Does anyone know what causes a mod to auto fire? I was playing with my fsk settings this morning and took a rip off the g2 that wouldn't stop. Had to disconnect the atty to stop it. I turned the mod off then back on and it seemed fine from there besides my burnt to hell cotton. Would leaking cause it? When I took it off there was some condensation around the 510 ring at the top. Didn't think anything was inside. And it hasn't had any issues since. Should I be concerned?
Become a Patron!
Hohm Wrecker G2 and Slice first time users guide
- Thread starter mjag
- Start date
-
- Tags
- fsk hohmtech slice wrecker g2
Was the fire button sticking? I've never heard of a G2 auto firing.
Sent from my SAMSUNG-SM-G900A using Tapatalk
With the movement on my buttons on the slice I could see the button get stuck. Don't know if the g2 is as sloppy as the slice. Love my slice even with the buttons being sloppy.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I'm down to 6mg and didn't look when I grabbed a bottle this morning. I took a big vape on my tfv8 and thought. Damn. That's harsh. Turns out it was an old bottle of 18mg. Gonna be buzzing all day. LoL
sent from craptastic taptalk
It's hard to tell if the button stuck as it's such low profile. I was also in a bit of a panic unscrewing my atty when it happened so didn't really think about it. All I did was unscrew, turn off turn back on and seemed to be resolved. But again it's possible I hit the button again in my frenzy and unstuck a stuck button. I had this problem one time with my Kbox 200 and haven't had the issue since. My sub box which was my first mod had a perminant issue which volcano'ed my juice all over my laptop and made a battery vent. I moved to the Kbox 200 after that. But ic been using my g2 all day since the incident and haven't had further issues. But I am making sure to turn it off while I'm away from the mod just encase.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
usually an auto fire is caused by a short on the chip if it's not a stuck button.
Ok, I'll keep an eye on it. It's possible the button got stuck. I would think if the chip had a short I'd be having more issues and it's running the best iv seen so far. Got my tfv8 running temp control perfectly in xxx mode.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
sounds like that's all it was
I emailed ht just to be sure and got this in response...
Sounds like your 510 was pushed down too far. Take off the back plate and
see if the 510 pin is touching the battery bridge...if it is, it will auto
fire. We've not seen this before, but if your 510 pin is too long, it could
do this....so you'd need to adjust your pin.
I don't think this is the issue as the avocado has a rather small 510 pin and is smaller then my tfv8 which works fine. I would like to check though out of curiosity but have nvr taken any mods apart. Is the back plate the plate under the battery door held by 4 screws? If so, has anyone removed this before, I don't wanna pull it off and have shit go flying and be shit out of luck.
Sounds like your 510 was pushed down too far. Take off the back plate and
see if the 510 pin is touching the battery bridge...if it is, it will auto
fire. We've not seen this before, but if your 510 pin is too long, it could
do this....so you'd need to adjust your pin.
I don't think this is the issue as the avocado has a rather small 510 pin and is smaller then my tfv8 which works fine. I would like to check though out of curiosity but have nvr taken any mods apart. Is the back plate the plate under the battery door held by 4 screws? If so, has anyone removed this before, I don't wanna pull it off and have shit go flying and be shit out of luck.
Does anyone have a working discount code for vapor cube anymore? The other ones don't work any longer
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Yeah, I ordered a Orange LE G2 the same day @gakudzu did, $60 shipped and payment via paypal: https://www.mainevaporroom.com/product-page/hohmtech-hohmwrecker-g2
That price is actually better than the last vaporcube sale price
That price is actually better than the last vaporcube sale price
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Thanks for that link I ordered me a g2. I have a slice and like it so figured why not get the hohm wrecker!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Have either of @SirRichardRear or @
Mjag gotten update on their g2 or shipping info?
Sent from my iPhone using Tapatalk
Mjag gotten update on their g2 or shipping info?
Sent from my iPhone using Tapatalk
I ordered one on Wed. Haven't heard anything after the order was acknowledged. Was going to drop them a note around noon-ish.
Sent from my iPhone using Tapatalk
I was planning on calling them. The phone number is on their site or on the email.
Sent from my iPhone using Tapatalk
Mjag and I ordered on Saturday, and we both received ours on Wednesday.
Ok that helps did they update tracking or did it just show up?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
They sent tracking info on Tuesday, even though they shipped Monday.
I've read all 108 pages of the G2 thread but I can't remember to save my life...is there any difference in G2 SE and LE other than the colored markings?
Does anyone notice that even with a fully charged battery on the Slice the battery meter on the mod reads 87% not 100%? Doesn't matter what battery, I have the iJoy 26650 & the Hohmtech 26650 & a 18650 with an adaptor.
I think the LE has 2amp charging.
That's the only difference. The symbols on the LE are actually machined into the surface, exposing the raw aluminum. Not only does it fancy it up, it makes it more "grippy".
That's just for the Slice. The G2 doesn't have onboard charging.
Mine reads 100%.
Thanks!
What could be wrong with mine?
Are you charging through the usb, or on a separate charger?
A separate charger a Nitecore.
My slice also reads 100%
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Oh no! Wonder what could be wrong with mine?
If it's the i4, it may only be charging to 3.7V. I diddled with my i4 when I first got it, and accidentally set it to 3.7. I reset it to 4.2, and it's fine now.
It is the d4.
I just put it back in the charger and it's reading 4.10v
Yes it's 1.2.4
I guess I'll have to call them.
That's a good idea! Going to try now.
Let us know what happens.
Ok when it reaches 100% using the USB to charge does the lightning bolt stop? Because the lightning bolt is still on but it says 100% & if I unplug it & vape on it after a few hits the battery is reading 94%.