So little discussion of Yihi SxMini M class and other boards like SX350???

[f1r3b1rd]

you and me both I have 2 of the those aftermarket loose as a goose ones. my stealth black sx-m arrived today it's not leaving the house lol.

Roger that dude! My black/black is in its box most of the time the black silver has the loose case.
That thing is so loose its like a 80year old impotent guy wearing a magnum condom

 

[Maverik_X]

Roger that dude! My black/black is in its box most of the time the black silver has the loose case.
That thing is so loose its like a 80year old impotent guy wearing a magnum condom

the ipv mini 2 sleeves fit tighter on them kinda a pain the arse to remove them though.

This looks nice and compact, with dual and single coil option and a ton of air flow..and the price is not too shabby either! Only downside is how you fill it, but for a small grab and go tank it looks interesting:

http://www.eciggity.com/goblin-mini-rta-by-youde/

ordered and the morph tank aswell we'll see how they vape.

 

[f1r3b1rd]

I probably should have done that instead of the raincoat, oh well. Live and learn

 

[Maverik_X]

I probably should have done that instead of the raincoat, oh well. Live and learn

sorry couldn't resist. lol

 

[f1r3b1rd]

LMAO!!!!!! I prefer the depends hip huggers'
hahaha!!! The Gstring of protective undergarmets.

 

[Maverik_X]

LMAO!!!!!! I prefer the depends hip huggers'
hahaha!!! The Gstring of protective undergarmets.

almost forgot to mention that mod came with v2.2 preinstalled. Gonna upgrade it tonight so I can use the 75j in ni200 mode using the Wooglin workaround.

 

[Private192]

seems like vapor flask is going with the practical chip. no one really wants the ease and convenience of charging a lipo battery; not to mention the effortless GTA codes you need to access evolv devices... ill stick with old pratical thank you very much..

totally off topic but I find that using boiling water and a soft brush will clean your tempered Ni200 coils quite well.

 

[Maverik_X]

Yihi is making a limited run of the all silver Sx mini like I found a few weeks back. I wanna get one is it possible to buy one directly from them?
https://www.facebook.com/Yihisxmini/posts/841506059271964

 

[f1r3b1rd]

Is that painted or media blasted metal?

 

[Maverik_X]

no clue m8 I emailed them for details doubt I'll get a response till monday.

 

[f1r3b1rd]

If that's media blasted I may have a black silver for sale

 

[Maverik_X]

If that's media blasted I may have a black silver for sale

so is the black on black media blasted? is that why it seems differen't from my black/silver?

 

[f1r3b1rd]

Honestly not sure, I think is blasted then a cerekote. The finish is a very similar texture to my crekoted vsdna40 but I couldn't say for sure.

 

[Maverik_X]

Honestly not sure, I think is blasted then a cerekote. The finish is a very similar texture to my crekoted vsdna40 but I couldn't say for sure.

I'll be sure to ask when they get back to me. let you know what they say.

 

[f1r3b1rd]

Cool! Would love to know!!!

 

[f1r3b1rd]

You saw this on that FB page?

 

[dre]

Weird - I have some 24 gauge from Unkamen (they were out of 26), and the taste is disgusting. Yes, I cleaned it first with alcohol and then with soap and water. This doesn't make sense, because I have a Ti coil in an Ego Mega tank, and I get no taste from it. I'll try giving it a soak in the UC, but I can't figure out why this tastes so funky (spaced coil, never pulsed).

It's the oils and dead skin cells getting on the wire from handling it while coiling. After your wrap it and set the resistance. Bump the temp up to max and just fire and watch all the impurities burn away. Then wick and vape.

Sent from my XT1030 using Tapatalk

 

[tchavei]

It's the oils and dead skin cells getting on the wire from handling it while coiling. After your wrap it and set the resistance. Bump the temp up to max and just fire and watch all the impurities burn away. Then wick and vape.

Sent from my XT1030 using Tapatalk

You don't want to do that with a Ti coil.

Remember titanium dioxide? You don't want that on your wire. Rather use gloves if you have to. We never pulse Ti beyond gold or blue.

Regards
Tony

Sent from my keyboard through my phone or something like that.

 

[dre]

You don't want to do that with a Ti coil.

Remember titanium dioxide? You don't want that on your wire. Rather use gloves if you have to. We never pulse Ti beyond gold or blue.

Regards
Tony

Sent from my keyboard through my phone or something like that.

When temp is on it wont even change color when doing spaced coils

Sent from my XT1030 using Tapatalk

 

[tchavei]

When temp is on it wont even change color when doing spaced coils

Sent from my XT1030 using Tapatalk

Lol. You're right. I miss read 'bump the temperature' with 'bump the wattage'

Need my morning coffee

Regards
Tony

Sent from my keyboard through my phone or something like that.

 

[Mazam]

It's the oils and dead skin cells getting on the wire from handling it while coiling. After your wrap it and set the resistance. Bump the temp up to max and just fire and watch all the impurities burn away. Then wick and vape.

