Yeah, that's what I also found. That stapled helix coil in my 2nd pic uses 32g Ni80 twisted for the frames, 8ply .3×.1 Ni80 ribbon, and 40g Ni80 for the wrap wire, whereas that wonky staple coil in my 1st pic uses 8ply .4×.1 Ni80 ribbon and 40g Ni80.
Might have my witch snap a few pics later. I'm no good using a phone camera. I can do it but well my pics on it look crappy. 
Sounds cool! Maybe like a groove fuse or stagger fuse. When you get a chance you should post pics so we can see!Apologies for no pics atm, but did something I thought was a little neat this morn. Made up some 28 awg single strand Clapton wound with 32 awg both wire material was NiChrome 80. Then, I got a bit silly. Put two of these bits of line together and wrapped them fused together with 32 awg again. It looks eh, okay and I got a nice 0.35 Ω coil wrapping 3.5 mm ID.
Just a minor note. I use vice grip pliers, a swivel that i hook into a desk drawer. Been having my wire snap using just the pliers to crimp and hold to twist it. Plastic coated paper clips help. I can "tie off" the wire to them and crimp the paper clip instead of the wire, which helps avoid getting near half done then, losing tension because the wire snaps.
Excuse me for interrupting the coil porn.
That will be amazing!! I absolutely adore multi-gauge wraps. Do Iiiiiiit!!
Sounds cool! Maybe like a groove fuse or stagger fuse. When you get a chance you should post pics so we can see!
Yep, we totally feel empathy for a spouse who has just pulled a crap day and then go all Donald Trump anyway. *chuckles* Not, at least not the Trump bit. if i forget capitalizing i's forgive my decade in a N*x type of computing, hackers are lazy if the truth is told. ooops, did i type that out loud?
& am to go foolin round with firewood today after 9 AM, splitting with a hydraulic press I think. Then, who knows what else her dad will put me to doing.
That’s a really Nice staple helix!
View attachment 121801 View attachment 121800
Just sending out Some more high gauge framed staples. Haven’t had time to do anything fancy.
No such thing as too many pics..... Bring on the onslaughtLet me know if I'm posting to many pics
Half pitchfork
.3 KA1, 28/40 Ni80, 3mm ID, .14 ohm dual coil in the KTX. And these puppies are some juice hogs
View attachment 121833 View attachment 121834 View attachment 121835 View attachment 121836
awesome coils dude
Let me know if I'm posting to many pics
Half pitchfork
.3 KA1, 28/40 Ni80, 3mm ID, .14 ohm dual coil in the KTX. And these puppies are some juice hogs
View attachment 121833 View attachment 121834 View attachment 121835 View attachment 121836
No such thing as too many pics..... Bring on the onslaught
Sent from my MI MAX 2 using Tapatalk
Well ok then lol.
THE GODS DEMAND THEIR TRIBUTES! BRING ON THE ONSLAUGHT!
A little ribbon fun
2 ply .3 twisted (till it broke), .3 corrugated, .3 parabolic (should have done .5 for better symmetry
View attachment 121681 View attachment 121679 View attachment 121680
And how every journey begins with one step, i'm still giving mine
View attachment 121720 View attachment 121721
A friend saw my alien in recurve and asked me for one to his own. I managed to make
Wish i was able to do the no stretch method... But i need lots of practice before. But i'll get there
Grabbed that 50g spool today.. can't get details with phone anymore
Lähetetty minun Nexus 6P laitteesta Tapatalkilla
Paired with the voo poo drag ! Loving this setupHavent been on in awhile but I bought the new drop dead rda today and put a build in it with a couple 5 core aliens and it's just amazing ! I love the deck the flavor and makes no noise at full open on the airflow ! I am in love with this baby and plan on setting it up on squonk mode shortly. Cant beat that juice capacity ! I was so stoked on trying it out I forgot to take pics before I had already vaped on it . Lol
And was looking at the usuals ( u no who u are ) work and everyone has really stepped it up even from the last time I posted! Keep up the good work and keep vaping ! Cheers !
Sent from my SM-G955W using Tapatalk
Jesus ! That's amazingGrabbed that 50g spool today.. can't get details with phone anymore
Lähetetty minun Nexus 6P laitteesta Tapatalkilla
Paired with the voo poo drag ! Loving this setup
Sent from my SM-G955W using Tapatalk
these are the highest gauges I've used for this type of build too so off to a good start. 3*29g ni80/38g/38g ss316l. Ohms at .19 ID 3.5.
Stunning job meg you get it perfect next time 
I tried to alien 0.2 ribbon with 52g, I was somewhat successful
Edit: i will try 50g alien tommorrow to
View attachment 121977 View attachment 121978 View attachment 121979
WOW!!!
OH you don't get to play martyr when you just did a 52g alien. I tried with 46 the other day. It was retched lmao. Honestly though with your wire xp razorbacks should be something you shouldn't have to put to much time into to nail down. Grab a couple of legos to run the ribbon between and your off to the races. Once you feel how it works it's just a matter of a steady hand, which I don't have. So, if I can do it you can!!That's awesome ..but damn you, I was just feeling fine when you go and show razorbacking, something I Still have yet to do!!!
Oh yah ... i couldn't imagine doing it any other way. Here's my razorback setup. A lot of people use plastic baggies to hold their spools when they can't. But My desk drawer works amazingly well
Love that build stationOh yah ... i couldn't imagine doing it any other way. Here's my razorback setup. A lot of people use plastic baggies to hold their spools when they can't. But My desk drawer works amazingly well
View attachment 121985
Oh yah ... i couldn't imagine doing it any other way. Here's my razorback setup. A lot of people use plastic baggies to hold their spools when they can't. But My desk drawer works amazingly well
View attachment 121985
Thank you! Cost me a pretty penny. Had to pull back on some other stuff out of the budget for it.
Yah I've been meaning to do another, less intricate, binary since my enigma didn't pan out.That big blue corrugator reminds me that I got mine in last week, so I have to try a binary...!!!
