Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Happy Friday ladies and gents!
For your evening viewing consideration....
For your evening viewing consideration....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I think most squonkers are a little squirrelly anyway you slice it....
Stunning mod!!!!
Happy Friday ladies and gents!
For your evening viewing consideration....
Yes, I did check that. I have one of the Velocity clones which had the block in it. Unfortunately, the pin just wasn't included. I emailed the seller on Ebay but, I don't expect much.
However, I did find some cap screws on Amazon that have the hole already drilled. I have some coming beginning of the week. We'll see if they work after some fitting.
Chris
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Man, what a pisser
Makes no difference, just reversal of the contacts to complete the circuit. Pos becomes neg etc.
seems like you would get a little jolt from the cap when it touches your lips but nope.
I don't recommend doing this btw. Or endorse it. I did it for science.
OK, I finally got my Wanko! It has waaay too much air for my liking but I will put a coil or two in it and see how it goes. It has a bf pin in the spares bag so that is one good thing it has going for it. I'll be back with more in a day or three.
Not his time, lol...
Got one "on order" with ya. Plus picked something up in classifieds. Plus bought a "cat tree". Plus am "eagerly" waiting to see what teenager fender-benders are gonna cost me.
Yes, that's plural.
Got one "on order" with ya. Plus picked something up in classifieds. Plus bought a "cat tree". Plus am "eagerly" waiting to see what teenager fender-benders are gonna cost me.
Yes, that's plural.
It's got your name all over it!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Le pew, Larry
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hi guys! Just posting an introduction. I've been lurking this thread for a while now, but hadn't set up an account to post until now. For background, I've been vaping since about 2009 and squonking for about the same amount of time. From original wood REOS to Journeyman, to Ali'ai, to vapage v mods, mr. puffers, etc etc etc. Currently my daily rotation is 4 REO Grands, a couple VT Inboxes, a few Wraiths, a few frankenfakes, and a pico squeeze or two. I also have a bunch of non squonk stuff, but it's not really the way I like to roll, so I won't list that stuff. It mostly collects dust. I have two custom commissions underway; a 20700 powered SX350J bottom feeder and a Dicodes BF60 powered squonker. Anyway, just wanted to say hi. I hope to be more active around here and maybe make a few friends. Carry on!
Oh, forgot to mention, I just made a couple VTC mini powered squonkers with the 3D printed kit available from Italy. I like them. Running Arctic fox on them.
Oh, forgot to mention, I just made a couple VTC mini powered squonkers with the 3D printed kit available from Italy. I like them. Running Arctic fox on them.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Welcome to the bonkers thread ... and VU
Why thank you!!!
Welcome aboard......
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I think these teeny little squonkers are the future - after trying the cheapo Frankenskull clone I am convinced of it
Not his time, lol...
Got one "on order" with ya. Plus picked something up in classifieds. Plus bought a "cat tree". Plus am "eagerly" waiting to see what teenager fender-benders are gonna cost me.
Yes, that's plural.
We just got a new cat tree too! WOOT!
Orcas are swimming around NJ someplace as of today, shouldn't be too long now!
And you know, regarding those fender benders....
Forgiveness is always free.....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
We just got a new cat tree too! WOOT!
Orcas are swimming around NJ someplace as of today, shouldn't be too long now!
And you know, regarding those fender benders....
Forgiveness is always free.....
Almost nailed it ---
PS this is the best firing button placement of all my mods - perfect
It can never be done. I guarantee you that.
I may have borrrowed the same-ish shade so I could get the color transition I wanted from the door to the enclosure, but Lucy will always be one-of-a-kind
LOL! I just couldn't resist the sale! At 10 bucks a piece and $2.50 shipping, the bf pins are worth the money....sort of
Howdy. Wonder if you could provide more info on the VTC mini do-wah you mentioned...,
It's an Italian mod using the VTC mini chip. They're roughly €140 or so, but you can buy the case and put the chip yourself, the run €39. I've lookingot at them for a while now.
For got the important part, the site is Svapiamo.
Someone with the clone hadaly and authentic can you tell me the real difference between the two. It it just the plates? The clone is working great for me but if the real deal is much better can someone show me why.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Cool. Thanks...
DNA 40 large screen with the ultra cup 22mm that can be pushed down to a 14mm cup
Sent from my XT1585 using Tapatalk
A dicodes bf60 board is a direct replacement. The swap is easy.
Sent from my XT1585 using Tapatalk
Cloud_Generator
Member For 4 Years
There must be something wrong with me!!!!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
There are many, many differences, somewheres way back I think I posted some comparison photos of the decks and specifically the clamps, which are definitely inferior to the authentic.
On the authentic, I vape it with the air half shut. On the clone, I have to go wide open.
The flavor is much better and vapor is denser from the authentic.
I keep hearing that clones are okay. Has not been my experience. My Chalice, my NoFear, my MantaV2, my Origen Little, my NarDa - all superior to clones. I'm hoping @Cloud_Generator's Vortice and Hyper Matty will be good too ...
Squonking is not just for toodle puffers anymore. Got the series dual 18650 from Sonar and I'm digging this. Running dual triple core fused claptons on a squonkified Goon and this is the vape and convenience I've been looking for...
CJ
VU Webmaster
Staff member
VU Senior Leadership
VU Senior Administrator
VU Administrator
Senior Moderator
VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
I'd like info on a DNA60 or Dicodes BF60 squonker
Told you you would like the shift.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Did you try the charm yet LucyHank pestered me about it first though
Don't drip and drive. SQUONK
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
No, lol
I did take it out of the package though - feels rough. Maybe tonight ---- I need to do some mixing anyway
I take the clips out of mine and put 2 coils in there.LOL! I just couldn't resist the sale! At 10 bucks a piece and $2.50 shipping, the bf pins are worth the money....sort of
Hey everyone!
I had sort of a fun idea for the prototype top-fire, "pigpen". In the spirit of testing and a little faith in my good humans, I was thinking I'd like to get him out and about, on a little bit of a scenic tour per-se. Here's the idea:
No money exchanged, the temporary owner of pigpen pays shipping to the next person in line and that's it. since I'd like to keep pigpen in rotation amongst known individuals, I'd prefer that it stays among members here where we can share our thoughts on the device and its journey.
The time for possession isn't set, but it should be moderate. No more than a month in your hands before sailing off to the wild blue yonder. Maybe you can add a note, initial the enclosure, whatever your little heart desires.
When pigpen's journey has ended and nobody else is interested, the person in possession can message me and I'll PayPal you the funds to ship him back. Same goes if he breaks.
I don't know how many of you folks would be interested but I love the social experiment of the idea and am willing to start the ball rolling asap!
I had sort of a fun idea for the prototype top-fire, "pigpen". In the spirit of testing and a little faith in my good humans, I was thinking I'd like to get him out and about, on a little bit of a scenic tour per-se. Here's the idea:
No money exchanged, the temporary owner of pigpen pays shipping to the next person in line and that's it. since I'd like to keep pigpen in rotation amongst known individuals, I'd prefer that it stays among members here where we can share our thoughts on the device and its journey.
The time for possession isn't set, but it should be moderate. No more than a month in your hands before sailing off to the wild blue yonder. Maybe you can add a note, initial the enclosure, whatever your little heart desires.
When pigpen's journey has ended and nobody else is interested, the person in possession can message me and I'll PayPal you the funds to ship him back. Same goes if he breaks.
I don't know how many of you folks would be interested but I love the social experiment of the idea and am willing to start the ball rolling asap!