I see tons of people with those. Where is the best place to get one?I love my Twisted messes RDA for the bigger coils. All kinds of room to build and great airflow.
Sent from my SM-G925V using Tapatalk
I see tons of people with those. Where is the best place to get one?I love my Twisted messes RDA for the bigger coils. All kinds of room to build and great airflow.
I use my 13 heavens for my big builds and love itI love my Twisted messes RDA for the bigger coils. All kinds of room to build and great airflow.
That is actually what I am looking at getting. 3mm holes will fit any builds.I use my 13 heavens for my big builds and love it
Sent from my SM-N910V using Tapatalk
Group buy on 13 heavens 9 hells!I need something like that, too. I just made a 3x24K/30N80 alien and it would just barely fit into my HellBoy. I wanted to stage it, but there was no way it would have fit.
I use a3/32 screw driver. I love my big attys. That's what happened with the first Clapton wire this morning I got a sleeper build in a vertex rda it was pretty close to perfect and the damn top cap didn't have a shot at fitting on I was just pumped I actually did itWhat ID did you use? That is why I need to get a big dog rda. Something that can handle the big coils. I guess my Velocity does but that thing is set. Plain kame build but great flavor. Just never want to mess that up. So all I have is the freakshow and it is tight cramming 3mm coils into. That is what I have in it now. Only a single though.
Sent from my SM-G925V using Tapatalk
What photo app are you using ? Are you using your phone or an actual camera?
Which phone are you using?I finally (kinda) figured out how to use my phone. Some pics come out great. Some don't - it's hit or miss.
It's $65 pretty much everywhere. www.Twistedmesses.com is probably the fastest. It's been my daily for about 5 or 6 months. I cannot say enough good things about itI see tons of people with those. Where is the best place to get one?
Sent from my SM-G925V using Tapatalk
I think I'm gonna grab up a heaven and hell. Slightly upgraded twisted messes from what they say. Should have my tfv4 tank soon so can wait to build and run that too.It's $65 pretty much everywhere. www.Twistedmesses.com is probably the fastest. It's been my daily for about 5 or 6 months. I cannot say enough good things about it
If it helps any I checked out both decks at my b&m and they're pretty much the same, its all about which one you like the looks of better.I think I'm gonna grab up a heaven and hell. Slightly upgraded twisted messes from what they say. Should have my tfv4 tank soon so can wait to build and run that too.
Sent from my SM-G925V using Tapatalk
Shit looks bad ass.Cross-posted on Facebook. A Clapton Tri-Force.View attachment 32472
+infinity simply because it includes tri-force in the name! What wattage are you running that thing at? What wire did you use to build that?Cross-posted on Facebook. A Clapton Tri-Force.View attachment 32472
I just tried a couple of stainless builds today (316L) and they are damn awesome. I've tried Kanthal, N80, Ni200, Ti01 and now 316L. I like the stainless the best so far (VW mode, not TC since I can't get them damn Xcube app to upgrade me). I tried a 26ga dual coil build in a Dark Horse Mini (reg mod @ 65W) and a 28ga dual parallel in a derringer (SMPL mech mod). Both are winning.That is what I'm talking about. I have zero clue when it comes to anything other than kanthal and nichrome. I want to use stainless but haven't really seen best place to buy and which stainless is vape specific.
You are giving me more drive to try it out now.
Sent from my SM-G925V using Tapatalk
Mirror... Just sayinSharp Aquos. I'd take a picture of it, but...
Looks awesome! I can't imagine doing that with nails. The last claptons I wrapped were with 38ga N80 and I almost lost my mind. Never again. Such a good vape though. Related, if anyone wants some 38ga N80 (hundreds of feet of it) PM me.
Not bad for my first real attempt at making Clapton wire 24g kanthal wrapped with 30g nichrome
Sent from the lab in my basement of vapement
Where are you getting your stainless from?I just tried a couple of stainless builds today (316L) and they are damn awesome. I've tried Kanthal, N80, Ni200, Ti01 and now 316L. I like the stainless the best so far (VW mode, not TC since I can't get them damn Xcube app to upgrade me). I tried a 26ga dual coil build in a Dark Horse Mini (reg mod @ 65W) and a 28ga dual parallel in a derringer (SMPL mech mod). Both are winning.
