Become a Patron!

Squonkers are Bonkers

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Aren't you glad that you just bought a clone?
If it was authentic you would HAVE to love it ;)

Rare I buy an authentic first - but looked at the innards and decided no thanks. Didn't even look at a review.
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
I'm not too sure on the kanger dripbox'es my mate has one and it's a bit big for my liking, did someone say attie's? I'm all ears

Brother Spanky (@Hank F. Spankman ), is always finding new and shiny atties. He has me getting a Goon clone. I am fairly content with a few Velocity V2 clones. Got a Hathur replacement en route & and an Odis clone.

If you become enamored with using mechanicals, building your own coils, squonking as as means to quell drama ... you will have become one with the Dark Side. Don't worry we have biscuits, bisquits, cookies, muffins, cupcakes, doughnuts and even a niffty "Dark Side" membership card that entitles you to a lot of cods wallop, cruft. Or was that the "Light Side" card?
 

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Brother Spanky (@Hank F. Spankman ), is always finding new and shiny atties. He has me getting a Goon clone. I am fairly content with a few Velocity V2 clones. Got a Hathur replacement en route & and an Odis clone.

If you become enamored with using mechanicals, building your own coils, squonking as as means to quell drama ... you will have become one with the Dark Side. Don't worry we have biscuits, bisquits, cookies, muffins, cupcakes, doughnuts and even a niffty "Dark Side" membership card that entitles you to a lot of cods wallop, cruft. Or was that the "Light Side" card?

I'm going to make a bold prediction, Morley. Once you get that Goon up & running you'll be putting them Velocities in your recycling bin
 

Train

Gold Contributor
Member For 5 Years
Actually, people WERE snapping the screws on the authentic O-atty.
Glad to know I'm not the only one who thought the little teensy plates were a fail.


ANother topic - GOOD clone, the O-little. Origen. O-16. Whatever - this little tiny thingy.
images

I have clone and authentic. Restricted draw, and tight space deck - but awesome flavor and more vapor than you'd think.

And yet....lookit. Lookit.
If this had SOME kind of airflow control, I'd probably get one, even though it's like 3x the price of the clone atty...but with these holes wide open, I'm afraid it'd just be a way to move juice from the bottle to my arm. Or my keyboard. Yeah - TOO airy, with no way (even with a driptip) to restrict. But just in case you were wishing "Gee I wish there were a cloudsbro chuffcap for this teensy weensy flavor atty" - here ya go:

4307_0.jpg

Maybe I'll ask Fasttech to find/fund a clone? I'd throw $1.25 at one.
:giggle:
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
The O atty is a nice dense flavorfull vape with duals in there.

The dripbox 2 is not too efficient in TC mode.
1 bottle of juice = 1 battery.
A bottle and battery will fit into a dual 18650 battery case nicely.


But I still likes it. Only been using in TC mode now sure how it lasts in straight wattage mode.
 
Last edited:

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Actually, people WERE snapping the screws on the authentic O-atty.
Glad to know I'm not the only one who thought the little teensy plates were a fail.


ANother topic - GOOD clone, the O-little. Origen. O-16. Whatever - this little tiny thingy.
images

I have clone and authentic. Restricted draw, and tight space deck - but awesome flavor and more vapor than you'd think.

And yet....lookit. Lookit.
If this had SOME kind of airflow control, I'd probably get one, even though it's like 3x the price of the clone atty...but with these holes wide open, I'm afraid it'd just be a way to move juice from the bottle to my arm. Or my keyboard. Yeah - TOO airy, with no way (even with a driptip) to restrict. But just in case you were wishing "Gee I wish there were a cloudsbro chuffcap for this teensy weensy flavor atty" - here ya go:

4307_0.jpg

Maybe I'll ask Fasttech to find/fund a clone? I'd throw $1.25 at one.
:giggle:

Bah! Those darn teeny tiny decks, you keep them away from my fumbling fingers. Pfft! Micro coils indeed! :gaah::cuss2::headbang: If I had started out building on them, might have been different. Got spoiled starting to build on 22mm decks though. I also didn't like trying to rebuild Evod type tank coils. I think I managed to actually rebuild one, once, might have been a bit drunk then too, or ahem altered by pain medications.

