Kindly send me a PM on one of the orcas
Most of those fucking assholes started off with catfish-modded clones and stumbled their way into the high end market when it took off. For them to take a moral high ground now is ridiculous, and for them to stoop to the level they have is beyond comprehension.
Its ECF all over again, only on facedicks.
At any rate, the writing is on the wall, the saturation of little plastic boxes on the market and the fact that anyone with a spool of string-trimmer line and a printer can be "exclusive" just by starting a secret group leaves me with little motivation to "keep on keeping on" as it were.
That said:
I have a couple of finished orcas for sale at a discount if anyone is interested, otherwise I'll be sure to share my new personal carries as they come up!
Whoo. What a weekend for drama. Time to bury myself in another week of my day job and forget about the politics of vaping
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Done deal!
Actually, he'll build it whichever way you want -
Black Ultem, Amber Ultem, mix n match, "regular" or glassy, and sqonk hole has several optional locations for righty/lefty/pinky, whatever.
They are friggin gorgeous. If he made a mech, I'd have a problem...lol.
Black Ultem, Amber Ultem, mix n match, "regular" or glassy, and sqonk hole has several optional locations for righty/lefty/pinky, whatever.
They are friggin gorgeous. If he made a mech, I'd have a problem...lol.
Big Apple Mods is Turbocad over at ECF. He started and stayed there, much like Catfish.
His shit's just incomparable, so F-bookers caught wind of it (probably partly from good old SuperXDrifter reviews...)
His shit's just incomparable, so F-bookers caught wind of it (probably partly from good old SuperXDrifter reviews...)
I was looking at getting in on the soul s group buy becuase im apart of that group to. Im just not that into single coil, pricey rda's yet. I have a feeling ill regret it. But i just couldnt get myself to drop that kinda dough on it yet. I am still waiting on my Minimal mod and Steam Rabbit. They cant get here quick enough...
Turbo is not a mech guy. He's been playing with regulated squonkers since Evolv and Yihi boards have been around.
Big Apple Mods is Turbocad over at ECF. He started and stayed there, much like Catfish.
His shit's just incomparable, so F-bookers caught wind of it (probably partly from good old SuperXDrifter reviews...)
View attachment 87088
That is good to know. Since you gentlemen know him, so to speak, does he have a thread there, like pdib does?
he has a thread on ecf
he opens the list for a couple of days every 8 weeks, for each batch
$190 deposit at time of ordering, remainder when it is finished
next batch list to open "late july or early august" which i am waiting on and saving coin
And how much coin do I need to save before I even dream of getting a beauty like that?
@DogMan, thank you, I found the thread there. Please find some less expensive mods, will you! You got me started with the SV mods, now these.... I only have 2 kidneys, and I have to keep at least one of them.$490 usd then see below
Sent from my LG-H815 using Tapatalk
this one was train, i think
he said some other mod was not as expensive as a BAM, someone asked for pics
not my fault
Any way you look at it, all of you are a bunch of trouble making enablers.....and I thank you for it......my check book might not, but I do.
Well,that sucks,i'm still waiting for mine to get here,and was hoping it would at least be ok,but doesn't sound that way.I think mine possibly got lost,so i'll probably never see it anyway,but doesn't sound like i'm missing much,if it doesn't show up soon,i'll be fighting for a refund,that may be a blessing if it doesn't show up haha.
Hopefully you can get a refund if it's lost. I figured it would need some fiddling with to work okay,but it needs way more. Guys on the Fasttech forum have been modding the crap out of them to fix the issues it has.
Sent from my LGMS550 using Tapatalk
Remade my positive contact on Batmod today. Extremely happy with it and I think this is going to be my general design for future squonkers
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Got my aluminum coppervape and my dripbox2 I ordered from FT on July 4th in today. Man there is a huge weight diff in the brass and aluminum cv. After using the brass for a few weeks the alum. Cv feels like nothing. Now I got to play around with the db2 a little while. I figured it would be a good beater for work.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
My alum CV is my beater mod. Have a belt holster for it and it is my gardening, yardwork, mechanic, etc vape.
Pretty indestructible. Has a couple of gravel dimples and such in it but still looks nice.
So CLEAN 
So CLEAN
That's a beaut for sure! What 510 connector is that?
Sent from my iPhone using Tapatalk Pro
Remade my positive contact on Batmod today. Extremely happy with it and I think this is going to be my general design for future squonkers
Sent from my iPhone using Tapatalk Pro
Well that looks nice! Better after the rework?
Random bit the other day; ran into a vaper in the wild with a brass CV and we had a good laugh when we swapped devices for a "feel check".
