Squonkers are Bonkers

[The Cromwell]

According to our friend @The Cromwell, the v2 repair kit from FT has a shorter replacement screw that does not bind and cause misfires like the OG can do (this is my understanding of what he has told me a few times)

Surprised he hasn't chimed in on this sure he will sometime soon

No! it is the V1 kit.
I only have V1 CV's.

The sctrew in the repair kit from FT has a non threaded shoulder which allows the screw to be snugged up in the button and the head on the screw is shorter. Which allows me to put a thin inside serrated washer between the screw head and the positive spring/strap.

 

[Passafire]

Is there anything out there besides the hadaly that you can find glass caps for? I am not to keen on $85 atties, but I seriously drool over every picture I see of folks using the clear glass caps.

Any other single coil 22mm atties with glass cap options?

 

[JuicyLucy]

No! it is the V1 kit.
I only have V1 CV's.

The sctrew in the repair kit from FT has a non threaded shoulder which allows the screw to be snugged up in the button and the head on the screw is shorter. Which allows me to put a thin inside serrated washer between the screw head and the positive spring/strap.

I'll fix that in the OP

 

[TrollDragon]

Is there anything out there besides the hadaly that you can find glass caps for? I am not to keen on $85 atties, but I seriously drool over every picture I see of folks using the clear glass caps.

Any other single coil 22mm atties with glass cap options?

Pick your poision...
https://www.fasttech.com/search?RDA Glass Cap

 

[inswva]

Pick your poision...
https://www.fasttech.com/search?RDA Glass Cap

That search brings up the crack pipe atty which never fails to amuse me. For those vapers starved for attention from law enforcement.

 

[Train]

For you "tight draw," tiny atty fans...
I haven't heard much about this one, but it looks kinda interesting, and those 16mm choices are limited...
Le Papillon clone

 

[BrewBear]

For you "tight draw," tiny atty fans...
I haven't heard much about this one, but it looks kinda interesting, and those 16mm choices are limited...
Le Papillon clone

View attachment 85539

It looks good, but depending on the bf pin and how it drains, those deep wells are a juice puddle waiting to happen.

 

[all_thumbs]

Is there anything out there besides the hadaly that you can find glass caps for? I am not to keen on $85 atties, but I seriously drool over every picture I see of folks using the clear glass caps.

Any other single coil 22mm atties with glass cap options?

Supposedly the Fasttech Narda bellcap fits on the Ourmier Wasp Nano. It did not fit on my Narda though. Most of those clear caps are plastic by the way if they're on squonkers.

 

[Sir Kadly]

Supposedly the Fasttech Narda bellcap fits on the Ourmier Wasp Nano. It did not fit on my Narda though. Most of those clear caps are plastic by the way if they're on squonkers.

Got a link? I just tried searching on FT and didn't find any glass.

 

[JuicyLucy]

Supposedly the Fasttech Narda bellcap fits on the Ourmier Wasp Nano. It did not fit on my Narda though. Most of those clear caps are plastic by the way if they're on squonkers.

I'll have to find mine. It didn't fit my ChiNarda either

 

[Passafire]

I'll have to find mine. It didn't fit my ChiNarda either

Ooh ooh let us know! I LOVE my wasp so this would be perfect!

 

[~Don~]

Mölly has landed... Squonkified my Goon til the other attys arrive...

3.62v at the atty not to shabby.

Bottle that comes with the mod is absolute shit...glad I ordered a bunch of those silicone ones you guys linked a while back.

Overall I like the mod.

Picture for SaGs

Sent from my iPhone using Tapatalk

 

[all_thumbs]

"Temporarily" sold out.
https://www.fasttech.com/products/0/10021656/4699000-replacement-pc-tank-for-narda-rda-atomizer

According to the reviews there it supposedly fits a bit better if you use the o-rings that come with it but I put it aside for later because I didn't want to mess with it.

