A drill and a good fishing swivel is all ya really need...and practice...
That's true, I should of bought some tools that I needed instead of recently buying the Augvape Drugga squonnk, but I did, even against the reviews. But I still have my spectrum and my Voopoo Drag that I love
Yeah I need to get my drill, I bought the Augvape Drugga Squonk kit, and other than the RDA it's not worth it. Wish I would of bought the drillA drill and a good fishing swivel is all ya really need...and practice...
Sent from my SM-G965U using Tapatalk
Just looked it up - damn, page 24
Good job manStagger practice. The staggered 24g in the middle didn’t quite grab the fuse like I thought it would. I wanted to add on more set of frames and fuse again but I could tell It wasn’t gonna work out this time. This 36g seems huge after using 40g!
Fralien for my Revolver RTA. 2x26 frames, 9x.5 cores, 36 wrap (decore was 20g for the extra swooshy swooshy) .10 ohms.
Sent from my SM-G965U using Tapatalk
looks great!
Thank you!Yesss awesome. That’s how I like my alien wraps, swooshy. I need some lower wire, 24g is the lowest I have at the moment.
I liked the box and I cant stand the RDA....they sent me the Druga RDA and I opened it up on livestream, I had about 4 different sets of coils to try in it and I couldnt get a single set to fit in the druga or not had the coils slide back out of the posts when manipulating their placment.
Thanks I will try that, I do agree getting a build in that rda is a bit hard and just weird, and the hit is restricted compared to other rda's. I have a few bf rda I can try, I will adjust the bar and I was thinking of maybe buying a silver lock washer to see if it stops that nut from spinning too. Thanks for the adviceI liked the box and I cant stand the RDA....they sent me the Druga RDA and I opened it up on livestream, I had about 4 different sets of coils to try in it and I couldnt get a single set to fit in the druga or not had the coils slide back out of the posts when manipulating their placment.
When I got the Squonk Combo I tossed the RDA into the trash Immediatly, the box isnt awesome as is but with some slight adjustments it is a great single cell squonker.
Bend the Firing Bar/Contact so it doesnt push on the bottle and is easier to fire, make sure the tab lays flat against the nut. MAke sure the 510 is tightly together and clean. Swap out bottle for a YFTK or Coilmaster Super Soft bottle from 3fvape. Then the box is a great pocket squonk that hits like a dream (hits harder than most other single cell boxes Ive tried). Paired with a Reload BF RDA or my Franken RDA* its a great, hard hitting, long lasting combo.
Franken RDA is a Skywalker/TM24/Conspiracy Decks topped with a Gorge RDA Topcap.
Perfect in EVERY Aspect
Low Profile Slammed Cap/Reduced Chamber (Goon LP Size)
Flavor becomes Intense/More Efficient
Slightly Restricted Airflow (4mm x 3mm)
All Ultem (No Heat) Or SS
Handles Almost Any Build
Easy to Build and Wick
Decent Juice Well
Squonk Friendly
The reason I loved this RDA is the only space besides coil and wicking in the chamber is where air travels around the coils, but you can feel a slight restriction like the Reload RDA....its basically a stubby RDA with all the same vape characteristics of a Reload v1.5/BF RDA and IMO thats thebest all around vape. With the Skywalker RDA or if you buy the TM24 deck by itself and also buy the Gorge RDA its less than $35 together, and you get 2 Topcaps and a single coil deck if you want to use it.
I liked the box and I cant stand the RDA....they sent me the Druga RDA and I opened it up on livestream, I had about 4 different sets of coils to try in it and I couldnt get a single set to fit in the druga or not had the coils slide back out of the posts when manipulating their placment.
When I got the Squonk Combo I tossed the RDA into the trash Immediatly, the box isnt awesome as is but with some slight adjustments it is a great single cell squonker.
Bend the Firing Bar/Contact so it doesnt push on the bottle and is easier to fire, make sure the tab lays flat against the nut. MAke sure the 510 is tightly together and clean. Swap out bottle for a YFTK or Coilmaster Super Soft bottle from 3fvape. Then the box is a great pocket squonk that hits like a dream (hits harder than most other single cell boxes Ive tried). Paired with a Reload BF RDA or my Franken RDA* its a great, hard hitting, long lasting combo.
Franken RDA is a Skywalker/TM24/Conspiracy Decks topped with a Gorge RDA Topcap.
