Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Pics or it didn't happen
They are Lukkos Silk bottles.And they are sold out everywhere since I think they are half the price of the Sunbox bottles.They also make a little metal end that you stick in the bottom of the tube that has notches cut into it so that you don't have to cut a notch in the end of the tube itself.Those are cool,and cheap.But shipping would be expensive for just those.
85% cocoa dark chocolate
2.5 minutes nuked on medium
3ml 36 mg/ml wta. 1ml 100mg/ml nic
Set in fridge and carve
3 gram square
Nice mild burn Akin to a chilli chocolate. Creeping up buzz over a half hour. Barely vaped in that time
Sent from my LG-H815 using Tapatalk
It is a CCV or a CCII
Dually is a tmod name.
V is the triangle. ii the long thin
Sent from my LG-H815 using Tapatalk
My advice is check battery voltage after every change. Make sure they are even. If not then give contacts a scrub and no ox id.
Mine is off balance more often than my duallies
Sent from my LG-H815 using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Ate it.
They are just for measuring small quantities. My DIY liquid isn't that precise, so not used much
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hmm, never thought about ingesting WTA that way
I'll keep it in the fridge. Cold chocolate is more suited to really savouring one squareWell, if you're like me you are going to be sucking all that choccy goodness, not chewing
Sent from my SM-T819Y using Tapatalk
I think the Lukos Silks are better. Better squonkable action anyway. The 2 Sunbox bottles I splurged on are so soft the bounce back takes 10+ seconds.
Also if you have access to Kanger pro-tank coils with the piece that comes out of the bottom, you can use that piece like the Lukkos feeder things.
What's your preferred vaping style? MTL or DLH or RLH?
Sent from my iPhone using Tapatalk
I'd have to say direct lung cause I dent know what rhl is lol
The Hadaly or the Narda are good RLH atties. I only tried the Narda clone, but it's so good that I have three. The clones are well priced. For MTL you can try the RM 2 from reosmods. Inexpensive and gives very good flavor. As for moderately priced DLH atties, I'm afraid other people around here can give you a better informed opinion. My experience is rather limited in this regard to the M Atty that Catfish squonkified. I heard good things about the Goon and the Goon LP though.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I found the Hadaly to be a bit too airy at one hole per side open. Love my Nar. Love my OL16s too.
I had a velocity when they 1st came out. Way too airy for me.
I was about to say that, it's more of a clouds rda vs flavor in my mind.
Sent from my iPhone using Tapatalk
I'm going to guess and say get a velocity or hadaly. Hadaly shen ray clone either can be had for less than 20 bucks from China. The hadaly is less air than velocity but not mouth to lung.
Don't drip and drive. SQUONK
Don't drip and drive. SQUONK
Yea clouds for days. I like restricted lung pull with a small chamber. The Nar is the exception to this.
I've yet to try the narda, I'll have to check to see if that's one of the ones(clones) hank sent me. Currently I'm using my Origen little and I couldn't be happier
Sent from my iPhone using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I can't really recommend the Velocity clones for squonking - there are many better ones out there
The Hadaly is great flavor atty - like @SteelDriver said, look for the ShenRay clone. I don't have one, but he does and would know
The SXK Hadaly clone is junk
I used to use limtless rdta and higher watts and my hadaly clone is just as satisfying without burning my touge lolI can't really recommend the Velocity clones for squonking - there are many better ones out there
The Hadaly is great flavor atty - like @SteelDriver said, look for the ShenRay clone. I don't have one, but he does and would know
The SXK Hadaly clone is junk
Don't drip and drive. SQUONK
Daaang! Now I'm admiring a piece of wood
So I may list my CC so I can get a side by side one, probably try and trade my current cc for some other squonker out there. Thoughts?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited:
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Whachu takin' bout Willis?? Manta v2? Where? couldn't find it!
Looks really nice...!
Hell yes.....!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
No shit - that tiny short DT made me think it would be a real scorcher - that has not been the case at all
Looks like crotch-feather walnut?
Last edited:
Got a package from Fasttech today, came REGISTERED.
Why? Had to go to PO and sign for it. Thought it was legal papers for something - nope, it's a Fasttech crap-grab checkout, drunken-ordering maybe, a bunch of shit I forgot I had on the way.
Darth Vader keychain. Drip tip for a goon doesn't fit. That kind of thing.
Oh, and a Firefly.
So I did what I do - put my basic everyday build in it for fair comparison. Dual, 27g kanthal, 5.5 wrap, 2.5mm for exactly 0.46 ohms.
But figured, OK...one long leg, so the coil is somewhat near the airhole, and tilt 'em, so the wick isn't 1/4 mile from the juice, and tuck the other side of the wick back around, so it's not wicking juice INTO the airhole.
Fail. Tastes like crap.
I'll give it one more go, some other way...
Shoulda listened @minimalsaint...but you know...I liked the look, even knowing the design was retarded.
Why? Had to go to PO and sign for it. Thought it was legal papers for something - nope, it's a Fasttech crap-grab checkout, drunken-ordering maybe, a bunch of shit I forgot I had on the way.