It's a smoother vape, more of a sizzle than the other Kanthal and N80 builds that are crackly. Getting great flavor and silly clouds even with 70VG mixes. Tomorrow, time permitting, I will tear out my beloved 24/38 N80 claptons and replace them with 26ga SS dual parallels. Next up will be an order for skinny SS to try all SS claptons. Who knows if that will be the best vape to date or a total failure. I'm willing to find out! FYI, bought my 316L wire on ebay. It wasn't as cheap as Kanthal from LightningVapes but it wasn't very expensive either.
One thing is for certain. Wrapping SS coils is hands down easier than any other wire I've tried so far. I recommend it 100%.
Not sure where that particular person is getting it from, but eBay is the best place I've found for it.Where are you getting your stainless from?
Sent from my SM-G925V using Tapatalk
The nails actually helped keep enough tension on it and helped guide it when I tried to do it without my nails and it kept doubling back on itselfLooks awesome! I can't imagine doing that with nails. The last claptons I wrapped were with 38ga N80 and I almost lost my mind. Never again. Such a good vape though. Related, if anyone wants some 38ga N80 (hundreds of feet of it) PM me.
Etsy is actually cheaper and it has 430 SS I do use eBay also for 316 SS and Ti actually they're about the same because etsy you have to pay for shipping but EBAY doesn't have 430Not sure where that particular person is getting it from, but eBay is the best place I've found for it.
Just be specific with 316L. I just got in another 100' of 24 ga. For $10
Sent from my Nexus 6 using Tapatalk
Awesome, thanks for the info man!Not sure where that particular person is getting it from, but eBay is the best place I've found for it.
Just be specific with 316L. I just got in another 100' of 24 ga. For $10
Sent from my Nexus 6 using Tapatalk
Try etsy too sometimes they are cheaper I use bothAwesome, thanks for the info man!
Sent from my SM-G925V using Tapatalk
430 is 99.5% nickel freeOk, will do. What is the difference with 430 and 316?
Sent from my SM-G925V using Tapatalk
Its just looks. They are functionally identical in every way. The TM has a bunch of fun AFC ring options that the heavens/hells lacks. Plus he makes all the extras available separately on his site as well if you ever need spare partsI think I'm gonna grab up a heaven and hell. Slightly upgraded twisted messes from what they say. Should have my tfv4 tank soon so can wait to build and run that too.
Sent from my SM-G925V using Tapatalk
Where are you getting your stainless from?
Sent from my SM-G925V using Tapatalk
FYI, bought my 316L wire on ebay. It wasn't as cheap as Kanthal from LightningVapes but it wasn't very expensive either.
I love all the colors they have and I like how you can buy them separately so I can slap a different color on and it looks like a whole other rda I wish more companies did that. I own pretty much every rda that has different color afc ringsIts just looks. They are functionally identical in every way. The TM has a bunch of fun AFC ring options that the heavens/hells lacks. Plus he makes all the extras available separately on his site as well if you ever need spare parts
I thought the heaven and hell has the interchangeable rings too. That may have been wishful thinking...I love all the colors they have and I like how you can buy them separately so I can slap a different color on and it looks like a whole other rda I wish more companies did that. I own pretty much every rda that has different color afc rings
Sent from the lab in my basement of vapement
It only has a few copper ,ss,blk that's allI thought the heaven and hell has the interchangeable rings too. That may have been wishful thinking...
Sent from my SM-G925V using Tapatalk
Sounds like if I do get one... I will be using the machine shop and powder coater at work to make my own!It only has a few copper ,ss,blk that's all
Sent from my SM-N910V using Tapatalk
They do and I own that but they only have 2 TM has about 20 options and now a black rda which they didn't have when I got itI thought the heaven and hell has the interchangeable rings too. That may have been wishful thinking...
Sent from my SM-G925V using Tapatalk