their VERY best flavors.
 
Status
Not open for further replies.

VU Sponsors

Top