SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Yeah i get what you were saying just commenting on the small size factor. Which again I think it would be cool and those do need to be updated because there are a lot of people including me who are/were turned off of ecigs due to the shitty disposable cigalikes.I get that, but there is always room for different devices, I have an AIO by Joytech for example, and bigger mods like this and the RX200.
All I mean is tech really can advance in incredible ways and it's a shame we might not be seeing that unless people find loop holes.
Yeah i get what you were saying just commenting on the small size factor. Which again I think it would be cool and those do need to be updated because there are a lot of people including me who are/were turned off of ecigs due to the shitty disposable cigalikes.
Check out the hohm skillet. They're getting good reviewsYeah the best we really got is those regulated smallish pen ones that Innokin/Joyteck/Smok makes, they are still sorta big though, not to big but it would be nice to have something in a couple years that is amazing and tiny.
That said I love my big mods.
I just made a video explaining how to use it. Check it out on my channel.Just got a Hohm wrecker, for some reason it randomly stopped firing while in kanthol temp mode, and it seems like its only reading the watts when in xxx. I didnt change anything did I mess something up?
If what's happening is when you pus the fire button and the wattage reads 00 then most of the time your fsk or wattage may need to be turned up slightly. If your using an RDA then your cotton may be a little dry.Just got a Hohm wrecker, for some reason it randomly stopped firing while in kanthol temp mode, and it seems like its only reading the watts when in xxx. I didnt change anything did I mess something up?
I just made a video explaining how to use it. Check it out on my channel.
Sent from my SM-G935V using Tapatalk
If what's happening is when you pus the fire button and the wattage reads 00 then most of the time your fsk or wattage may need to be turned up slightly. If your using an RDA then your cotton may be a little dry.
That's the temp control kicking in. If set up properly Temp control wont let the mod fire if there's dry cottonOk I didn't know it would read that the cotton was dry maybe thats it. Because it was reading at 00, and I made adjustments to all the settings to get my good vape back but when I had it on 171watts 450F and 6.5FSK it was great then randomly stopped
That's the temp control kicking in. If set up properly Temp control wont let the mod fire if there's dry cotton
Forgot to reset resistance? Check out the video I made for instructionsThe thing is i tried it on my Combo as well as my TFV8 and it wouldnt fire either, then when i changed it from Kanthal to xXx at the same settings, it ended up firing the cotton SUPER hot on the TFV8, think I burned the coil out
Ohhhhh, didn't realize you were changing atomizers. You have to reset the resistance between atomizer changesThe thing is i tried it on my Combo as well as my TFV8 and it wouldnt fire either, then when i changed it from Kanthal to xXx at the same settings, it ended up firing the cotton SUPER hot on the TFV8, think I burned the coil out
No, it won't. Kanthal mode and xXx mode are two completely different beasts. In kanthal mode generally your over 30%. In xXx mode start at around 3 or 3.5 and adjust up slowlyI reset the resistance when I did it, maybe 171 watts was just to high. I did adjust some settings this morning and got my perfect vape back but it was just weird. Like when I set the FSK to 5-6% it wont even fire on Kanthal mode. Only xXx mode.
Forgot to reset resistance? Check out the video I made for instructions
Sent from my SM-G935V using Tapatalk
With that said tho it dont hurt to start low and work up in kanthal mode either
It all depends on your build. If it's straight kanthal, then that mode will be fine. If it's a mix build then xXx is the way to go. It's ok to turn the fsk up as high as it needs to go to get it to workVideo helped alot
So would xXx mode be best? Kanthal wont fire anything below 50% for me
What build are you running? Single kanthal or what. Wire, wraps, ohmsVideo helped alot
So would xXx mode be best? Kanthal wont fire anything below 50% for me
I'm divorced so my advice may not be the best but I always said fuck her if she can't take a joke.Well I started to think about it and decided I could not take my black collector item into the woods with me
So this morning I ordered an Orange one to take out with me because it's easier to find, right Two in one week.... you think my wife will notice the Orange one is in fact not a black one
What build are you running? Single kanthal or what. Wire, wraps, ohms
And with that build it won't fire in auto tc but will in xxx? Do you get some vapor in auto?Single kanthl, 7 wraps, .35, 24g
And with that build it won't fire in auto tc but will in xxx? Do you get some vapor in auto?
That's fine. Set it where you like it. As long as it's where you want it and it's not scorching the cotton.Auto fires but I never used auto i only tested it because at first i thought it was a device issue, Kanthal wont if the fsk is below 50, xXx it will fire but really hot
Tell her you bought the black one a blaze orange hunting jacket. Lol.Well I started to think about it and decided I could not take my black collector item into the woods with me
So this morning I ordered an Orange one to take out with me because it's easier to find, right Two in one week.... you think my wife will notice the Orange one is in fact not a black one
Kenthal fsk and xxx fsk are 2 different things. Kenthal fsk I use around 70 where of I was using xxx mode for kenthal it would be around 4 or 5 iircAuto fires but I never used auto i only tested it because at first i thought it was a device issue, Kanthal wont if the fsk is below 50, xXx it will fire but really hot
Go to xxx, adjust your fsk to .5 and press fire, it won't fire but start there and go up .5 or 1 at a time. Once you start getting vapor go up .1 at a time until its perfect. You aren't going to be anywhere near 50 when your doneAuto fires but I never used auto i only tested it because at first i thought it was a device issue, Kanthal wont if the fsk is below 50, xXx it will fire but really hot
Kenthal fsk and xxx fsk are 2 different things. Kenthal fsk I use around 70 where of I was using xxx mode for kenthal it would be around 4 or 5 iirc
Sent from my SM-G935V using Tapatalk
Not your fault Deuce got to you...Just got my third one, a silver one. I need to stay off this thread, LOL!
The presets are big time improved with the last update. That said I have gotten so use to using the xXx mode I find myself still using it most of the time. I only use kanthal, SS316L 304, sometimes 430 and Nichrome. The SS presets are great but there is no adjusting FSK, that's why sometimes I revert back to xXx mode to have more control to tweak just right.Video helped alot
So would xXx mode be best? Kanthal wont fire anything below 50% for me
I can blame someone else? Sweet!Not your fault Deuce got to you...
Lol, yeah I get the blame for everything. It almost makes me feel like I'm married again. Lmfao. I said before and I'll say it again. Hate the game not the player. Lol.I can blame someone else? Sweet!
Just because he got the SILVER oneLol, yeah I get the blame for everything. It almost makes me feel like I'm married again. Lmfao. I said before and I'll say it again. Hate the game not the player. Lol.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Silver is the way! Too bad they they never made a gold one. Lol.Just because he got the SILVER one
Same here. I voted for them in every category that applied to them.That time of year again. Gonna show HT some love here because I truly believe it's one of the most under rated boards out there.
http://guidetovaping.com/2016/12/01/guidetovapings-best-of-2016/
Sent from my SAMSUNG-SM-G900A using Tapatalk
Any recommended settings for nichrome
Preset nichrome mode?Any recommended settings for nichrome
I didn't even realize there was a nichrome mode...lolPreset nichrome mode?
Sent from my SM-G935V using Tapatalk
What I'd like to know is anyone has actually used tungsten since the G2 has a setting for it as well.I didn't even realize there was a nichrome mode...lol