Lol my bottle was full and it's dark in the morning!Drain, drain, drain fellas - and stop squeezing so hard
There may be some confusion. I don't mean long tails that are laying in your juice well. I'm talking about coils that sit up pretty high, which mean your tails have to be longer to reach the deck.Just makes sure they don't cover the hole of the squonk pin is about it. Instead of having my wicks sit at the bottom of the well I normally Just cut them to just touch the well. Also most of the time I squonk so I can see down the dt and I push until I see it soak the coil a little bit. So there's really no trouble wicking I think that's the main reason people hate rda's that's don't suck back very well, because your constantly flooding your rda. My 2 cents
Sent from my SM-G955U using Tapatalk
There may be some confusion. I don't mean long tails that are laying in your juice well. I'm talking about coils that sit up pretty high, which mean your tails have to be longer to reach the deck.
https://www.fasttech.com/products/0/10016343/9630557-authentic-hcigar-vt-inbox-v3-75w-tc-vw-apv-box-mod
Don’t know if this has been posted. But V3 is out and with a new silicone bottle with tube.
Sent from my iPhone using Tapatalk
Yep unless running high wattages the longer tails should be no problem.Are you referring to rda's like the dead rabbit? The coil sits way up high. There should be no problem with the juice wicking up the short distance. (Think of an oil lamp. Oil wicks up a very long wick to produce a steady flame) same concept. Cut your wick to just touch the bottom of the well and it should be fine. Hope that helps.
Sent from the Twilight Zone!
Ah ok got it. Still kinda the same thing really, well for me at least because like I said I never have a problem wicking because I squonk until my juice hits my coil a tiny bit. That could easily be irrelevant to your situation so my next question is what rda are you using in this situation?There may be some confusion. I don't mean long tails that are laying in your juice well. I'm talking about coils that sit up pretty high, which mean your tails have to be longer to reach the deck.
The drop. I havent used it yet so I was just curious. Going to throw a build in it tonight. I do vape at high wattages so we'll see.Ah ok got it. Still kinda the same thing really, well for me at least because like I said I never have a problem wicking because I squonk until my juice hits my coil a tiny bit. That could easily be irrelevant to your situation so my next question is what rda are you using in this situation?
Sent from my SM-G955U using Tapatalk
https://hazetownvapes.com/collectio...ucts/bb-vapes-bf-silicone-bottle-8ml-capacityBought where?
Yeah box mods aren't to hard, actually already have a couple laying around. lol Just never put them together and everyone else seems to only want high end mods. So there's really no market for cheap printed boxesbig thanks to @jasonandsarah for the sexy ( and stout ) coil swivel base...
Time to head to Home Depot and get the bolt, pin to make this thing shine
View attachment 102825
have no idea how giddy I am with this thing lol
Edit: I think you could of printed a box mod with how stout this thing is my goodness
Sweet u can spin me coils even fasterbig thanks to @jasonandsarah for the sexy ( and stout ) coil swivel base...
Time to head to Home Depot and get the bolt, pin to make this thing shine
View attachment 102825
have no idea how giddy I am with this thing lol
Edit: I think you could of printed a box mod with how stout this thing is my goodness
Im looking at this thing like how in the frick do u even use it
Back from Home Depot...grabbed a clevis pin (5/16) and a D-Ring, but probably end up using a smaller one from a picture frame
Now to test it out haha
Thanks again bro
Sent from my iPhone using Tapatalk
That's easy! We let @So619Cal use it, we just enjoy the coils he makes and help him by providing feedbackIm looking at this thing like how in the frick do u even use it
Sent from my SM-G950U using Tapatalk
I think the clevis needs to poke out the other side so you can clamp this side down?
But what do I know? never spun any coils.
Haha your brains not allowing you to process how it works because then you would have too start building your own coilsIm looking at this thing like how in the frick do u even use it
Sent from my SM-G950U using Tapatalk
Things like a little brick! Lol I printed it with a aluminum pla witch think is a bit heavier then other filaments? Maybe that's just my brain....Man I could use that thing as a trailer hitch. Love it!!!
Haha your brains not allowing you to process how it works because then you would have too start building your own coils
Sent from my SM-G955U using Tapatalk
These work great even for simple claptons and stuff. Doesn't have to be corrugated triple double helix demon............. staples. LolHave watched some vids on fancy coil building.
too lazy.