Darth Vader keychain. Drip tip for a goon doesn't fit. That kind of thing.
Oh, and a Firefly.
So I did what I do - put my basic everyday build in it for fair comparison. Dual, 27g kanthal, 5.5 wrap, 2.5mm for exactly 0.46 ohms.
But figured, OK...one long leg, so the coil is somewhat near the airhole, and tilt 'em, so the wick isn't 1/4 mile from the juice, and tuck the other side of the wick back around, so it's not wicking juice INTO the airhole.
Fail. Tastes like crap.
I'll give it one more go, some other way...
Shoulda listened @minimalsaint...but you know...I liked the look, even knowing the design was retarded.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Got a package from Fasttech today, came REGISTERED.
Why? Had to go to PO and sign for it. Thought it was legal papers for something - nope, it's a Fasttech crap-grab checkout, drunken-ordering maybe, a bunch of shit I forgot I had on the way.
Darth Vader keychain. Drip tip for a goon doesn't fit. That kind of thing.
Oh, and a Firefly.
So I did what I do - put my basic everyday build in it for fair comparison. Dual, 27g kanthal, 5.5 wrap, 2.5mm for exactly 0.46 ohms.
But figured, OK...one long leg, so the coil is somewhat near the airhole, and tilt 'em, so the wick isn't 1/4 mile from the juice, and tuck the other side of the wick back around, so it's not wicking juice INTO the airhole.
View attachment 78369
Fail. Tastes like crap.
I'll give it one more go, some other way...
Shoulda listened @minimalsaint...but you know...I liked the look, even knowing the design was retarded.
Need to install a breathalizer on your keyboard
Sorry for the bummer purchases, but got a great laugh out of it
I've no idea to be perfectly honest, I just grabbed a piece from the corner of the shop to make something for the wife. The rest of it was basically shit, It's about the only piece I could salvage that wasn't split, barely eeked out a box, pretty cool!
Got a package from Fasttech today, came REGISTERED.
Why? Had to go to PO and sign for it. Thought it was legal papers for something - nope, it's a Fasttech crap-grab checkout, drunken-ordering maybe, a bunch of shit I forgot I had on the way.
Darth Vader keychain. Drip tip for a goon doesn't fit. That kind of thing.
Oh, and a Firefly.
So I did what I do - put my basic everyday build in it for fair comparison. Dual, 27g kanthal, 5.5 wrap, 2.5mm for exactly 0.46 ohms.
But figured, OK...one long leg, so the coil is somewhat near the airhole, and tilt 'em, so the wick isn't 1/4 mile from the juice, and tuck the other side of the wick back around, so it's not wicking juice INTO the airhole.
View attachment 78369
Fail. Tastes like crap.
I'll give it one more go, some other way...
Shoulda listened @minimalsaint...but you know...I liked the look, even knowing the design was retarded.
I just don't get the fucking thing. it looks cool AF for sure, but everything else.... just.... why?
Don't you think it would suck even worse as a RDA for straight dripping? I see those air channels just loading up. SMDH.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I've no idea to be perfectly honest, I just grabbed a piece from the corner of the shop to make something for the wife. The rest of it was basically shit, It's about the only piece I could salvage that wasn't split, barely eeked out a box, pretty cool!
I just don't get the fucking thing. it looks cool AF for sure, but everything else.... just.... why?
Don't you think it would suck even worse as a RDA for straight dripping? I see those air channels just loading up. SMDH.
Your Mrs is mighty lucky to have such a wood provider
Hmmm.
So I went the other way - it was so far from good, I didn't think tweaking my 1-wire duals was gonna fix anything.
So here's a cheap premade clapton. I hate claptons on my 99%-of-the-time single battery mechs, so that means this goes on the Wraith.
And you know what? It's vape-able. Decent flavor. Will have to see if I get spitting, like I sometimes do with these crap coils - it's really not me...it's the "Vapesoon" chinesium wire I think. But at least there's some flavor - and it's pretty much the flavor it's supposed to be.
Setup LOOKS good, anyway!
'bout 0.5 ohms, 30.5 watts. "don't need no TC" mode.
So I went the other way - it was so far from good, I didn't think tweaking my 1-wire duals was gonna fix anything.
So here's a cheap premade clapton. I hate claptons on my 99%-of-the-time single battery mechs, so that means this goes on the Wraith.
And you know what? It's vape-able. Decent flavor. Will have to see if I get spitting, like I sometimes do with these crap coils - it's really not me...it's the "Vapesoon" chinesium wire I think. But at least there's some flavor - and it's pretty much the flavor it's supposed to be.
Setup LOOKS good, anyway!
'bout 0.5 ohms, 30.5 watts. "don't need no TC" mode.
Didn't get that fucking address sign finished though lol
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
That well looks awfully deep. How does it drain?
Oh I don't even know.
Done messing with it for tonight.
Now have the following on my desk:
They all drain great!
Done messing with it for tonight.
Now have the following on my desk:
- Coppervape/Maker
- Coppervape/Goon22
- Reo/Nuppin
- Galaktika/Nuppin
- and MinimalDolphin/ChiNarda
They all drain great!