Become a Patron!

Post your builds

MidwestExpress

Silver Contributor
Member For 4 Years
I'm sorry I have a case of dyslexia apparently I thought you said the core was going to be 24g kanthal but I'd try instead of Clapton just twisting the SS because I did ask a few people and I'm just going by what they said stick to temp control wires but hey try it and let me know because I basically just asked about what you're trying to do with it.


Sent from the lab in my basement of vapement
Well, I ordered 100 ft of SS... So I have enough for a test coil! Haha

Sent from my SM-G925V using Tapatalk
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
That 80 degree thing is for any device that there is no choice for SS the xcube does have it so your all set I have the cube also which is fine but I have the IPv4s and there's only an option for Ni or Ti no SS so someone told me about that rule of thumb and It's pretty much dead on


Sent from the lab in my basement of vapement
 

MidwestExpress

Silver Contributor
Member For 4 Years
Are you sure because where I told you to order from has 2 200ft rolls for 13$ with shipping


Sent from the lab in my basement of vapement
Wow... hmmm. I didn't find that on etsy. Found 100 ft for 8 shipped. Boo on that order!

Sent from my SM-G925V using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
When you tired of it, let me know! I'll take. Hah

Sent from my SM-G925V using Tapatalk
The clones for Compvape seem to be the exact same quality, every other RDA Ive tried has melted, spun or broken center post on first buld and pulse...so far the TM, TM Mini and 13 Heavens RDA are the only ones that havent died on me from my retard strength lol
These were all bought for less then 20 each on ebay except the Doge x2, the Doge x2 was a $8 clone from Angelcigs and I got it yesterday and the first pulse on a build the center post insulator melted and the 510 pin isnt protruding anymore...its a innie now lol. The Doge X2 Barrel fits the TM Mini base if you flip it to lower the airflow holes and now its a great RDA...for 21 bucks altogether. You should try a TM clone and you wont regret it.

20151104_100606.jpg
20151104_100619.jpg
20151104_100520.jpg

Doge X2/TM Mini Base @ 180 watts....Vapor wasnt even warm in your mouth
http://api.viglink.com/api/click?fo...cnNOMkQtdTN6SmxYWXZ2QlpsS19n/view?usp=sharing
 

TF Vaping

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
7a4245f82df9a12e2294b0d6886c8452.jpg

9493dde5cf0865312c57039179e29cb9.jpg


Dual micro fused Clapton's
26 ss cores/32 ni80

Sent from my Nexus 6 using Tapatalk
 

TF Vaping

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
What diameter?

Sent from my SM-G925V using Tapatalk
Metals equivalent to a toothpick(tad smaller). Specifics I have no idea, I just found a piece of aluminium at work that I bent a handle shape into and use it for smaller stuff.

Sent from my Nexus 6 using Tapatalk
 

MidwestExpress

Silver Contributor
Member For 4 Years
Metals equivalent to a toothpick(tad smaller). Specifics I have no idea, I just found a piece of aluminium at work that I bent a handle shape into and use it for smaller stuff.

Sent from my Nexus 6 using Tapatalk
How do you wick that thing to keep from getting dry hits with a coil that long and so little wicking material?

Sent from my SM-G925V using Tapatalk
 

TF Vaping

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
How do you wick that thing to keep from getting dry hits with a coil that long and so little wicking material?

Sent from my SM-G925V using Tapatalk
It actually isn't that bad, that was one of my worries.
It is packed with cotton clouds in the bottom well and the absolute limit in the coil.
6 draws before it starts to taste like its drying out.

Sent from my Nexus 6 using Tapatalk
 

MidwestExpress

Silver Contributor
Member For 4 Years
It actually isn't that bad, that was one of my worries.
It is packed with cotton clouds in the bottom well and the absolute limit in the coil.
6 draws before it starts to taste like its drying out.

Sent from my Nexus 6 using Tapatalk
That is better than I thought you would get. That is awesome man!

Sent from my SM-G925V using Tapatalk
 

307_vapeist

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Twisted 24g with .06 flat ribbon wire wrapped around it. Oms to .16
 

Attachments

  • 12139890_1717337285164435_29782189_n.jpg
    12139890_1717337285164435_29782189_n.jpg
    50.8 KB · Views: 34

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
So after finding out if have to wait to get my hands on an aromamizer I got the Bellus from Youde and I'm loving it after several failed attempts and some massive juice leakage due to me not wicking it properly so after watching a video I got this thing down and for 30$ I'll buy another. So here are some specs on my build I used 26g 316L SS 8 wraps each coming in at .24 ohms running it in Ti mode in the IPv4s at 340 degrees the flavor is insane so is vapor production
5a3b8dc69e6373136e0ad5607089a0e6.jpg
7ee6a1f05ed304da228facd32c22c8ef.jpg



Sent from the lab in my basement of vapement
 

MidwestExpress

Silver Contributor
Member For 4 Years
So after finding out if have to wait to get my hands on an aromamizer I got the Bellus from Youde and I'm loving it after several failed attempts and some massive juice leakage due to me not wicking it properly so after watching a video I got this thing down and for 30$ I'll buy another. So here are some specs on my build I used 26g 316L SS 8 wraps each coming in at .24 ohms running it in Ti mode in the IPv4s at 340 degrees the flavor is insane so is vapor production
5a3b8dc69e6373136e0ad5607089a0e6.jpg
7ee6a1f05ed304da228facd32c22c8ef.jpg



Sent from the lab in my basement of vapement
What was the wicking issues you ran into? How did you solve it? I had the same deal with the kanger subtank when I first got it. Hated the thing because it leaked so much. Then watched some videos and do have the leakage unless I'm not breathing on it correctly for the airflow setting. Changed to the "Scottish Roll" for all my wicking now. Take too short a hit with the air wide open and this thing will leak! Gearbest just shipped my tfv4... so sometime in the next week or so I will have that to toot on finally!