Sent from my XT1030 using Tapatalk

So i'm just setting my SX Mini to 600 degrees and doing a "dry burn" so to speak? Or pulses?

 

[dre]

So i'm just setting my SX Mini to 600 degrees and doing a "dry burn" so to speak? Or pulses?

Just fire it till it stops smoking.

Sent from my XT1030 using Tapatalk

 

[Mazam]

Just fire it till it stops smoking.

Sent from my XT1030 using Tapatalk

So yeah, initial impression is this worked for me.

Not sure if i still do not prefer the taste of Kanthal, but this certainly seemed to strip the bad taste off Ti that i was getting before.

 

[thunderdan]

no clue m8 I emailed them for details doubt I'll get a response till monday.

Varitube put the LE silver / silver up today: http://www.varitube.com/SXmini-Box-Mod--M-Class-Temperature-Limited_p_184.html

They also put the official yihi SX sleeve up today.

 

[Mazam]

I'll be waiting for a sleeve review on that "perfectly fitting" claim.

 

[thunderdan]

I'll be waiting for a sleeve review on that "perfectly fitting" claim.

I can report back when I get mine in.

 

[Maverik_X]

ordered one of ea from vapinart they shipped it out this afternoon hopefully I'll see it by saturday.

 

[thunderdan]

ordered one of ea from vapinart they shipped it out this afternoon hopefully I'll see it by saturday.

Nice. According to USPS mine should be here Friday.

 

[vapereloaded]

does anybody know how many limited editions does the m class have? I also saw on the yihi site that new batches have the serial number engraved on the lower frame.

Sent from my SM-N910T using Tapatalk

 

[thunderdan]

does anybody know how many limited editions does the m class have? I also saw on the yihi site that new batches have the serial number engraved on the lower frame.

Sent from my SM-N910T using Tapatalk

The only limited edition thus far is the Silver / Silver. I had read its a 500 unit run.

 

[Herdous]

Hi guys! New member here.

This is my first mod moving to sub ohm capability, from an Innokin VTR, which had many admirable qualities, but which did not satisfy me.

I'd considered many mods, but finally decided to plop down some hard cash on a serious mod and got the SX mini yesterday - and it's blowing my mind at .5 ohms with a Kanger Subtank mini! Truly.
Unbelievable what I've been missing out on...

A friend of mine introduced me to sub ohming a week ago and, compared to the VTR at 2 ohms I was using, it was hard to go back - and I just wanted to smoke again!

Glad I've now made the swtich, as I have a weaker desire to return to actual cigarettes...
LOVING this device! And, yes, I've been careful, I've read plenty and use the Ohm's law calculator regularly and keep an eye out for potential issues... Usually vape around .5 ohms at 25 watts on the new Subtank mini. Well within my Samsung 25R's safe zone...

Now to build my own atomizers... Seemed much more simple seeing my friend doing it (five [?] wraps, around .7 ohms). Will need to research it further, however...

 

[Maverik_X]

Hi guys! New member here.

This is my first mod moving to sub ohm capability, from an Innokin VTR, which had many admirable qualities, but which did not satisfy me.

I'd considered many mods, but finally decided to plop down some hard cash on a serious mod and got the SX mini yesterday - and it's blowing my mind at .5 ohms with a Kanger Subtank mini! Truly.
Unbelievable what I've been missing out on...

A friend of mine introduced me to sub ohming a week ago and, compared to the VTR at 2 ohms I was using, it was hard to go back - and I just wanted to smoke again!

Glad I've now made the swtich, as I have a weaker desire to return to actual cigarettes...
LOVING this device! And, yes, I've been careful, I've read plenty and use the Ohm's law calculator regularly and keep an eye out for potential issues... Usually vape around .5 ohms at 25 watts on the new Subtank mini. Well within my Samsung 25R's safe zone...

Now to build my own atomizers... Seemed much more simple seeing my friend doing it (five [?] wraps, around .7 ohms). Will need to research it further, however...

Welcome and good choice for a sub ohm mod. Have 2 of them now and love em. check steam-engine.org for coil builds. enjoy

 

[vapereloaded]

Hi guys! New member here.

This is my first mod moving to sub ohm capability, from an Innokin VTR, which had many admirable qualities, but which did not satisfy me.

I'd considered many mods, but finally decided to plop down some hard cash on a serious mod and got the SX mini yesterday - and it's blowing my mind at .5 ohms with a Kanger Subtank mini! Truly.
Unbelievable what I've been missing out on...

A friend of mine introduced me to sub ohming a week ago and, compared to the VTR at 2 ohms I was using, it was hard to go back - and I just wanted to smoke again!

Glad I've now made the swtich, as I have a weaker desire to return to actual cigarettes...
LOVING this device! And, yes, I've been careful, I've read plenty and use the Ohm's law calculator regularly and keep an eye out for potential issues... Usually vape around .5 ohms at 25 watts on the new Subtank mini. Well within my Samsung 25R's safe zone...

