Yo if this guy had found rip trippers he wouldn't have gotten dry knuckles.
Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
Yo if this guy had found rip trippers he wouldn't have gotten dry knuckles.
Specs brol I enjoy it much much more..
HAHAHAHA!
I'm very green though and not too familiar with the vaping personalities. Why do people hate/dislike riptrippers?
Sent from my VIE-L29 using Tapatalk
Probably because he's getting paid to post videos and vape, and he more than likely has been given 3 of every vape product that has come out in the last few years. I don't care for his videos but there's obviously way more people that do then dont.
3x26 SS x 36 SS Alien
First build with SS316L from kidney puncher...the colors doe
Sent from my iPhone using Tapatalk
Its because of his video that he took down "Side effects of vaping"
Someone with that many subscribers and seen as a staple in the vaping community posting a video claiming that vaping gives side effects like he had is a bad look on the community, especially when the FDA is looking for fuel for their fire..thats why alot of people since the video have bagged on him for dry knuckles and more.
I love "Tip Rippers" parody of the video though.....gives a good chuckle
Someone with that many subscribers and seen as a staple in the vaping community posting a video claiming that vaping gives side effects like he had is a bad look on the community, especially when the FDA is looking for fuel for their fire..thats why alot of people since the video have bagged on him for dry knuckles and more.
I love "Tip Rippers" parody of the video though.....gives a good chuckle
Ok so any build ideas you all can give me just with the material I have on hand? I'm getting bord lol I have no drill so I'm doing it all by hand I like dual coils unless the single puts out the clouds. All I have right now is 24g kanthal A1, 26g nichrome n80 and 26 G ss316l thanks much! Btw I'm a cloud chaser. Flavor is second . I use my tfv8 for flavor and my builds for clouds
Have you tried doing a parallel build with the 26n80 & 26g ss316 or maybe 26 & 24?
I normally tell people to try a 3 wire braid, just a simple 3 wire weave but don't tighten the weave up, leave it with the gaps for extra wick coverage, using your 26g is going to make it quite a low ohm build tho so maybe try a single first and see what it comes out to.
When i'm in a tight spot as i am now i just fuse up 2x 26n80 with 39g and wrap a dual 6wrap on a 3mm id, 0.17ohms and set her to about 80w
Last edited:
Finally photobucket works!
10ply 0.3mm Stalien
12 ply 0.3mm Stalien
I wanted more flat but I couldn't really tell how flat it was till I coiled it.
Thanks for all your support guys!
10ply 0.3mm Stalien
12 ply 0.3mm Stalien
I wanted more flat but I couldn't really tell how flat it was till I coiled it.
Thanks for all your support guys!
Ok so I have some coils installed in my mech mod single 18650 lghb6 running round 0.12-0.13 do I need to be worried? I'm kinda irritated cause I caint seem to get this thing to hit good and I made this build and miss calculated but it hits better than all my builds I put in it.. ugh yea it's my first mech.
I for one usually run a similar build in resistance on tubes but many advise against it, just make sure your battery isnt being pushed passed its CD Amp rate and you will be perfectly fine.
For Tube mods I highly suggest 3x28g/38g 316L Aliens 5 Wraps/3mm ID
This is one oif the only builds for a tube I actually enjoy, I like to parallel it with another strand of 28g 316L 6 wraps if its a 24mm RDA though..
Is that a dual coil?
I need to try some. Got lots of .5 maybe a .5 10ply..mFinally photobucket works!
10ply 0.3mm Stalien
12 ply 0.3mm Stalien
I wanted more flat but I couldn't really tell how flat it was till I coiled it.
Thanks for all your support guys!
Ask raymo. He may be able to get 0.4mm now. I'd start with that. 0.3 is 25% narrower than 0.4 so even that is a hige leap.
Finally photobucket works!
10ply 0.3mm Stalien
12 ply 0.3mm Stalien
I wanted more flat but I couldn't really tell how flat it was till I coiled it.
Thanks for all your support guys!
