Try using either a 3.0 or 3.5 mm ID coil in the Siren, that should have enough cotton in the juice/feed slots. When you think you have a bit too much cotton (whatever type wicking material) in there, you'll have it just right!
Become a Patron!
This requires a song.I'm snug as a bug in a rug, right now. I have felt better, but I certainly know that things can always be worse.
I'm warm, clothed, fed, have a roof over my head and am employed. Today is a good day.
I hope this new year brings you happy days, good health, and makes wonderful memories for you, even on the days that don't feel quite as fun.
I’ve only used 3mm ID coils for years now, and I’ve been wicking with Rayon for a long time as well, making sure it’s always a tight fit in the coil. Maybe I’ll dig the Siren V2 back out and try it again this weekend. Thanks for the tips though!
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I’m still using the kf4 and the kfl for Mtl.... of which I’m doing much lore of these days.
For dripper I’ve been all about the va cyclone
Sent from my iPhone using Tapatalk
Love the VA Cyclone on the Therion BF! Wish I could find a couple more!!
VA Cyclone is an awesome dripper! I still have the one shown in my avatar...Ares. Oh Ares. How I had promise for thee...
Rebuilt it for the first time today, and gurgle, gurgle, leak, weep, weep, gurgle. Can’t get the AFC ring off to get it cleaned out good, and decided to revert back to the trusty KF4 until I figure out what in the hell I did wrong.
My freedom smokes has the Therion BF 75C on sale for $89 https://www.myfreedomsmokes.com/hot...on-dna75c-bf-squonker-box-mod-black-body.html Give that Cyclone a run on the BF side of vaping!
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I run mine on the toaster or the halcyon.
I’ve come back to the mtl side almost full time. I haven’t really been vaping a whole lot lately in comparison anyway. But I’ve gone from 20ml of juice a day at 3mg to 5ml at 0mg.
I forgot how nice some of these juices tasted at 15-20w of power. I’ve also forgotten how to mount a 28g coil at 1ohm lol.
Sent from my iPhone using Tapatalk
I’ve come back to the mtl side almost full time. I haven’t really been vaping a whole lot lately in comparison anyway. But I’ve gone from 20ml of juice a day at 3mg to 5ml at 0mg.
I forgot how nice some of these juices tasted at 15-20w of power. I’ve also forgotten how to mount a 28g coil at 1ohm lol.
Sent from my iPhone using Tapatalk
Totally agree! I still tap dance on both side of the street, but some days MTL is the way to go. I usually have a Chalice 3 on one Therion and my one and only Cyclone v1 on a Wraith. The rest are Nuppin, Haku and B2k on Therion, GBox 200 and a SV.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I was running full wide open for a good while, goon and Kennedy at 120-150w or a 0.08 ohm load on a parallel box.
For whatever reason getting back to basics has been nice. Not to mention I'm kind of digging all the older 22mm stuff again too.
My rare dl gear lately has been the hadalay, tugboat, goon22, kf5 and serpent mini tank(not the smm) all with regular round 24g.
If this keeps up, I'll be liquidating again.
BAM crew
I'd say give Haku (SXK version) a try, I think you'll like it.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I may have to do that after I downsize the gear.
I’m on the process of picking 2 or 3 setups to keep and selling the rest.
I want to convert them into a new 4K drone.
Sent from my iPhone using Tapatalk
How does she vape??
I've gone down the rabbit hole with the sqonking stuff but I'm hoping to slow down after my recent acquisitions. All I want (though not really need) is a couple more Stumpy bf and a couple more un-drilled Cyclones v1.
This just in...My wife let slip she got me a Fuchai Squonk kit.
Whoooooo!
Whoooooo!
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Lol, I meant a 4K camera on a quad or hexacopter. I have a pair of them already. However, it’s time for an upgrade.
I’m slowing down the vape gas and picking up another expensive acquisition syndrome in its place.
Sent from my iPhone using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I knew that! Yes, drones are an expensive hobby, but I'll stick with custom squonk gear.....for now! A couple of my neighbors got the stink eye from cops during the recent brush fires, they decided to fly their drones in the "action" areas and created a hazard for the spotter planes and fire choppers.Lol, I meant a 4K camera on a quad or hexacopter. I have a pair of them already. However, it’s time for an upgrade.
I’m slowing down the vape gas and picking up another expensive acquisition syndrome in its place.
Sent from my iPhone using Tapatalk
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
No offense but those guys are less than smart.
I hate when I hear about some idiot using them to get in the way. Albeit, a little mischief is ok, but not when it hinders first responders or can cause damage.
I got kicked out of a park for flying and getting scenery around a waterfall. A police officer came up to me and told me to leave. I showed him my lic and registration, as well as the laws that were on my side. He told me I had to leave. So, I did. I went across the street to a coffee shop and flew into the park, saw his unit and landed on the hood of the car.
He was pretty animated and pissed, but I made my point and no one was hurt.
I don’t why but I never could get into the custom gear. I have a few of sonars mods, and a few nicer Mech mods. I guess the reality is, I’m bored with the vape gear. Nothing new has come along that struck my fancy since the dna200 or the sx350j. I have what I like and keeps me off the smokes.... and way more than that even.
Maybe I just need something to chase.
Sent from my iPhone using Tapatalk
You think your better half will be OK with that?
I called them "idiotic dumb shits" in the forum where they were complaining! Then, I pointed their thread to all my neighbors (we were affected by the Creek fire) and they surely let those idiots have it!
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I hope you guys made it through the fire ok.... I'm surprised no one shot the drones down. I surely would have taken mine and pushed theirs down
Pilots like that make me more than ok with faa regulations... To a degree at least. I think the ones now are excessive in a way that they hinder responsible pilots and pointlessly restrict certain areas. I do think they should not allow hobby pilots to fly within 500 yards of emergency personal or within 500 yards the flight path of any emergency vehicle or aircraft.
They were getting in the way hurricane relief this past year also.
The tool is great for being used to help rescue efforts when used properly but unfortunately that's not done the right way either yet.
She's ok with it, within reason.. lmao.
BAM crew
Too bad I gotta wait it seems it was going to be my big present for my b-day this year.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
It's definitely a pretty mod and well worth the wait!Too bad I gotta wait it seems it was going to be my big present for my b-day this year.
You're a lucky man.
BAM crew
Need help finding a MTL tank with factory non rebuildable coils for a friend that wants to try quitting stinkies.
I know there is a newer nautilus tank but not sure on how good it is. MTL is not my thing so I don't follow the products targeting the MTL crowd.
I know he will probably never get into rebuildables, doesn't like to futz with stuff. He needs something he can slap a new coil in and go when it's time for a change out.
Thanx in advance.
I know there is a newer nautilus tank but not sure on how good it is. MTL is not my thing so I don't follow the products targeting the MTL crowd.
I know he will probably never get into rebuildables, doesn't like to futz with stuff. He needs something he can slap a new coil in and go when it's time for a change out.
Thanx in advance.
Endura T20-S
$22 at VaporDNA
https://www.vapordna.com/Innokin-Endura-T20-S-Starter-Kit-p/endt20.htm
I have tried 1 and it is a really good MTL setup.If I weren't flat broke I'd get 1 for myself.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Psst...There's this girl named Amy!
Sorry I couldn't help it!
Lmao!!!!!!
Good one! I didn’t realize that movie was so well known
Sent from my iPhone using Tapatalk
Yeah, he's a pack a day smoker. I'll get him some 12 & 18 to see what works for him
Thanx for the cheap suggestion. Gives him an option to go with besides my $60 selection of components.
Joey Lauren Adams is smoking hot.I could watch her as she watched paint dry.
Vaping doesn't have to be expensive to be a good experience.Anybody who tells you different is either lying or misinformed...Cheers!
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
she was great in mall rats and on the edge
Yeah, his call on what he is spending. He had a set up a while ago but from what he said it was a pos. Leaky, sometimes fired and other issues I guess. He doesn't live near me so I have no idea what he had.
The ~$60 package was a smoke mico box and the zenith, shipping & tax nothing special but it adds up. Want to get a small built in battery mod, mtl vaping under 15w, 1500-2000 mah will go a long way.
That cheap deal would probably be far better than what he had so either should be a better experience.
Got a call from my friend and I'll be getting to try out another cheap little starter kit soon.
http://www.wismec.com/product/cb-60-2/
So far reviews on this seem pretty favorable so here's to hoping it gets the job done properly.
http://www.wismec.com/product/cb-60-2/
So far reviews on this seem pretty favorable so here's to hoping it gets the job done properly.
Fingers crossed you got a good one, my 1st seeped from the top fill, Innokin replaced it for me, and that what leaks from the base, but the one I ordered from fasttech is bone dry and working great.
Hope so. I should just be able to wick this and fill from the top with the air holes closed then open to adjust.... yes???
Sent from my SM-G935W8 using Tapatalk
I top fill mine and don't close the air holes on my good one.
I'm gonna wick and coil tomorrow morning and get it ready for Superbowl
Thinking about Blackwood Double Barrel .. yeah that's what I'm gonna fill it with.
Sent from my SM-G935W8 using Tapatalk
It is a fairly loose draw on it. I have it on the smallest hole. It is a decent vape.Thanks for the tip nailz! You rock. Just got the Ares all wicked up. I have a kick a$$ build in here. Working great no leaks no seepage
Sent from my SM-G935W8 using Tapatalk
Sent from my SM-G935W8 using Tapatalk
Thanks for the tip nailz! You rock. Just got the Ares all wicked up. I have a kick a$$ build in here. Working great no leaks no seepage
Sent from my SM-G935W8 using Tapatalk
Awesome, glad it is working well for you
Only con about this tank. I have had to tighten the screws. Using the Philips head right now. Will try the flathead on the next coil.Awesome, glad it is working well for you
Sent from my SM-G935W8 using Tapatalk
Ok I'm gonna ask here. Im wanting to try a good MTL tank and see if I can enjoy the flavor and get less clouds. I tried a kayfun 3.1 clone and it was close to working for me but not quite right, mainly because i could not adjust the airflow easily to find the right airflow for me. Ive looked at the siren and berserker and I care less how good they vape I can't stand the design of the atty. I hate all attys that when you open it up to get to the deck the glass is not held on at the bottom.Im using an ammit 22 and found the flavor is great if I go from a dul .7 coil setup to a single .7 coil but the cluds are about the same. I want to be inconspicuous in public.
So is there an MTL rta that has:
So is there an MTL rta that has:
- great flavor,
- easy to use airflow like on a griffin or ammit not like the kayfun 3.1
- has a standard easy to replace drip tip, not proprietary or attached to the top piece etc.
- top fill
- the glass section is held on at the top and bottom when you open it up to get to the deck
- easyish to build on and wick