Just did this build. 26 gauge nichrome core with 32 gauge wrapped clapton.

7b329f6db58cbd1174ae9c0c558b4dc9.jpg
a74c9cbfba86f9b3b1ebd8827a1fc0f8.jpg
be75af2bbf59151cd15f336305e7110b.jpg


Sent from my SM-G925V using Tapatalk
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
What was the wicking issues you ran into? How did you solve it? I had the same deal with the kanger subtank when I first got it. Hated the thing because it leaked so much. Then watched some videos and do have the leakage unless I'm not breathing on it correctly for the airflow setting. Changed to the "Scottish Roll" for all my wicking now. Take too short a hit with the air wide open and this thing will leak! Gearbest just shipped my tfv4... so sometime in the next week or so I will have that to toot on finally!

Just did this build. 26 gauge nichrome core with 32 gauge wrapped clapton.

7b329f6db58cbd1174ae9c0c558b4dc9.jpg
a74c9cbfba86f9b3b1ebd8827a1fc0f8.jpg
be75af2bbf59151cd15f336305e7110b.jpg


Sent from my SM-G925V using Tapatalk
Speaking of leaking 4smok tfv4's 2 leaked like I just dumped ejuice on myself but on the Bellus there are 4channels you put each end of a wick in one super easy fix its not really a fix I just didn't know and all I have to say Is if the aromamizer is better than the bellus mine better hurry up and get here I've been waiting for weeks


Sent from the lab in my basement of vapement
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
I love my kanger subtanks I gave 3 away but I'm still holding onto one


Sent from the lab in my basement of vapement
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
Didn't get much or any building time in today it was more of a juice making day.


Sent from the lab in my basement of vapement
 

Vapingbeauty

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I love my kanger subtanks I gave 3 away but I'm still holding onto one


Sent from the lab in my basement of vapement
Me to love mine I gave two mini's away but kept the plus

Sent from my SM-N910V using Tapatalk
 

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
2e73db7c59bd74a64dd9b0e07fafb9cf.jpg
w
9333a552c3a1f8855b33fc66cacdbff5.jpg

This is the inside of the Bellus


Sent from the lab in my basement of vapement
 

iLiptiKal

Bronze Contributor
Member For 4 Years
I was recently given a Bellus from a UD rep I know to run it through its paces and give my opinion. So far I have to agree with @Dawn0810; this tank is great. Build deck is small but still allows a decent sized wire, wicking is great, airflow is damn near perfect, flavour and clouds are the best I've had from any tank I've used.
I also really like being able to remove the build deck easily for re-wicking, and that the coils always line up with the airflow channel.
Overall I really don't have any complaints with it. With the price point as low as it is I can see UD selling a ton of them.

Here is a 28/40g fused Clapton that's in mine right now. Came to 0.32 ohms, been running it at 74W or 5V.
0f3eeca621b90bed15a381cf416b9b1b.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

Dawn0810

Gold Contributor
Member For 4 Years
Member For 3 Years
I will definitely be purchasing more of them I can't say enough good things about them I found them for 23 or 25$ at half the price of aromamizer I think youde really stepped up its game in this product.


Sent from the lab in my basement of vapement
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
5ft Wire Lengths of Today ;)

Top to Bottom Wires are:
2 x 24g Twisted Then Claptoned with 34g and Helixed with 32g
2 x 24g/28g/32g Staggered Clapton
2 x 26g/32g Slightly Flattened Fused Clapton
2 x 24g/34g Fused Clapton
2 x 24g/Flattened 24g Clapton Then Flattened Afterwards
2 x 24g Twisted, Helixed with 32g and Flattened
20151106_130233.jpg 20151106_130243.jpg 20151106_125719.jpg
Boneyard Coil (My Version) and Slightly Flattened Fused Clapton:
20151106_130438.jpg
 
Last edited:

MidwestExpress

Silver Contributor
Member For 4 Years
Just ordered a crown and rba base and gonna get ride of my subtank mini. Waiting to see how building on that is. Liking the look of the bellus though... Wishing I saw that before pickin up a crown.

Sent from my SM-G925V using Tapatalk
 

MidwestExpress

Silver Contributor
Member For 4 Years
Everyone was talking crap about me buying it but the joke is on them I have one kickass rta for under 30$ lol


Sent from the lab in my basement of vapement
Just did a quick search and found them on a sale for $18.50... might buy one! Bah!

Sent from my SM-G925V using Tapatalk
 

Saddletramp1200

Diamond Contributor
Member For 4 Years
I am still putting 215.00 in the bank every month I spent for Stinkys. If I want a Mod I just get it. Stinkys turn into ashes, Mods don't. Same Money spent. :cool:
 

Rommel

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Can you post less offtopic and more builds? That would be great.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I
I am still putting 215.00 in the bank every month I spent for Stinkys. If I want a Mod I just get it. Stinkys turn into ashes, Mods don't. Same Money spent. :cool:
If I was putting what I was in for stinkies Id be saving money :p I see shiny and I buy ;)
 

VU Sponsors

Top