Any tips on working with 0.3 ribbon? I always have a tough time stacking it and keeping its stacked lol. I just may not have the patience for it I dunno.
Sent from my iPhone using Tapatalk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
I run a 50/50 mix of PG/VG on my ribbons to keep them together. Juice will work just as well. Some people will use saliva, but don't apply directly with your tongue - you could get a nasty cut, and also not all wire is clean.
I'll* try it...I won't be licking any wire any time soon I'm a carnivore anyways
Sent from my iPhone using Tapatalk
Yessir
This works for any and all Ribbon wire...
https://drive.google.com/open?id=0ByjxYyTSvEyBOFRwS1JZMG1kZVk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
I wanna try that. Is it a new course they're offering?
Yeah man it's called your failing this semester you'll never be an engineer 101. Offered exclusively at the school of zero fucks
Sent from my iPhone using Tapatalk
One of the most difficult builds you could ever attempt...Ive seen a few people make "wire shots" and macro shots of coils but theres only 2 people besides me that Ive seen make full coils...The Alien Staggerton....
I made a few variants last night but my Helicon trial expired and I cant afford it right now so I cant stack images for now....so here are some half decent shots of one of the builds.
The Other Variations:
I made a few variants last night but my Helicon trial expired and I cant afford it right now so I cant stack images for now....so here are some half decent shots of one of the builds.
The Other Variations:
Just be a Surveyor.Yeah man it's called your failing this semester you'll never be an engineer 101. Offered exclusively at the school of zero fucks
Sent from my iPhone using Tapatalk
The ribbon sliders work perfectly! Changed my life!
Looks great man
Thanks
Monster aliens for the Modfather crew
3x26x 36 SS316L 4mm 10 wrap. But I think my buddy will pull out 2 wraps to make it 8.
Sent from my iPhone using Tapatalk
Jaw to the floor...just wow.One of the most difficult builds you could ever attempt...Ive seen a few people make "wire shots" and macro shots of coils but theres only 2 people besides me that Ive seen make full coils...The Alien Staggerton....
I made a few variants last night but my Helicon trial expired and I cant afford it right now so I cant stack images for now....so here are some half decent shots of one of the builds.
The Other Variations:
@b_d_builders
Watch raymo2u's stacking method. Make sure you make that arc that he does. That's the key. After that look up build mode staggerton on YT.
It's a real pita. It takes so much more attention and effort to make a build with. But 0.4mm is easy as can be. 25% is a huge difference.
I've never tried the vg for stacking. But haven't had much of an issue
0.4 and 0.5 can easily be done without it but it makes it so much easier. Especially with 10 ply or more.
0.3 can be done dry too but I don't like it.
Coated in VG once you stack it it's done. It'll stay like that if you sit it down or w/e which is important for SSFCs if you float the ribbon.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Email them to me and I'll stack them for you.
Lol you wouldnt want 200+ images every few hours
Im using CombineZP right now...while its no helicon, it can stack....it doesnt fix flaws and minor blemishes like helicon though...
Thank you for the offer Chef!
Got the limited edition L shaped hohm wreckerLol you wouldnt want 200+ images every few hours
Im using CombineZP right now...while its no helicon, it can stack....it doesnt fix flaws and minor blemishes like helicon though...
Is anyone using an actual camera?
What is this "camera" thing you speek of? Can I hold one and my phone at the same time?
I will be shortly, will be using the Cannon EOS Rebel T6 as soon as I get the lens for it....
I don't think you can be short on this one, the lens it's not that small XD
Enviado desde mi SM-G930F mediante Tapatalk
Dude post the clouds you get from them bad boysOne of the most difficult builds you could ever attempt...Ive seen a few people make "wire shots" and macro shots of coils but theres only 2 people besides me that Ive seen make full coils...The Alien Staggerton....
I made a few variants last night but my Helicon trial expired and I cant afford it right now so I cant stack images for now....so here are some half decent shots of one of the builds.
The Other Variations: