Become a Patron!
Efusion duo 133
- Thread starter SteelDriver
- Start date
I know you have to change the number of cells for the device to work. As for capacity and discharge curve, I believe that only affects rge accuracy of the battery meter. Since I would have to change the number of cells I would probably also change all of them. When the mod is recharging, it monitors the voltage of each individual cell so I really think the only mandatory thing you have to do is tell the mod how many cells are being used.
I have the DX200 with 3s Lipo and 2 x 18650 battery cradle (accessory). When I switched to the 18650 option I changed everything. Since switching over, I've never switched it back. Then again I have 3 other DNA200 mods that run on a 3s Lipo pack so I saw no reason to switch back. My DX200 is my 2 x 18650 mod, the Reuleaux 3 x 18650 mod (the ones I use if I need longer battery life or the ability to switch cells on the fly). I have two 900mah 3s Lipos and a 1300mah 3s Lipo. I have all my bases covered.
Cheers,
Steve
Ok, that makes sense. I was wondering how does it know what voltage to charge the cells to, as well as when the batteries are to low, BUT in thinking about it, that should be covered by the number of cells, and the Cell Soft cutoff????I know you have to change the number of cells for the device to work. As for capacity and discharge curve, I believe that only affects rge accuracy of the battery meter. Since I would have to change the number of cells I would probably also change all of them. When the mod is recharging, it monitors the voltage of each individual cell so I really think the only mandatory thing you have to do is tell the mod how many cells are being used.
I have the DX200 with 3s Lipo and 2 x 18650 battery cradle (accessory). When I switched to the 18650 option I changed everything. Since switching over, I've never switched it back. Then again I have 3 other DNA200 mods that run on a 3s Lipo pack so I saw no reason to switch back. My DX200 is my 2 x 18650 mod, the Reuleaux 3 x 18650 mod (the ones I use if I need longer battery life or the ability to switch cells on the fly). I have two 900mah 3s Lipos and a 1300mah 3s Lipo. I have all my bases covered.
Cheers,
Steve
Thank you;
Ok, sorry I didn't see that! I did take a look on their site though and didn't see anything.
Someone posted about making their ownn out of veneer. Would be very interested in how that goes.
I have a vs and a efusion.had a vt 200 .Going from vs to efusion takes a little getting used to. Efusion is bigger and fire button doesn't stick out. It's not uncomfortable I have big hands it's just different. Build is excellent on efusion. Vt 200 very comfortable in hand but battery life sucked. Vs comfortable battery life can be lived with due to 2 amp charging.
Read through our previous posts for pics and build comments. I think we all agree so far. Like @SteelDriver I also have big hands so it's very comfortable to me. Works like a charm. I think we all agree the negative is the panels. And I don't care about that since you can get something elsewhere and I'm happy with the carbon fiber ones that come installed anyway. Would I buy another one? Probably depends on the price. I got a great deal. I love my G2 more even though it's ugly.
Keep in mind these are early impressions
DNA200 OPERATIONAL MANUAL
MAIN
Up/Down (5 sec) lock wattage or temp (Temp-Dominant dependent)
Up/Down (5 sec) then twice Up (or Down) to change Profile
LOCK (5 clicks)
Up/Down (5 sec) adjusts temp or wattage (Temp-Dominant dependent)
Fire/Up (5 sec) lock ohms
Fire/Dn (5 sec) Stealth/Normal
Fire/UD (5 sec) Change Material
Should be drop down menu on connection box that pops up.
Whoa! Died as like lights out or like doesn't fire? What does it do when connected through EScribe?
Died as in lights out. Was working like a champ ever since I got it. Used it every single day. Was using it this morning. Picked it up to vape after a break and nothing. Changed batts. Still nothing. Won't power up.
If you can get it to power up in Escribe then the fuse has probably blown.
Cheers,
Steve
Hey Steve. I'll connect and check. But the odd thing is is worked earlier in the morning. All I did was set it on my desk lol.
Sounds like the fuse blew. The way I understand it the fuse is between the Battery and board but the USB bypasses the fuse.
One other possibility might be the connector that connects the battery sled to the board may have come loose. Id look at that, might just have to push the connection tighter a bit. That would be nice if it's only that.
Check out the video at about the 5:55 mark to see what I'm referring to.
Cheers,
Steve
nope tight as can be. I'm sure it's the fuse. Funny thing is after I contacted the vendor about it I got an email from them that my vt75 shipped.
What were you running before this for settings and with what battery setup?
Just FYI mine is still kicking and it's my go to mod right now.
Plain wattage. Around 60 w and 18650's.
Thanks for the info.... been running 47W and 18650's on mine.
Thanks hvymtl
So duo came yesterday,the damn thing was rattling, I thought there was a loose piece inside the package,
I opened the package it fucking naked
Carbon is not installed, well I guess reading from the comments that was a good thing. But it's fucking annoying, the carbon fiber didn't come with 3m tape or anything to stick them on
ITs a BLACK DUO BTW!!
back to the buttons, they were crap!