Perfect in EVERY Aspect
Low Profile Slammed Cap/Reduced Chamber (Goon LP Size)
Flavor becomes Intense/More Efficient
Slightly Restricted Airflow (4mm x 3mm)
All Ultem (No Heat) Or SS
Handles Almost Any Build
Easy to Build and Wick
Decent Juice Well
Squonk Friendly
The reason I loved this RDA is the only space besides coil and wicking in the chamber is where air travels around the coils, but you can feel a slight restriction like the Reload RDA....its basically a stubby RDA with all the same vape characteristics of a Reload v1.5/BF RDA and IMO thats thebest all around vape. With the Skywalker RDA or if you buy the TM24 deck by itself and also buy the Gorge RDA its less than $35 together, and you get 2 Topcaps and a single coil deck if you want to use it.
I was a part of the design (small part) the Logo was actually a scan of the word drawn out in English for ADVKen, its a decent single coil RDA but I like putting mall dual coils side by side in it.
I dont have the wasp to compare, but its close to 2 holes open on the goon
Massive SSFC Variant in the Rose Gold Goon 1.5 RDA
4ply .3R SS Core, 2ply and 3ply .3R/46g KD Staples, .3 N80 Square, 28g Frames. Staggered with 40g and Fused with 42g N80.
Augvape Intake RTA
6ply .3R Ka1 Core, Framed with 4ply .3R SS + 28g SS, Staggered and Fused with 40g N90
Hermetic RDA by BlitzEnterprises
5 x 30g Ka1 Cores, Wrapped in 42g N80
Thanks King! I felt like the last one I did was a big step forward. It actually looked okay and vaped okay. Maybe I have it in me to tighten it up some. Gotta try a ribbon wire variation for a little extra flavor.Getting really damn close now mate ..fantastic to see you improving on these
I liked the box and I cant stand the RDA....they sent me the Druga RDA and I opened it up on livestream, I had about 4 different sets of coils to try in it and I couldnt get a single set to fit in the druga or not had the coils slide back out of the posts when manipulating their placment.
When I got the Squonk Combo I tossed the RDA into the trash Immediatly, the box isnt awesome as is but with some slight adjustments it is a great single cell squonker.
Bend the Firing Bar/Contact so it doesnt push on the bottle and is easier to fire, make sure the tab lays flat against the nut. MAke sure the 510 is tightly together and clean. Swap out bottle for a YFTK or Coilmaster Super Soft bottle from 3fvape. Then the box is a great pocket squonk that hits like a dream (hits harder than most other single cell boxes Ive tried). Paired with a Reload BF RDA or my Franken RDA* its a great, hard hitting, long lasting combo.
Franken RDA is a Skywalker/TM24/Conspiracy Decks topped with a Gorge RDA Topcap.
Perfect in EVERY Aspect
Low Profile Slammed Cap/Reduced Chamber (Goon LP Size)
Flavor becomes Intense/More Efficient
Slightly Restricted Airflow (4mm x 3mm)
All Ultem (No Heat) Or SS
Handles Almost Any Build
Easy to Build and Wick
Decent Juice Well
Squonk Friendly
The reason I loved this RDA is the only space besides coil and wicking in the chamber is where air travels around the coils, but you can feel a slight restriction like the Reload RDA....its basically a stubby RDA with all the same vape characteristics of a Reload v1.5/BF RDA and IMO thats thebest all around vape. With the Skywalker RDA or if you buy the TM24 deck by itself and also buy the Gorge RDA its less than $35 together, and you get 2 Topcaps and a single coil deck if you want to use it.
We love you too KingPin!just spent past 40 minutes catching up with the build section and reading all the posts from the past few weeks (was away) ....everyone probably just got a shit ton of likes from me haha but definately all worthy cracking work everyone...I feel the build section Zen again now ...love you guys
The Gorge Cap only fits the Skill Clone as far as I can remember.
Is there a reason you use .5 ribbon more than any other? I find .4 easier than 3 but have to watch the build for lower ohms. I love the way aFralien in the Pharaoh Mini. 2x24 frames, 7x.5 cores, 36 wrap.
Sent from my SM-G965U using Tapatalk
.5 ribbon provides 25% more surface area than .4. Plus I just like the vape quality better than .4
I only use .3 when requested or when I need a tiny Fralien or Staple.
Fuck yea. That's like a whole day of work for me. Lol great job
Alien Staggerton
5ply .3R SS/28g N70 Core, Framed with 28g N70, Staggered and Fused with 36g SS
Its one of the few things that feels challenging to me but fun to make at the same time. Its almost like gambling when making them.
Sweet. In the time you did that I made a messed up staggered fused clapton. Lol I need some work. I think if I had a dedicated station things would be a lot easier on meFor Wtmke; Fralien, 2x28 frames, 11x.3 cores, 36 wrap.
Sent from my SM-G965U using Tapatalk
Ech! I don't do Staggers...but I installed that coil in the Pharaoh Mini for ya!