Holy shit that CV is a hunk of metal! It's one of those "feel the heft" kind of devices and it was impressive! I can't imagine dropping one in my pocket like the orca, but I'm sure it's a workhorse and a handy weapon to boot!
Thanks! The actuator has a bit less resistance to it, but not much. It makes more consistent contact as well. Very happy with it!
Sent from my iPhone using Tapatalk Pro
Early beta access in 2 days *squeeeeeee!!!!
Are they doing an open beta?Early beta access in 2 days *squeeeeeee!!!!
Hi! Got the authentic Odis 16mm. Got a four wrap 2.5mm kanthal coil in it now. Is the airflow sufficient for a spaced 6 wraps? Would have liked to use it with TC when the Hcigar VT Inbox arrives.
+ Maybe wrong thread. Sorry!
+ Maybe wrong thread. Sorry!
Last edited:
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Don't know if the VT75 will do TC with kanthal?
However, if the coil fits in the Odis 16 it should vape well - that air hits the coil dead on, lol
The only chip I know of that will TC kanthal is the FSK from Hohm Tech and unfortunately they didn't make a squonk mod.
Closer to launch I'm sure, I think for Destiny it was a week or two before launch day?
Thank you! Thought about using SS. The four wrap is covered by the airflow, but a wider coil will go outside the airflow hole.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Not so clean... The YFTK SVA Styled from FT. The Coppervape is better, but waiting for a o-ring for the bottle. Really looking forward to the VT Inbox with the Maze 1.1 on top.
+ Will order with the Maze v2 instead, as it got a single coil option.
+ Will order with the Maze v2 instead, as it got a single coil option.
Last edited:
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Not an issue with this little sucker - it rocks either way
On another note, I really don't know of anyone who loved the Maze, myself included. Not terrible, but very underwhelming
Not an issue with this little sucker - it rocks either way
On another note, I really don't know of anyone who loved the Maze, myself included. Not terrible, but very underwhelming
That's great! Thank you!
It really rocks yes. Awesome flavor! Thanks for the telling me about the Maze. Nice to know! Wonder if I should get this instead of the VT Inbox. I'm happy with mechs.
+ Ordered the VT Inbox. Never owned a regulated squonker, and it seems nice.
Last edited:
Early beta access in 2 days *squeeeeeee!!!!
Call of Duty WWII beta starts next month I think. I've already pre ordered it. Never played Destiny, heard it was not great?
Edit: I am currently addicted to World of Tanks Blitz on my pc...
Sent from my iPhone using Tapatalk Pro
Not an issue with this little sucker - it rocks either way
One review at Fasttech for the Odis-16 clone recommends 15-25 watts for it. 0.7 Ohm to 1 Ohm. Do you agree?
Got a spaced 0.5 Ohm SS316 28AWG in it now, and I think the 0.7 Ohm 4 wraps, kanthal 28AWG worked much, much better.
Last edited:
Nice!Call of Duty WWII beta starts next month I think. I've already pre ordered it. Never played Destiny, heard it was not great?
Edit: I am currently addicted to World of Tanks Blitz on my pc...
Sent from my iPhone using Tapatalk Pro
Destiny is a great game if you take it at face value. Too many players expected Bungie to develop Halo all over again, and that wasn't the case, so a lot of butt hurt players gave the game poor ratings.
Me? I love it.
They have a PC version for destiny 2 also, the gameplay from E3 looks amazeballs!
I played Destiny for a while. Up until shortly after they released the first major Raid encounter. I hated the grind. It felt almost like wow all over again.
I'm grateful for wow, that's how I actually met my wife back in the Ulduar days. I call her the pug that never left. We literally had our first "date" in Darnasus. I brought cheese, wine, flowers, and I even wore a Tux. lol
I just can't handle all these games that are seemingly all about the grind. Don't have the time for em anymore.
I'm grateful for wow, that's how I actually met my wife back in the Ulduar days. I call her the pug that never left. We literally had our first "date" in Darnasus. I brought cheese, wine, flowers, and I even wore a Tux. lol
I just can't handle all these games that are seemingly all about the grind. Don't have the time for em anymore.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I recommend vaping it how you like it, lol
You're right!
It's a shame the O-atty is a no-go with the connector, I have that frosted slam cap and I was thinking about polishing it for shits and giggles.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You still have or vape the Hadaly?
I have one of the frosted slam caps that came from Phsyclone
How do you like the frosted cap? I've been debating purchasing one.
Hrm no more hadaly for me, I liked it as an atty but I've apparently become very vain and it didn't please my aesthetic side.
I've seen some fancy caps for them but nothing really that's appealed to me yet.
Have a pic?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years