 

[all_thumbs]

Mölly has landed... Squonkified my Goon til the other attys arrive...

3.62v at the atty not to shabby.

Bottle that comes with the mod is absolute shit...glad I ordered a bunch of those silicone ones you guys linked a while back.

Overall I like the mod.

I love the way the Molly looks but am never on the ball enough to get one when they release them.

 

[~Don~]

I love the way the Molly looks but am never on the ball enough to get one when they release them.

When I joined the FB group... they had a batch going up that Saturday ( Joined June 14th ) I sat there and second guessed it over ordering the Boxer...they sold out fast...The following weekend ( this past Saturday ) they had more...grabbed one, ( they had 5 colors ) shipped out Tuesday and Vaping it today.

If you're wanting one, going from my observation...They place them on their site early on Saturdays.

 

[jcash74]

Can anyone recommend good bottles for the wraith sqounker? It's only a 5ml bottle so the previous links won't work.

 

[Zaxxaz]

Can anyone recommend good bottles for the wraith sqounker? It's only a 5ml bottle so the previous links won't work.

The bottle used in the wraith is actually a standard 10ml size juice bottle,so any will work as long as you put the top part with the tube on it.

 

[SirVtHondaGuy08]

Another one of hanks atties, not a bad little one.


Sent from my iPhone using Tapatalk

 

[The Cromwell]

Seven hours cleaning garden fence rows.

Had to refill the CV 2 times!
And change the battery once.
It is a good walk to the garden so I take my travel kit with me. Batteries, juice, etc.
and of course I have one of these in my Garden shed.

 

[BrewBear]

Seven hours cleaning garden fence rows.

Man alive! Who did you piss off?

 

[gopher_byrd]

The @Sonar505 box has arrived! Didn't have time to put a build on it yet, but that will be rectified as soon as this freaking phone meeting for work gets finished. Pics or it didn't happen...

 

[gopher_byrd]

Man alive! Who did you piss off?

He's a gentrified elitist with the big plantation... :lol: Just kidding Cromwell, I wish I didn't have to live in suburbia...

 

[Zaxxaz]

The Icarus clone mod finally got added to the 24 hours shipping section of 3fvape. So I ordered one.Also got two boxer clones,a mulciber clone,two refill bottles,ultem hadaly top cap,and two ultem drip tips already on the way from China.Not buying anymore vape gear!?!?!?At least not for the next ten minutes anyways

 

[Zaxxaz]

And I almost forgot that I ordered 5 mod maker bottles and four new batteries.My postman gonna be busy for the next month lol

 

[The Cromwell]

Man alive! Who did you piss off?

Keeps me out of the house with the wife unit.

 

[BrewBear]

Keeps me out of the house with the wife unit.

Got It! Now I need to get a looooong fence too!

 

[The Cromwell]

Got It! Now I need to get a looooong fence too!

Running electricity to my Garden shed so I can be like Todd.
My excuse is that it is for the electric fence charger.
Hope she does not notice the CAT6 cable....

Now to see if my little cube fridge still works.

 

[JuicyLucy]

Seven hours cleaning garden fence rows.

Had to refill the CV 2 times!
And change the battery once.
It is a good walk to the garden so I take my travel kit with me. Batteries, juice, etc.
and of course I have one of these in my Garden shed.

View attachment 85560

I see it has a built-in mod holder!

 

[The Cromwell]

I see it has a built-in mod holder!

Of course, but I have a belt holster for my CV's which are my out and about mods.

 

[Khanninnarh]

Of course, but I have a belt holster for my CV's which are my out and about mods.
View attachment 85564

That's awesome. Need to be quick on the draw.


Sent from my iPhone using Tapatalk

 

[R3alJim Shady]

That's awesome. Need to be quick on the draw.


Sent from my iPhone using Tapatalk

I was wondering how fast he could unlock those safeties... I mean switches!


