Become a Patron!
Help (RDA)
- Thread starter RhysD
- Start date
You would need to get a mouth to lung rda/tank. And you will need a coil close to or above 1 ohm.
Although there are some people who like a direct lung hit at less than 40 watts so ultimately it's up to your preference
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
To be honest 40 watts is going to be too low for the design of drippers. You should probably look to upgrade to a 100 watt mod. then you can build good on drippers at about 60-80 watts for a DTL hit
Incorrect there at alot of older model drippers with reduced chambers and smaller air holes. IGO-W comes to mind there is also other versions if the igo. When I started the highest watt mod was like 15 or less it's been a while.
Edit to add if you meant today's drippers then yes you are mostly correct. Personally I don't do the low wattage vape but I'm sure there are some drippers designed for it today though I don't know any. Oh aren't there some single coil drippers? That could be used at less than 40 watts if built correctly. I enjoy dual coils so I'm no help there either.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
lol it depends. but even older ones not so much. one of my 1st RDAs was a patriot and i had an 11 watt evic and it wasn't near enough to power it even with a single coil for any decent vape. thats why i switched to mechs and starting squeezing 4 coils in the patriot to get a good vape out of it. I didn't go back to regulated mods until about 2 years ago because they came a long way in those 3 years i was away from them. its possible he might me able to find a small RDA to get a good vape at 40 watts but maxing it out isn't gonna give him much battery life
For 40W I would use a small chamber flavor RDA like the Derringer.
It's too small to hold Claptons but a single or dual twisted coils will do nicely.
It's too small to hold Claptons but a single or dual twisted coils will do nicely.
Yeah I agree those vapes weren't the best and you said your self at 11 watts you weren't happy but what about 20 or 30 watts?
While I do agree that a 100 watt mod is ideal and you can get them for cheap. The OP asked specifically for his mod and since he has that mod I wanted to let him know it's possible. Plus we have to start some where and I'd rather a guy start with 1ohm coils than .2 or .3 ohm.
While I do agree that a 100 watt mod is ideal and you can get them for cheap. The OP asked specifically for his mod and since he has that mod I wanted to let him know it's possible. Plus we have to start some where and I'd rather a guy start with 1ohm coils than .2 or .3 ohm.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
i didn't set 11 watts. that was the max lol
Well igo w, magma and like nightshade said the Derringer. Look for small rda size and short in height. Single coil might be better but dual is possible again it has to do with your build.
Yeah i know what I mean is if you had 40 watts the vape might be better then.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
could be but with my mech set up it was around 60 watts to get a good vape.