Rattling like a fucking rattle snake, for how much I paid for it, I shouldn't have any rattling at all, like i told them
This is not 2013 this is 2016... I'm ocd I don't like clinking, rAtling don't like that shit, I was excited about this effusion, it turn out to be DISAPPOINTMENT!!
I contacted vendor, I will be returning the duo tom.. I told vendor
IF YOU CANT FIND ME one THAT DOESN'T RATTLE GIVE MY FUCKING MONEY BACK!! Fucking done with this aluminum crap...I should've waited for the new WISMEC DNA, not the RELEAUX ..
I emailed lost VAPE,I twitted them, I dm them on IG... They shouldn't be sending vendors crappy products, that shit not right!!!
VAPE ON
So duo came yesterday,the damn thing was rattling, I thought there was a loose piece inside the package,
I opened the package it fucking naked
Carbon is not installed, well I guess reading from the comments that was a good thing. But it's fucking annoying, the carbon fiber didn't come with 3m tape or anything to stick them on
ITs a BLACK DUO BTW!!
back to the buttons, they were crap!
Rattling like a fucking rattle snake, for how much I paid for it, I shouldn't have any rattling at all, like i told them
This is not 2013 this is 2016... I'm ocd I don't like clinking, rAtling don't like that shit, I was excited about this effusion, it turn out to be DISAPPOINTMENT!!
I contacted vendor, I will be returning the duo tom.. I told vendor
IF YOU CANT FIND ME one THAT DOESN'T RATTLE GIVE MY FUCKING MONEY BACK!! Fucking done with this aluminum crap...I should've waited for the new WISMEC DNA, not the RELEAUX ..
I emailed lost VAPE,I twitted them, I dm them on IG... They shouldn't be sending vendors crappy products, that shit not right!!!
VAPE ON
What Wismec DNA (besides the Reuleaux)? Evolv is currently suing Wismec and I would be very surprised if there will be anymore Wismec products with a DNA board in them.
Wtf?!
No wonder they created rx200s?!
I was told there was gonna be another Wismec DNA not design by jaybo
Are you thinking of the one Lost Vape is about to release (I think it's the Triad)? It's got the same shape as the Reuleaux but with a centered, raised 510.
Cheers,
Steve
Edit @ej1024 here's a link to the thread that talks about that mod. Seems like an improved version of the Reuleaux and it will be using a DNA200 chip.
http://vapingunderground.com/threads/lost-vape-triade-dna200.237024/
Last edited:
I'm staying away from lost VAPE, I don't want another RELEAUX looking mod, I have 2 already, that's why the duo was perfect and fucked up!!
Sorry to hear disappointed people mine is chucking along nicely.
If you guys are looking for a few more panel options for your Duo you guys can look over this site. I have not done it for awhile but you used to be able to request up to 5 different sample sheets and then at checkout double each of your 5 choices. I looked it over real quick and did not see any abalone but they do have some stone and wood options.
http://solutions.3m.com/wps/portal/...4857497&rt=c3&WT.mc_id=SG15_relaunch_redirect
http://solutions.3m.com/wps/portal/...4857497&rt=c3&WT.mc_id=SG15_relaunch_redirect
I'm not saying all of the duo are bad,
I just can't stand the rattles, I tried both 18650 and LIPO and it felt really good in the hand, big difference from my RELEUAXs, I researched around,button rattles really exist some folks aren't bothered by it, some folks ignored it, some folks can live with it, NOT ME, hopefully mfs find me one that doesn't rattle and shit...
To be continued....
VAPE ON
I just can't stand the rattles, I tried both 18650 and LIPO and it felt really good in the hand, big difference from my RELEUAXs, I researched around,button rattles really exist some folks aren't bothered by it, some folks ignored it, some folks can live with it, NOT ME, hopefully mfs find me one that doesn't rattle and shit...
To be continued....
VAPE ON
Lipos or Duals 18650? Are you guys charging (and it's safe to) the dual 18650 thought the USB?Here she is
VAPE ON
LIPOs bro...
I don't have this particular DNA200 mod but I have quite a few DNA200's that use Lipos and 18650's. I would normally not charge my 18650's in a mod but in the DNA200 case, it is safe. They have a very good built in balanced charger (The DNA200 chip). However I usually charge my 18650's with a charger (faster) and Lipos on board. Hope that helps!
Cheers,
Steve
Yes, it helped! Thanks!
Here she is
VAPE ON
Nice socks.
Hahaha
Hope it's a good one.
You have other dnas, right? How's this one compare?
I have a Vapor shark and I had a vt200. Liked the vt good in hand lightweight good build but battery life sucked. Vapor shark is very nice in hand built great battery can be lived with due to 2 amp charging. The duo is bigger in hand but not uncomfortable just different feel and built good as Vapor shark.
Thanks. The VS is something I've always thought about getting but never did due to the battery even though it's got 2 amp charging. Duo was comfortable for me since I've got big hands too.
I found them here by doing a goggle search. It was the first one I saw. I didn't keep looking to see if there were more places selling them. I searched: Abalone panels for effusion duo.
http://www.vapegeek.co.uk/Abalone-Panels-for-Efusion-DUO-46.htm
Cheers,
Steve