Sent from my iPhone using Tapatalk Pro

 

[Train]

That looks like glass, but I think it's plastic. And it's been out of stock for probably 6 months...I think it's a permanent situation...

"Temporarily" sold out.
https://www.fasttech.com/products/0/10021656/4699000-replacement-pc-tank-for-narda-rda-atomizer

According to the reviews there it supposedly fits a bit better if you use the o-rings that come with it but I put it aside for later because I didn't want to mess with it.

 

[minimalsaint]

The magic mailbox was good to me today!

Damascus slam, tasty finger, kitteh approved!

 

[gopher_byrd]

And we have lift-off! Just a Hadaly clone with 26 SS316L/38 Ni80 fused Clapton 7 wrap 0.26 Ohm. Nicely vaping and hard hitting with the copper internals.

This is a quality vape! Thanks @Sonar505!

 

[BrewBear]

Wow! DUDE!!! You have OCD? I'm sorry to hear that, there's medical help for it though.... no, wait.....that's OC &D.....awww never mind!
Sorry @minimalsaint , just couldn't resist. That is a fine looking damascus cap!

 

[minimalsaint]

Wow! DUDE!!! You have OCD? I'm sorry to hear that, there's medical help for it though.... no, wait.....that's OC &D.....awww never mind!
Sorry @minimalsaint , just couldn't resist. That is a fine looking damascus cap!

Well, now that you mention it, my OCD did bring me to this atty. particularly the black delrin slam cap that came with it.
Also has a sandblasted cap, frosted acrylic 510 cap and the standard cap.
But holy shit this thing is nice. Whisper quiet and it's a damned fine vape.

 

[BrewBear]

That's the 22 mm Odis, right? What built did you put in it?

 

[minimalsaint]

That's the 22 mm Odis, right? What built did you put in it?

Yes.
And it's just my "every single coil" that I build;
24g SS316L, 6 wraps on just shy of 3mm gets me to about .5 - .6
I'll try moving the coil around a bit, the wicks aren't blocking the airflow but it's close, either way it doesn't seem to hinder the performance at all.

 

[BrewBear]

Yes.
And it's just my "every single coil" that I build;
24g SS316L, 6 wraps on just shy of 3mm gets me to about .5 - .6
I'll try moving the coil around a bit, the wicks aren't blocking the airflow but it's close, either way it doesn't seem to hinder the performance at all.

Looking good!

 

[minimalsaint]

Here's a fun fact that I can't wrap my head around...
the fancy silver moddogs connector will not allow the o-atty to sit flush, and it's not a long 510 issue. Even with the guts out of the connector it's a "no go". I had to swap over to a modmaker connector and it threaded flush. Theres a 1mm gap where it just refuses to thread any further into the connector and I'm baffled.
On the note of the fancy connectors:
I was really on the fence for awhile with them but now after using I think they are a fantastic connector... compact, no leaks and makes for a complete silver circuit.
Now...
I'm having some difficulty with the price. At nearly 3x the cost of a modmaker connector I'm not really loving them that much and I doubt they will be a mainstay in the orcas. Perhaps the occasional special or upon request, but I'm pretty resolved to sticking to the modmaker connectors overall.
Any thoughts would be appreciated, even if they are to tell me you've had enough little plastic boxes and to move the fuck along

 

[all_thumbs]

That looks like glass, but I think it's plastic. And it's been out of stock for probably 6 months...I think it's a permanent situation...

I bought one 2 months ago. Yes it's plastic. So are the Munn Bell Vape ones!

 

[BrewBear]

Yeah! I don't have a plastic box or the cash to get it so move the flock along! Seriously, we go by your say so in this, you make the mods and you have the most experience with them. It would seem fair to me if you offered the silver 510 option at a slight price increase to defray your costs.

 

[minimalsaint]

Yeah! I don't have a plastic box or the cash to get it so move the flock along! Seriously, we go by your say so in this, you make theods and you have the most experience with them. It would seem fair to me if you offered the silver 510 option at a slight price increase to defray your costs.

