Try a simple build of 3.5mm id 24g SS316L 6/7 wrap. Have fun. The Pico squeeze is an excellent starter squonk!I kinda noticed that when I tried firing it up and choked on it.I made another build that clocks in at .8.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I don't have any SS wire yet, but I did do the rest of what you said. 3.5mm, 24g 6/7 wrap. It's working pretty well. Thanks! I do have another squonker, an Inbox, which I recently got and really love. Now I need to get more. lol
You know what, I'm gonna try that build right now in my solo just for shits and giggles. It's a fucking lava spitting monster lately... Not fun!
Yeah, the 50 watt limit of the squeeze will provide you some safety. But before moving to any full mech know your shit
a general rule of safety is keep it above .3 ohms. There is soooooooo much more to this though... If in doubt ask nice people like us!
To be honest, I'm not a huge fan of mine either. I'm thinking that round wire builds might be best with this guy. I've got a 316L 26/36 ,7 wrap 3mm ID coil which comes to .3 ohms and it's a little too hot for my fruit juices.
Sent from my iPhone using Tapatalk Pro
With mechs never use less than a 20 amp battery that is Mooch approved.
Trust in Mooch and reliable vendors not wraps.
Trust in Mooch and reliable vendors not wraps.
I was running 3.5mm 24g 316L 6/7 wrap in my solo. Chickened out on the 1.3ohm (on vacation and i only have 24g on me) so i did a 10 wrap n80 @ 2.5mm. should read about .60 ohm. much, much better in the solo with airflow about half open... Try that? Once home I'll look into building it with single 1.8mm micro coil 28g build.
Just hit this .60 ohm build again
oh yeah... This is better 
Here is a pick of the BVB double barrel.
This is one of the smallest 18650 squonks I've seen.
Sent from my iPhone using Tapatalk Pro
This is one of the smallest 18650 squonks I've seen.
Sent from my iPhone using Tapatalk Pro
Haha yeah I'm basicly how you used to be. I like a good big hit with good flavor as well. I believe the Entheon takes a bigger drip dip as well, not just a small. Idk... if I don't like it I'm sure someone will buy it lol
Sent from my SM-G955U using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Signature drip tips are the shit with the Hadaly - also like the ultem cap that Psyclone sometimes sells -
I was really surprised with the Hadaly, thought it would be awful for heat, but was pleasantly surprised, but I didn't go for wild coils or super hot builds. In fact, hot builds are super avoided in Juicy's world, lol
Have you checked svf? They're kinda pricey but I got mine tonight and it's beautiful and hits like a monster! Fully engraved derlin and I've seen a few different purple doors. Plus you can have many many make any doors you want...
Sent from my SM-G955U using Tapatalk
Bet I could print these pretty easily
Sent from my SM-G955U using Tapatalk
You can
This is the first draft 20700 squonker I'm building ATM (next to the squeeze for size comparison)
What's that printed with?You can
This is the first draft 20700 squonker I'm building ATM (next to the squeeze for size comparison)
Sent from my SM-G955U using Tapatalk
What's your go to build in a Hadaly? I'm getting impatient with mine... Love it but over squonking is an hourly occurrence! I got into squonking to avoid the mess of dripping FFS!!!
Hey guys and gals! I got my svf today and I'm very very happy with it! Should get my other doors soon.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
ABS on a UP Plus 2 printer. Design is my own (drawn in FreeCAD), this one is V2.3 but I have V3.2 printed and just building it today (although I do need to brush up on my soldering skills for when I tackle the mosfetWhat's that printed with?
Sent from my SM-G955U using Tapatalk
)
Love the "hidden" atty idea. Now, get busy with a regulated one, will ya!!!You can
This is the first draft 20700 squonker I'm building ATM (next to the squeeze for size comparison)
AndriaD
Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
In a mech, the voltage is the actual voltage of the battery, which starts at 4.2v and decreases as the battery loses charge. The ohms is the coil resistance; with just those 2 figures, you can determine the amperage (current, or "I") necessary from your battery. It's safe to use sub-ohm builds, if you're using those Samsung 25R's you posted earlier, just don't go nuts with the .02 or similar super-low resistance coils -- for instance, I think you said you prefer stainless to kanthal? I'm told that those are best at about .5-ish ohms, whether or not you're using temp-control -- stainless can be used in any type of vaping.
I wish you'd stop calling yourself an idiot, because you're decidedly NOT -- you raised 2 children and you somehow manage to put up with the Dementor, so you're a better woman than I am.