Glad you enjoy these. :) I'll stay over in 22mm + land. Been seeing some 22mm + rda that have reduced chambers for flavor. Kind of a bit wasted on me, erm, KS with very little sense of taste/smell. Still, I do find myself enjoying some citrus and other fruit flavors. Black grapes are very yummy snacks that do not last around me. :)
 

urbanvape87

Member For 3 Years
Member For 2 Years
Member For 1 Year
http://www.3fvape.com/rebuildable-a...ainless-steel-24mm-diameter.html#.WD4HbtIrJDU

http://www.3fvape.com/rebuildable-a...ainless-steel-22mm-diameter.html#.WD4Hl9IrJDU

http://www.3fvape.com/rebuildable-a...ainless-steel-24mm-diameter.html#.WD4IYNIrJDU

i have a o-atty and some other kind 86(3rd link in line) something from 3f,the hadaly is seeming to be ok,as ive said a few times already...lol..i have another one on the way...blk of course. in clone heaven ha ha.

YouTube here I come! I'm so pissed I don't get to join most of the banter and fun, you lot are alive and kicking whilst I'm snoring.
These English forums are sooooo boring and everyone's so ratty on them.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
YouTube here I come! I'm so pissed I don't get to join most of the banter and fun, you lot are alive and kicking whilst I'm snoring.
These English forums are sooooo boring and everyone's so ratty on them.

This is a lively squonk hang out, the funnest and most diverse I know of
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
This is a lively squonk hang out, the funnest and most diverse I know of

Yes! Lucy would know about diverse. She diverts threads like nobody's business. One instant you're discussing squonk theory, the next you're off in some gutter dealing with tampon wicks, accidental on purpose dolphin anal sex, pegging, how we got to the point of being totally shit faced while looking at the nightly sun. ;) :) :p

You might even need to overlook six foot tall me some. I often wander around so horny I forget to squonk enough and end up posting about some idiot dodo bird using cheese as a means of instant gratification. The being horny is a side effect of the medicines I'm on, not quite grown out of puberty. :) "Me Hulk, me vape now." *squonk*
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Is there a cheap Lipo squonker on the market anywheres?

Tootle puffing okay.
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Is there a cheap Lipo squonker on the market anywheres?

Tootle puffing okay.
What is cheap? I saw the halcyon for $169. But unsire where that was or if it was a limited offer

Sent from my LG-H815 using Tapatalk
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
What is cheap? I saw the halcyon for $169. But unsire where that was or if it was a limited offer

Sent from my LG-H815 using Tapatalk

I'm hoping for something under $100. Don't need it to go over 50 W.
 

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
update on O-atty. the clamps suck. i was bothered by the clamps being crooked on my single coil build, so i took coil out and went to put on another, but was going to wrap leg of coil around the screw so there'd be wire on both sides of the clamp to create even clamping force. first of all, it was a huge pain in the ass to get the wire around the screw with the clamp plate. i had to turn it upside down for the plates to make a gap, to get the wire on both sides.

when tightening the screws on the clamp (without very much force), one of the screw heads broke off and the plate flew off and i lost it in the carpet. so the tiny screw is stuck in the hole and the plate is lost. at this point i was frustrated and dont even want to find the damn plate. :) i think the screw was weakened from my first build when the plates were uneven, causing a lot of pressure on one side of the screw head. cause like i said, i didn't screw down very hard at all.

anywho, maybe if you intend on bulding with smaller wire or dual coil build, it would be fine. but for single coil, it's really not the best design IMO.


did you gettin the o-atty from fastek?i have 2 on the way...hmm hope i dont have the same hassle.i dont use huge trick builds,mostly just 28,with a bit of flat wire twisted in for flavor popper.glad thier clones and not super expensive...still will suck though! 9$ is 9$!!
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
did you gettin the o-atty from fastek?i have 2 on the way...hmm hope i dont have the same hassle.i dont use huge trick builds,mostly just 28,with a bit of flat wire twisted in for flavor popper.glad thier clones and not super expensive...still will suck though! 9$ is 9$!!
The clamps are a bit fiddly. I got the FT clone.
I find that putting on end in first and securing it is the best way.
I got duals put in mine ok.

It is a nice atty. Just barely open enough for a restricted lung hit.
But with my duals in it it is a dense flavorful vape.
It is currently on my Dripbox 2 and I plan on ordering another O atty clone tonight.
 

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
The clamps are a bit fiddly. I got the FT clone.
I find that putting on end in first and securing it is the best way.
I got duals put in mine ok.

It is a nice atty. Just barely open enough for a restricted lung hit.
But with my duals in it it is a dense flavorful vape.
It is currently on my Dripbox 2 and I plan on ordering another O atty clone tonight.


if ya hold off i can let ya have one of my o-atty clones that were just shipped from FT.just pay shippin(2-3$) and the 9$ or whatever it is and ill send it to ya.prolly get it faster then ordering from FT yourself.LMK...i can even cut the long pin off if ya want.love my dremmel...also have a few othe hadaly clones comming from 3f.takes about 20 days for them to get to me...this last time anyways..lmk
 

pwheeler

VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
my clone goon overtook my auth stumpy.
I wouldn't say my O-atty overtook my Stumpy, but even as a FT clone, it earned a spot one one of my Dripbox160's. One thing I found interesting. I dont line up the air holes with the holes in the base. I've turned my cap to just miss the towers, and I get excellent flavor and a bit more air. Loving it now, even with a single coil, 3mm 26g Ni80, 5 wrap.

Sent from my HTC Desire Eye using Tapatalk
 

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I wouldn't say my O-atty overtook my Stumpy, but even as a FT clone, it earned a spot one one of my Dripbox160's. One thing I found interesting. I dont line up the air holes with the holes in the base. I've turned my cap to just miss the towers, and I get excellent flavor and a bit more air. Loving it now, even with a single coil, 3mm 26g Ni80, 5 wrap.

Sent from my HTC Desire Eye using Tapatalk


havent tried the o-atty yet but the goon is being used ABUNCH.for ,the price ill take the clone goon over the authentic stumpy....ANYTIME.my blk stumpy is the last hi-end atty i have left from my splurging(married)days...lol!
 

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
The clamps are a bit fiddly. I got the FT clone.
I find that putting on end in first and securing it is the best way.
I got duals put in mine ok.

It is a nice atty. Just barely open enough for a restricted lung hit.
But with my duals in it it is a dense flavorful vape.
It is currently on my Dripbox 2 and I plan on ordering another O atty clone tonight.
yeah i dont crank down on them screws a bunch...not like its a motor mount im tightening down..ha ha

gots ta pay a few bills...IRL take care ya"ll!
 

pwheeler

VU Donator
Silver Contributor
ECF Refugee
Member For 5 Years
havent tried the o-atty yet but the goon is being used ABUNCH.for ,the price ill take the clone goon over the authentic stumpy....ANYTIME.my blk stumpy is the last hi-end atty i have left from my splurging(married)days...lol!
That's all I'm doing right now is buying clones. Just got my FT Goon 22 in and not particularly fond of it at this point with the built in drip tip in it. I have authentic Stumpys and 1 clone. To tell you the truth, I can't tell the difference. Excellent clone. I have an 016 on the way now. I don't mind trying out a bunch of atties at around $9 a whack.

Sent from my HTC Desire Eye using Tapatalk
 

LuTang

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
did you gettin the o-atty from fastek?i have 2 on the way...hmm hope i dont have the same hassle.i dont use huge trick builds,mostly just 28,with a bit of flat wire twisted in for flavor popper.glad thier clones and not super expensive...still will suck though! 9$ is 9$!!

mine was a Focalecig clone. i used a 2.5mm single standard clapton, nothing huge. bout the same diameter as 24ga wire. 28 will probably work just fine. but you can kinda see in my pic, the clamps are angled. i think that stress is what caused my head to snap off.

9ofTdGG.jpg
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
i think that stress is what caused my head to snap off.