And not something that interests me on a hobby level.
Off topic but have you tried the juice recipe Toasted?If he needs coils already he is vaping straight molasses lol
Off topic but have you tried the juice recipe Toasted?
Sent from my SM-G955U using Tapatalk
Is that pin just sitting in there? No attachment?
Dual bearing front and rear
Small bushing on the back side
Sent from my iPhone using Tapatalk
https://alltheflavors.com/recipes/32619#toasted_by_mrburgundynope, Link? if I have the stuff I'll whip up a taster.
These work great even for simple claptons and stuff. Doesn't have to be corrugated triple double helix demon............. staples. Lol
Sent from my SM-G955U using Tapatalk
Sorry mates but I need to rant a bit.
All this bullcrap over a few damn silicone squonk bottles. No way in hell will I ever order through that FB group again. He claims he shipped, tracking incoming, wait... phone stolen, gotta cloud download, will send tracking. PM him since Tuesday for tracking, finally get tracking early am Thursday morning. Tracking still not updated, just pre-shipment, in other words hasn't been frick'n shipped.
I haven't seen a clusterfuck like that group since my army days. If he'd concentrate on maybe 3 sales at a time, perhaps he'd get something done but nooo.... he has to have 10 or even more list/docs going at once, plus waffles on top of waffles. I know he seems like a good guy, means well, has a fanbase but what a fuckin' circus. No sir, no thank you... never again.
Rant off, thank you for your participation.
This Allen? Sounds like Allen
This Allen? Sounds like Allen
....And how do you wick this coil??? Long tails or short?These work great even for simple claptons and stuff. Doesn't have to be corrugated triple double helix demon............. staples. Lol
Sent from my SM-G955U using Tapatalk
All my experiences buying from him have been stellar to be honest, but that could be because I’m 3.5hrs away from him and I’ll go get my stuff if I get dicked around.
Somehow the thought of having a pissed off customer showing up at your door and holding a stagecoach 10 gauge pointing your way would tend to make one want to ship your stuff mighty fastAll my experiences buying from him have been stellar to be honest, but that could be because I’m 3.5hrs away from him and I’ll go get my stuff if I get dicked around.
Wow why does this say signed by George W Bush? LolThis Allen? Sounds like Allen
You always use the jam packed method with this coil . No tail needed though it squonks in the ceto rda great.....And how do you wick this coil??? Long tails or short?
Somehow the thought of having a pissed off customer showing up at your door and holding a stagecoach 10 gauge pointing your way would tend to make one want to ship your stuff mighty fast
But, but, but... if you pack jam in it, will it not gunk up really fastYou always use the jam packed method with this coil . No tail needed though it squonks in the ceto rda great.
Sent from my SM-G955U using Tapatalk
Dang man sorry for gettin ya in the mess iv never had a issue with him thru several things my apologiesUnfortunately, not an option. Nothing personal, I can tell he's an OK bloke. Nothing is intentional on his part... bottom line, he just has way too many pots in the fire to be efficient.
I'll get over it, no big deal. Just needed a good rant.
I really don't even care about tracking, just ship the damn thing already.
I feel the same with that neo clownSorry mates but I need to rant a bit.
All this bullcrap over a few damn silicone squonk bottles. No way in hell will I ever order through that FB group again. He claims he shipped, tracking incoming, wait... phone stolen, gotta cloud download, will send tracking. PM him since Tuesday for tracking, finally get tracking early am Thursday morning. Tracking still not updated, just pre-shipment, in other words hasn't been frick'n shipped.
I haven't seen a clusterfuck like that group since my army days. If he'd concentrate on maybe 3 sales at a time, perhaps he'd get something done but nooo.... he has to have 10 or even more list/docs going at once, plus waffles on top of waffles. I know he seems like a good guy, means well, has a fanbase but what a fuckin' circus. No sir, no thank you... never again.
Rant off, thank you for your participation.
But, but, but... if you pack jam in it, will it not gunk up really fast
Unfortunately, not an option. Nothing personal, I can tell he's an OK bloke. Nothing is intentional on his part... bottom line, he just has way too many pots in the fire to be efficient.
I'll get over it, no big deal. Just needed a good rant.
I really don't even care about tracking, just ship the damn thing already.