Now to build my own atomizers... Seemed much more simple seeing my friend doing it (five [?] wraps, around .7 ohms). Will need to research it further, however...

great choice of device.. I pulled the trigger on one as well. lucky to score one of the Limited Editions. for building coils I use micro coil app. works like a charm and recommends you the best range to power your builds. vape on!

Sent from my SM-N910T using Tapatalk

 

[thunderdan]

USPS came today, but they didn't delivery my yihi silicone.

They did however delivery my Ti Gr1.

 

[Dragger]

USPS came today, but they didn't delivery my yihi silicone.

They did however delivery my Ti Gr1.

Interesting. I also have an order from Varitube which includes some sleeves. USPS tracking showed it was to be delivered today, but it didn't make it into my mailbox. According to tracking, the last entry was it leaving Melbourne, FL three days ago. I often get deliveries from Washington state and California in three days total. I'm in the middle of the country.

I like Varitube a lot but I am very close to eliminating any Florida vendors from my choices. I thought if you didn't have to go through Opa Locka, things would be normal. Apparently not.

 

[Sparks]

Just dumped my post as I had thought I'd found all the vape pals an authentic M sleeve, So just read the post below for the real deal, I'll leave the pictures since I spent to much time for nothing, ha ha..
I guess I'm late to the party so what's new, LOL

 

[f1r3b1rd]

Myvaporstore has them for $4.50
http://www.myvaporstore.com/Silicone-Case-Sleeve-Yihi-SX-Mini-M-p/yih70.htm

 

[Sparks]

Myvaporstore has them for $4.50
http://www.myvaporstore.com/Silicone-Case-Sleeve-Yihi-SX-Mini-M-p/yih70.htm

Thanks haven't punched the buy button yet, still browsing, Thanks for looking out..!!

Just took a look and great deal, the savings pays for the shipping

After checking this one out and comparing both sleeves and shipping costs they came out just about the same, MyVapeStore wanted like $6 shipping and Vaping Art was $2.95, geez and that's from a FL store which is always a weird place to buy from. Not that I'm all that cheap, but ...

 

[Mazam]

Myvaporstore has them for $4.50
http://www.myvaporstore.com/Silicone-Case-Sleeve-Yihi-SX-Mini-M-p/yih70.htm

That cheap?

Having my doubts the fit is going to be any different.

 

[f1r3b1rd]

That cheap?

Having my doubts the fit is going to be any different.

From what I've read it fits better than the aftermarket one. not sure how much better, but hopefully ill have it tomorrow.
If so ill post.

 

[Maverik_X]

From what I've read it fits better than the aftermarket one. not sure how much better, but hopefully ill have it tomorrow.
If so ill post.

same boat waitin for the vape mail

 

[Maverik_X]

That cheap?

Having my doubts the fit is going to be any different.

its made by yihi, Im sure it will be quite better then the aftermarket ones. they have the actual cast's and blueprints

 

[vapereloaded]

Interesting. I also have an order from Varitube which includes some sleeves. USPS tracking showed it was to be delivered today, but it didn't make it into my mailbox. According to tracking, the last entry was it leaving Melbourne, FL three days ago. I often get deliveries from Washington state and California in three days total. I'm in the middle of the country.

I like Varitube a lot but I am very close to eliminating any Florida vendors from my choices. I thought if you didn't have to go through Opa Locka, things would be normal. Apparently not.

mine came in today from varitube. I love them, their free shipping is always priority. 2 days from Florida to Cali.

Sent from my SM-N910T using Tapatalk

 

[Maverik_X]

mine came in today from varitube. I love them, their free shipping is always priority. 2 days from Florida to Cali.

Sent from my SM-N910T using Tapatalk

You must have paid off the Oompa Lumpas to get your shit faster. I've had several packages just sit in that sort facility for days

 

[vapereloaded]

You must have paid off the Oompa Lumpas to get your shit faster. I've had several packages just sit in that sort facility for days

lol... she's a beauty... silver on silver with my silo beast.

Sent from my SM-N910T using Tapatalk

 

[Maverik_X]

lol... she's a beauty... silver on silver with my silo beast. View attachment 24884

Sent from my SM-N910T using Tapatalk

wheres the serial number printed at? or did you luck out and not get one lasered on the side? stunning mod

 

[vapereloaded]

wheres the serial number printed at? or did you luck out and not get one lasered on the side? stunning mod

I got the new batch.. it's etched at the bottom of the frame. pic is a little blurry but the serial number is clearly etched.



Sent from my SM-N910T using Tapatalk

 

[f1r3b1rd]

Congrats!! Nice mod!

 

[Mazam]

Yeah, silver looking good.

 

[f1r3b1rd]

Fuck the entire state of Florida is a black hole for usps, I'm 2 states away and my sleeves from varitube haven't moved in 4 days
Eta was yesterday .... still in Melbourne