You just need to keep me around in case you want another Nuppin

 

[Train]

I will tell you this - after having slight 510 leaks with several other 510's, the modmakers you put in my Orca's have remained bone-dry now for several weeks. Nice solid connection point...I'm super happy with it, and would go for them again for certain.

Here's a fun fact that I can't wrap my head around...
the fancy silver moddogs connector will not allow the o-atty to sit flush, and it's not a long 510 issue. Even with the guts out of the connector it's a "no go". I had to swap over to a modmaker connector and it threaded flush. Theres a 1mm gap where it just refuses to thread any further into the connector and I'm baffled.
On the note of the fancy connectors:
I was really on the fence for awhile with them but now after using I think they are a fantastic connector... compact, no leaks and makes for a complete silver circuit.
Now...
I'm having some difficulty with the price. At nearly 3x the cost of a modmaker connector I'm not really loving them that much and I doubt they will be a mainstay in the orcas. Perhaps the occasional special or upon request, but I'm pretty resolved to sticking to the modmaker connectors overall.
Any thoughts would be appreciated, even if they are to tell me you've had enough little plastic boxes and to move the fuck along

 

[TrollDragon]

Yes.
And it's just my "every single coil" that I build;
24g SS316L, 6 wraps on just shy of 3mm gets me to about .5 - .6
I'll try moving the coil around a bit, the wicks aren't blocking the airflow but it's close, either way it doesn't seem to hinder the performance at all.

I'd rotate that coil 90 degrees CCW for much shorter legs.

 

[TrollDragon]

The YFTK bottles, Pulse and Trishul RDA's are arriving in today's vape mail. I don't know if I will be able to remove the Aeronaut 24 off of the Drone long enough to try them out, it's such a great RDA.

 

[JuicyLucy]

Here's a fun fact that I can't wrap my head around...
the fancy silver moddogs connector will not allow the o-atty to sit flush, and it's not a long 510 issue. Even with the guts out of the connector it's a "no go". I had to swap over to a modmaker connector and it threaded flush. Theres a 1mm gap where it just refuses to thread any further into the connector and I'm baffled.
On the note of the fancy connectors:
I was really on the fence for awhile with them but now after using I think they are a fantastic connector... compact, no leaks and makes for a complete silver circuit.
Now...
I'm having some difficulty with the price. At nearly 3x the cost of a modmaker connector I'm not really loving them that much and I doubt they will be a mainstay in the orcas. Perhaps the occasional special or upon request, but I'm pretty resolved to sticking to the modmaker connectors overall.
Any thoughts would be appreciated, even if they are to tell me you've had enough little plastic boxes and to move the fuck along

Can't quit yet because I need at least one more

Someone tried to buy one off of me in a pm the other day btw - uh

 

[minimalsaint]

I'd rotate that coil 90 degrees CCW for much shorter legs.

My first experience with those clamps, my coil sure did end up on the wrong side LOL
I was happy to even have the time to stick a build in it this evening, this weekend will be my chance to catch up and do a better job!

 

[BrewBear]

You just need to keep me around in case you want another Nuppin

Damn skippy I am! You didn't find that GBox, but you sure delivered on the Nuppin! Did you look at the Mulciber?

 

[minimalsaint]

Can't quit yet because I need at least one more

Someone tried to buy one off of me in a pm the other day btw - uh

Oh, I think I'll always have a few around no matter what, it's just that I think I'll step back from going for the "latest and greatest" when other options are perfectly as functional, at a much lower price point to boot.
Snobbery and all that shit as well.
Anyways, I do like the feedbacks, and @Train I'm glad you're happy, and I've never had a lick of trouble with the modmaker connector. Even doing the "hot swap" with the moddogs / modmaker connectors in the white orca for the o-atty didn't make a goddamned bit of performance difference IMHO, but I'm not a hot-rod-modder / builder either so who am I to say. Just a guy.