Gemini on a ego one battery

[iki]

can i use a gemini vaporesso atomizer on the ego one battery?

 

[Zamazam]

As long as the resistance is more that .3 Ohms, Yes.

 

[iki]

Do

As long as the resistance is more that .3 Ohms, Yes.

Do you know how many wraps i got to make on a nickel ni200 wire to be .3 ohms?

 

[JERUS]

Do


Do you know how many wraps i got to make on a nickel ni200 wire to be .3 ohms?

with 26g ni200 and 3mm ID you'd need 33 wraps... don't use ni200! nickel is temp control only. Nichrome which has nickel in it (n80 as an abbreviation) is good in power mode, but just stay away from nickel and titanium unless you're going for temp control and know what you're doing. Otherwise you'll just end up with either melted or unfirable coils.

 

[iki]

with 26g ni200 and 3mm ID you'd need 33 wraps... don't use ni200! nickel is temp control only. Nichrome which has nickel in it (n80 as an abbreviation) is good in power mode, but just stay away from nickel and titanium unless you're going for temp control and know what you're doing. Otherwise you'll just end up with either melted or unfirable coils.

Ok i will! And how many wraps on a ss wire or a kanthal wire?

 

[JERUS]

http://www.steam-engine.org/coil.asp

Take a look at that. But with dual coils and 26g 316L SS at 3mmID you should need about 8 wraps per coil, and Kanthal A1 it'd be 4 wraps per coil same specs.

 

[iki]

http://www.steam-engine.org/coil.asp

Take a look at that. But with dual coils and 26g 316L SS at 3mmID you should need about 8 wraps per coil, and Kanthal A1 it'd be 4 wraps per coil same specs.

What about 24G how many wraps on a ss coil?

 

[JERUS]

What about 24G how many wraps on a ss coil?

Pop it in to steam engine, choose your wire type, then the gauge, then single or dual coil, input your desired resistance, then put the diameter of what you're going to wrap your coil around for "inner diameter" and it should give you an answer.

http://www.steam-engine.org/coil.asp?mat=ss316l&s=dp&r=0.3&awg=24&id=3