I only raised one, and the last 4 months of my mom's life, I didn't see nor talk to her, because the two of us couldn't interact without a violent argument ensuing, over her choice of sugar-filled diet (she was a very sick diabetic, which is what killed her -- so I won that argument, she really did kill herself with her diet, but y'know, I'd just as soon have lost that argument.).Andria
Careful @BrewBear might mug you for that Nuppin
I decided to let that 1 slide
Yep Mooch approved and what I use in my single battery mechs down to .2 ohms.
Guess I now get to be one of the cool kids & dick around with 20700 squonker.
It is https://www.efun.top/ not efuntop.com...Cheers!
Where do i sign up? Will fit a 21700?ABS on a UP Plus 2 printer. Design is my own (drawn in FreeCAD), this one is V2.3 but I have V3.2 printed and just building it today (although I do need to brush up on my soldering skills for when I tackle the mosfet
Can't find it on iJoy's site...Odd!
Hmm front and regulated
Sent from my iPhone using Tapatalk
In a mech, the voltage is the actual voltage of the battery, which starts at 4.2v and decreases as the battery loses charge. The ohms is the coil resistance; with just those 2 figures, you can determine the amperage (current, or "I") necessary from your battery. It's safe to use sub-ohm builds, if you're using those Samsung 25R's you posted earlier, just don't go nuts with the .02 or similar super-low resistance coils -- for instance, I think you said you prefer stainless to kanthal? I'm told that those are best at about .5-ish ohms, whether or not you're using temp-control -- stainless can be used in any type of vaping.
I wish you'd stop calling yourself an idiot, because you're decidedly NOT -- you raised 2 children and you somehow manage to put up with the Dementor, so you're a better woman than I am.
Andria
Thanks for the explanation! @So619Cal has been helping me try to understand, too, although I fear he's had an uphill battle.
And thanks for the encouragement, too. I don't mean I'm an idiot about everything, just about stuff like math and mechanical engineering and whatnot. I figured out how to use the Steam Engine coil wrapping thingamajigger, but ohms and resistance and all the other terms throw me for a loop.
Broken Link
Where do i sign up? Will fit a 21700?
Sorry mate, only built for a 20700 ... and they're for my amusement
Sorry mate, only built for a 20700 ... and they're for my amusement
That's how it starts....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Think I'm using a triple fused clapton 28/36 - haven't had to build a new coil for it since June though it gets pulsed and rewicked weekly and I use it most of the day, everyday
It's a .8 ohm build, looks like I probably made it 2.5 ID, five or six wraps
Is yours authentic or a clone? My authentic ones drain perfectly and no over squonking - and I use super squishy bottles these days
You're a better man than I!
You wouldn't like it! PITA to install dual coils in the little SOB but I love the flavor.
Kinda crazy in how Modmaker now sells every thing but the body to make a squonker. And I wouldn't be surprised if they launch one real soon
Sigh...While risky it isn't an automatic boom goes the dynamite type thing.Also the Pico Squeeze isn't a mech it has a (MOSFET).So, @AndriaD has recently informed me that I'm an idiot and lucky I didn't blow my face off. Well, not in those exact words, but same same.
So, does this look like it should be okay? It's my first time building something that's not like .28 or so.
View attachment 91551
GREAT MINDS
Super Easy to use even I figured it out.
I'm just going to say that anyone who owns a noncompliant solo can take my money and make it my problem
The wire type wouldn't matter.I did notice it doesn't seem to care much for my clapton coils, so I've just been using single wire coils that I made myself. I figured it was either me doing something wrong or needing a better/different rda.
The best work around would be to use either a (Triple Twisted Wire) or use a (Parallel Coil)
Good Luck
^^^ THAT NEEDS TO BE A T-SHIRT ^^^
Yep and I got 8 of those I think.
Mine too
FB again homie
Urm...Don't dick your squonker!
Sorry I couldn't help myself.
Don't sweat the terms.Thanks for the explanation! @So619Cal has been helping me try to understand, too, although I fear he's had an uphill battle.
Simple Ohms Law Explained Below.
0.9 - Sub-ohm vaping starts here!
0.8 through 0.5 - Safe
0.4 = Risky
0.3 = Are you nuts?
0.2 = Don't even think about it!
0.1 = Just go ahead and call the EMT'S first.
0.09 or Lower = !! BOOM !!
I'm just going to say that anyone who owns a noncompliant solo can take my money and make it my problem
You don't want mine. It's an SXK clone.
Sent from my iPhone using Tapatalk Pro
