NO steer clear of that rip off company. avoid it like the toohtless one legged day hooker.
Friends don;t let friends vape dangerous.
Become a Patron!
New to it all... Need some help...
- Thread starter Bart
- Start date
Friends don;t let friends vape dangerous.
Nicer, accurate and cheaper, $14.71
And as for tanks, imo this kayfun is the best there is. Better than a Russian. I have both and other versions besides and this has the deepest juice channels and best air flow I've experienced from them all. It's made from a different manufacturer than the others. It's the only one I'll buy now. Oh, and it's $18.67 http://www.fasttech.com/products/3028/10006473/1559100
Wow those are WAAAAY cheaper! If a clone should be considered, I'll stop by my vape store on my way home today. I know he sells a lot of clones and whatnot. If he has one that's reasonable, I'll pick it up.
Thanks again everyone.
Thanks again everyone.
Do watch the manufacture on the kayfun try to stay on one of the 4 major clone companies like , tobecco, ehpro, hcigar, infinate. I have seen some ebay knock offs made from unknown pot metal and plating that reacts to juice.
the only way to learn bart is to buy. so clones are good, some are bad. i guess you just have to be prepared to spend until you know what's best. your local shop's clones could all be great or could all be duff. i buy certain products from certain vendors because i've learnt what good and guaranteed to work for me. so your're new? so you'll want everything now!! hmm, that's where it'll become expensive. after a while you'll learn to be patient. but go get what's available for immediate purchase in the meantime as you need to get on the go, you know.. but take note of the info and especially the links for your future purchases
@Hobby Kid -> That makes so much sense - great advice. To be honest, I'm to the point now where I just want something that I can take huge pulls off of and get a huge, cool hit.
I have a T3D, T3S, ASpire CE5 - the coils are dead in a week and I feel like they clog up... (I set my V=4 and P=8) Plus they only hold 2-3mL of juice, so I need to carry a bottle in my bag and refill twice a day. I like a huge, cool and flavored vape. Thick and heavy. These lil baby tanks are not what I want - that's all I know, lol. But here I am $50 later without a tank I really love. I'd rather just buy the real one and know that I have a quality product that everyone seems to rave about, you know?
I have a T3D, T3S, ASpire CE5 - the coils are dead in a week and I feel like they clog up... (I set my V=4 and P=8) Plus they only hold 2-3mL of juice, so I need to carry a bottle in my bag and refill twice a day. I like a huge, cool and flavored vape. Thick and heavy. These lil baby tanks are not what I want - that's all I know, lol. But here I am $50 later without a tank I really love. I'd rather just buy the real one and know that I have a quality product that everyone seems to rave about, you know?
I have heard more neg in regarding air flow issues, some leaking.
20-30 spent on a clone if it leaks you are out 20-30 bucks and cut your teeth on the trouble shooting.
there's a little unknown add-on for the kayfun which eliminates the need to unscrew the bottom fill hole
Todd's Review
He knows his stuff but his accent is so thick he needs sub titles.
Todd links to the cloud9vaping which I've linked here so you (or anyone) can see some of the other customisable items for the kayfun such as turning it into a viable dripper with a decent adjustable air flow. I've just decided to buy one. Google thows up a few US vendors selling it, for example http://www.vapinart.com/cart/K-GR-Kayfun-Ghost-Refill--P809.aspx
chickenmonkey
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I did get some good kayfun from them. Not all bad.
With the new bs shipping, them not fulfilling orders?
I hope they are not "plated" contacts on the build deck.
i just saw your reply. how long you been vaping? i'm guessing you can rebuild coils and wick else you wouldn't have mentioned buying the Russian. Kayfun style tanks are the way to go but they do get through juice. I have no problem carrying a spare bottle with me, and battery. i've tried the extra long extension tubes for the kfl but they're too big and cause leaking. Below.
if your concern is using too much juice then make your own.
A dripper is what you'll get huge pulls from.
A 26650 mod like the Seven and a large 26650 TOBH or Stillare rda might suit you or you can use a 22mm dripper. you can buy 26650 batteries 5200mah which last a day+
Been vaping for two weeks. I feel like I can rebuild a coil but have never done it. Im sure its a skill whixh is perfected with practice. I just bought a clone kayfun for 35$. I had him coil and wick it for me. Works BEAUTIFULLY! Love it, so thanks for saving me 55 bucks! 
Just gotta get some wicks and wire now... and one of the ipv2s!!! Holy shit.. the guy let me try his and WOW. BAD-ASS.
Just gotta get some wicks and wire now... and one of the ipv2s!!! Holy shit.. the guy let me try his and WOW. BAD-ASS.
Nice one mate. There are ready made prewicked coils you can buy. I've bought loads for new vapers. You can use them in drippers. They takes seconds to fit! I've bought mine from fasttech as they're so cheap but you can get them elsewhere if you do a bit of googling and ask around. Here's a link to a thread I was chatting about it, it's from about the 8th-ish comment down and onwards, with the links to fasttech. Of you want to know anymore ask here or maybe start a new thread:
Goodnight
http://vapingunderground.com/threads/hey-yall-from-the-eastern-shore-of-md.12896/#post-83982
@Bart check out this http://vapercoils.com/purchasing-and-using-pre-built-coils#more-788
and go to their home page as well. it's got tons of resources and info for coiling and other stuff
and go to their home page as well. it's got tons of resources and info for coiling and other stuff
Thanks @Hobby Kid !!!!
Another question -> According to a thread I read, my MVP has an Ohm reader built in. Can I use this to avoid having to buy a standalone device? Apparently you just hold down both buttons!? #thoughts?
Another question -> According to a thread I read, my MVP has an Ohm reader built in. Can I use this to avoid having to buy a standalone device? Apparently you just hold down both buttons!? #thoughts?
chickenmonkey
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I use both. To be certain .
VapingJunkie
Down with the Clown
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
You're fine just using the ohm reader on your MVP.
Sent from the Otter Box around my Galaxy S4.
Sent from the Otter Box around my Galaxy S4.
WOW already thinking of an IPV2 at 2wks of vaping ..... Slow down, take your time. This isn't a race/competition..
..... Slow down, take your time. This isn't a race/competition..
MVP is still a Worthy device.....
I use one in rotation, almost always w/ Russian 91% clone with coil 1.2 - 1.4 @ 10w Its a good vape !
IMHO once you get your building skills on your favorite topper, you can have a great vape without going 100w ...Lol !
Anyways.....
I use one in rotation, almost always w/ Russian 91% clone with coil 1.2 - 1.4 @ 10w Its a good vape !
IMHO once you get your building skills on your favorite topper, you can have a great vape without going 100w ...Lol !
Anyways.....
I wouldn't shell out a whole load of cash as a new vaper, not yet anywayz. It's a bit like when you first drive. You'll want a certain car, then you'll want a different car. You might get through a lot before you find the one you don't regret spending your money on.
Checking ohms on any mod is ok so long as you know 2 things:
1. It's accuracy
2. Whether it fluctuates.
It likely your mpv is authentic. Innokin is a good company. So don't worry.
Matthew Zarzecki
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I've had an MVP for about two months now and I'm upgrading the to ipv2 in a few weeks.
chickenmonkey
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I have an ipv2. I love it. I have found that if your tanks leaks at all it will seep into the battery compartment. I am probably going to seal mine using gasket stuff. Other than that and the tiny screws it's great. I change my battery vtc5 every 24 hrs. There are a whole slew of new vv/vw mods coming out. I would wait and research all the reviews and get your money's worth. Good luck.