Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Forced Patina'd one of my Brass CC's
This effect was done with equal parts White Vinegar and Hydrogen Peroxide heated to a boil and then repeatedly applied to achieve this look
Thank you so much for this tip/home chemistry project
I've been doing a Coppervapes Brass and it's just really cool/fun. I know I should stop now, 'cause it looks fuckin' killer (mine has maybe 20% bluish tones in there, perhaps the brass alloy is different), but I don't know if I can stop now....Bwaaahahahaha
Thank you so much for this tip/home chemistry project
Couple pics.
That Looks Killer !! Great job Alby
It really is a fun project and as you now know, it's quite addicting seeing all the different patterns and effects you can create 
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
don't know if posted already but geekvape gbox s100 in stock. 48 bucks free shipping
https://www.cvapor.com/geekvape-gbo...ies.html?acc=d645920e395fedad7bbbed0eca3fe2e0
https://www.cvapor.com/geekvape-gbo...ies.html?acc=d645920e395fedad7bbbed0eca3fe2e0
Sweeeeeeeet!!!
More info please, like how big is it?
From the pics, it looks about the size of the Dripbox 160?
Last edited:
Am I the only one that has avoided it simply because of the battery/bottle door design? It bugs me that to take out the bottle you have to open the battery compartment.
That's the same idea as the Wraith, but in this case you have to deal with two batteries and the bottle.
so... i rushed through floris check out, clicked the add to cart on thumbnail page, which gave default options
... including not drilling the 510...
i have a drill press, thinking delrin could easily grab, so new bit for a pilot hole + 11mm hole, shallow quick incisions, kinda tap tap tapping my way through
amIright?
... including not drilling the 510...
i have a drill press, thinking delrin could easily grab, so new bit for a pilot hole + 11mm hole, shallow quick incisions, kinda tap tap tapping my way through
amIright?
Indeed, sir...!
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I could see that annoying some people for sure. But since dual regulated sqounkers are rare, beggars can't be picky lol
Sent from my SM-G935V using Tapatalk
I still think Kanger got it right on this particular design decision, but I can see where it would just make sense to swap batteries at the same time as filling the bottle, so maybe it's not as bad a decision as I thought.
I have the Dripbox 2 and the Wraith. I had a 160. None of the issues raised have ever proven true in my experience. The Wraith door requires some care to use properly. It's still solid and reliable in my experience. I could see where ham-handedness might present problems...
Therion is a pain to change battery till you get hang of it.
Don't drip and drive. SQUONK
I've never ordered from that company. Any history with them? Good, bad, indifferent?
This vaping thing has resulted in me ordering from many different overseas sites. I'm just trying to make sure I don't end up using a questionable site.
Chris
If it hadn't shipped send him a message with your order and tell him you need it changed, he's accommodated me more than once as a result of my derpiness...
already shipped, it was pretty quick
googling up, some recommend brad point wood bits, others fluted HSS?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I've never ordered from them either personally.I've never ordered from that company. Any history with them? Good, bad, indifferent?
This vaping thing has resulted in me ordering from many different overseas sites. I'm just trying to make sure I don't end up using a questionable site.
Chris
already shipped, it was pretty quick
googling up, some recommend brad point wood bits, others fluted HSS?
I once had someone ask if they could put a "glowing red nail" through the box to make a different hole.
Uh.... sure?
The small amount of delrin I've actually worked with was all done using high-speeds and slow, slow pressure on the feed. I can't say how your mileage will vary, as with anything I'm just adding another opinion to the internet lol
Just pilot then 10mm, or gradually step up do you think?
Sent from my LG-H815 using Tapatalk
I'm not sure a pilot hole is necessary if you are using a press and can get it fixed to the correct position before drawing the bit into the material....
if I were somehow ever brave enough to attempt it with a handheld I'd go for a pilot hole though. I could see a bit just walking all over this stuff.
And 10mm isn't too large of a bite at once if you have a quality bit and the proper speed / control of depth. I'd probably opt for a steel cutting bit to stay away from the chiseled edges on a wood bit, I could see them being problematic on a plastic.
Buuuuuut you'll also have 22mm of 510 plate covering it. As long as you don't go completely bonkers on the hole you will be able to cover any imperfections.
Buuuuuut you'll also have 22mm of 510 plate covering it. As long as you don't go completely bonkers on the hole you will be able to cover any imperfections.
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
If you choose the brad points, you will want to bore with a single pass. The "brad" needs some meat to stabilize the cutting edge.
A standard, all purpose twist bit should, of course, use a pilot hole to stabilize the cone shaped tip.
I saw a video where the reviewer sniveled nonstop about that. Apparently he was fooled every time he opened the door. Didn't stop me from ordering one, should be here tomorrow...
Vapemail from Minimalistsaint.
Built and vaping.
Let us know what you think of it, please.I saw a video where the reviewer sniveled nonstop about that. Apparently he was fooled every time he opened the door. Didn't stop me from ordering one, should be here tomorrow...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I got used to it with the Wraith - it ain't no thing. Bugged me a lot at first though.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Fuck yeah.
Lukkos & Chalice III
Delays in firing, accuracy, efficiency in terms of battery life..balanced battery charging and discharging..the usual
Sent from my iPhone using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Working on testing results. Should have a formal review done in a few days. Battery life is good. Seems the same as most dual battery mods. I don't test balanced charging as I don't recommend doing so in any mod. Power mode is accurate and temp control works well
Sent from my SM-G935V using Tapatalk
https://tiberian-vapor-co.myshopify.com/collections/atomizers/products/mulciber-atomizer
this is the real deal ...
this is the real deal ...
Cool