Yeppers, my head snaps off at times too from stress. :) Looking at the atty in your picture shows me all I needed to know about the Odis.

Am glad I got a clone from FT en route. :)
 
Last edited:

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I wouldn't say my O-atty overtook my Stumpy, but even as a FT clone, it earned a spot one one of my Dripbox160's. One thing I found interesting. I dont line up the air holes with the holes in the base. I've turned my cap to just miss the towers, and I get excellent flavor and a bit more air. Loving it now, even with a single coil, 3mm 26g Ni80, 5 wrap.

Sent from my HTC Desire Eye using Tapatalk

Where you been hiding Paul?
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
if ya hold off i can let ya have one of my o-atty clones that were just shipped from FT.just pay shippin(2-3$) and the 9$ or whatever it is and ill send it to ya.prolly get it faster then ordering from FT yourself.LMK...i can even cut the long pin off if ya want.love my dremmel...also have a few othe hadaly clones comming from 3f.takes about 20 days for them to get to me...this last time anyways..lmk
Oh My. too late. Submitted my order just after I posted up above.
 

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
That's all I'm doing right now is buying clones. Just got my FT Goon 22 in and not particularly fond of it at this point with the built in drip tip in it. I have authentic Stumpys and 1 clone. To tell you the truth, I can't tell the difference. Excellent clone. I have an 016 on the way now. I don't mind trying out a bunch of atties at around $9 a whack.

Sent from my HTC Desire Eye using Tapatalk


what sucks is i cant find a clone of the stumpy anywhere.someone shut them down.if ya know where i can get a clone please LMK.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
what sucks is i cant find a clone of the stumpy anywhere.someone shut them down.if ya know where i can get a clone please LMK.

You and me both
 

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Oh My. too late. Submitted my order just after I posted up above.


oh well,maybe ill like them some much i couldnt let one go...lol.i actually bought a pair of each that i sent off for.the lp goon clone is lookin like it may be a decent vape...what the hell is the sxk in front of some of the clones?new to this clone/bf'ing stuff.but way more fun then costing 150$ a piece for a freakin atty...hell even 50$ is too much!just got tired of gettin took for mods and atty's.

started by making my own dna200 instead of payin 450...sorry 425$ for a little bit cheaper mod!i must be honest,i did buy a lbc dna200 but when i got it thier were so many fuckups on it that i couldnt get over it.i cant remember who it was but someone gave me 400$(maker of the mod found someone) for it so i lost 25$ on it.was a nice mod but dayyyum i just couldnt get over it being a blem...basically. for full price.then the bullshit excuse i got from the maker really didnt sit well with me.

hell i couldnt make myself even buy the 200$ one from lostvape,they were nice looking but man 200$ is a bunch of money to this poor bastard.i ended up building 2 dna 200 of my own.yeah they aint all fancey like some of the ones out but i only have like 125$ and my time in them.i have a shell ready for another dna 200 but i havent tore one of the 2 i have apart yet to put the guts into the shell.the steamcrave 50 watt is one i gutted and made into a dna200.ya have to be careful and not over squonk so ya dont get a buncha juice into the battery/chip space.but its been a nice lil mod.ive dropped it idk how many times when im sleep vaping...lol.mashes hell out of toes though let me tell ya!!!OUCHim pretty proud of my homeade dna200 mods.i need to try a mech and see how a dually mech 18650 would come out.friend of mine has some metal lathes and wood working tools...i think we could come up with a nice mech between the 2 of us.he doesnt vape or smoke but likes to make money...lol.so im thinkin a dual 18650(mech) squonker for a fair price would go over good..whats ya'lls thoughts?IMG_20160421_202706.jpg
 

Attachments

  • IMG_20160422_205842.jpg
    IMG_20160422_205842.jpg
    30.6 KB · Views: 18

1rudedog

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
DHgate has em but you have to buy 15 I think.
ya have a link?between the folks here im sure we could get enuff of us to get a 15 clone stumpy going on...thoughts?they are clones ??i dont have the coin for a 127$ auth one.thats what they used to be with shipping anyways.
 

VU Sponsors

Top