Tell me about battery life?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I'll take a look, thanks.
Yup! I got the O Atty and a Hadaly for $170 together in an acquaintance's quitting vaping sale.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Oooh, it's one of the hardest (IME) to get right.
I found the 2 mm ID is about the right size to fit in the tiny well. You can go minimal with the wicking - go with what will fit easily through that tiny hole
Don't have a Pico Squeeze. Some folks on here got me interested in the Coppervape. So for mech squonkers I have a couple of them. Pico sized just a bit taller.
I really like them.
I put dual 2.5 mm SS coils in my O atty clone. Nice vape.
Thank you all, I ran across a fairly good deal on a Chalice III and I couldn't resist, tho I will be getting a RM2 also. I will try a vertical coil in it,just because. I just thought I'd ask the seasoned squonkers first. At roughly what resistance should I built?
>1
without drilling, probably above 1.2 ohm
if you drill it a bit, you could push 0.8 ohm
Dot want to speak out of turn, since I don't own one. But, isn't the dripbox 160 a series squonker?Hey guys, here's what I've been squonking on lately.
I also have a Hadaly, GP Dripper, and Hobo v3.1 around. Does anyone know of a maker of series squonkers? I'm fine with single batt mechs for single coil RDAs but I'd love to have something that can handle larger 24g builds in the dual coil atties.
Sent from my SM-G920R7 using Tapatalk
Yep it is series.
It is series but the bottle and tubing system was god awful. I had one and ended up getting rid of it because the bottles seeped with mint juices and the metal tube was a pain in the ass to clean, had to take the whole device apart to do so.
Nary a problem yet with 2 Dripbox 160's and 1 Dripbox2.
Absolutely the easiest to bottle change that I have seen.
And the little caps that come on the bottles allow you to just swap out a full bottle and put the cap on the empty one.
Only dribbles are sometimes you will get a drop or two from the bottle tube while the bottle is off.
I just sit the mod on a napkin or somesuch and no worries.
Have only had to do any wiping down of the mods if I oversquonked
As to cleaning I just sit the mod on a few paper towells with the bottle removed and squirt a few syringe fulls of water down the 510 pin.
OK I'm having a terrible time with my coopervape. I got it over the summer in one of dre's group buys. I feel like it has something to do with the fire button. I kinda have to push it at just the right spot and that spot is always changing even in mid vape. I've taken it apart a couple of times and can't get it figured out. When it works I fraking love it! I feel like those time are few and far between! I'm fiddling more than vaping! Help me please! I want it to be good, I really do. Thanks for your help.
Sent from my SM-N920P using Tapatalk
Sent from my SM-N920P using Tapatalk
You probably need to clean between the screw under the switch and the copper strap thingy.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Some have reported the need to use a file on the plastic button to make it push down smoothly - I have five of these and use three in my rotation religiously
make sure the bottle cap is screwed in tightly and the screw holding in button is secure.
Some folks also recommend giving the screw on the firing button a couple of light sideways swipes with a file.
I had one start to give me problems and someone here (I think it was Rudedog?) suggested a few sideways swipes with a file as shown below
That is what worked when one of mine started giving me problems.
I wipe mine down once a day with alcohol (usually vodka, but Everclear and isopropal also work) to keep them clean. Any gunk builds up and they tend to not to want to fire. A once a day quick wipedown is usually more than sufficient.
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
Well done Juicy Lucy
BTW FDV is in gear again.
Ordered some Squonk pins on the evening of the 16th. got them on the 19th.
Ordered some Squonk pins on the evening of the 16th. got them on the 19th.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Thanks - the file does not have to be fancy btw.
The one in the photo is from a cheap manicure set my mother gave me for my birthday back in the 90s, which I obviously don't use for fingernails, lol
KentA
VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
It's interesting that your mother enabled your vape addiction.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It's an excellent vape tool kit, lol
On closer inspection, I should use it on my fingernails
Be sure that your contact strip looks like this when taken apart if you have firing issues with a Coppervape mod. If not, adjust as needed.
Hope this helps!
Well hot damn! That did it! Vapey goodness has returned to the my coopervape. Thanks for the tips everyone! I was really about to count this guy out. I guess I gotta clean it more than I would any other mod!
Happy Friday everyone!
condensation and such seems to seep down around the switch and get on the connection between the strap and screw.Well hot damn! That did it! Vapey goodness has returned to the my coopervape. Thanks for the tips everyone! I was really about to count this guy out. I guess I gotta clean it more than I would any other mod!
Happy Friday everyone!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Well hot damn! That did it! Vapey goodness has returned to the my coopervape. Thanks for the tips everyone! I was really about to count this guy out. I guess I gotta clean it more than I would any other mod!
All mechs need frequent cleaning - it is the nature of the beast
Yeah, learning curve with mech mods got me. It worked great for the first week or so then this happened. And went into the "I don't feel like f'ing with it" Tupperware. I was cleaning up and and decided to give another go. So glad I did.
Also found my bottom feed pin for my velocity. It was a win win day!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I lost the door to my original REO clone a long time ago and never could find it - the only significant piece of vape gear I ever lost lost
When I was putting Christmas shit away a couple of weeks ago I found it in the bottom of the Christmas wrapping paper bin, lol
Must have taken it off to fiddle with something while wrapping presents last year
Also look into hellfire by the attiesmith. He makes good MTL squonk RDA
Sent from my LG-H815 using Tapatalk
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
After some time with the Yeti, I would easily recommend it over the OG Goon. It's at least $15-$20 cheaper, just as good if not better flavor, straight pin swap (M3), & I declare it might be the King Kong of Z-coil atties.
That's a 4mm ID coil folks
It's the bastard child of a Goon & a Battle Deck, with a Petri v2 deck. And I'm pretty sure the air could be shut down to a dreamy MTL
It's the bastard child of a Goon & a Battle Deck, with a Petri v2 deck. And I'm pretty sure the air could be shut down to a dreamy MTL
Last edited:
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
It's pretty damn airy. But it's quit versatile. That coil is 26g fused with 34g (316L), reads .35 on the Halcyon
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
From the Lokilab site lol
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Looks like their website might be down - I get a blank page going to it ....
Terrible RDA. Got the usual bandwagoners that jump on anything super X drifter likes, but there are far better out there IMO
Sent from my LG-H815 using Tapatalk
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
It's not terrible. I've had way worse lol
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I like my Odins a lot but they are not good for those crazy-wire builds - the hole int he center post is too small for some of the newer complicated wires. They probably can't handle anything more than Claptons
I'm just a plain old wire person for the most part.
I'm just a plain old wire person for the most part.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I've been vaping on an Odin all morning and it is a mighty fine vape, actually. Right up there
When the Odin BF came out, bf atties were far and between and expensive
When the Odin BF came out, bf atties were far and between and expensive
that looks nice!After some time with the Yeti, I would easily recommend it over the OG Goon. It's at least $15-$20 cheaper, just as good if not better flavor, straight pin swap (M3), & I declare it might be the King Kong of Z-coil atties.That's a 4mm ID coil folks
It's the bastard child of a Goon & a Battle Deck, with a Petri v2 deck. And I'm pretty sure the air could be shut down to a dreamy MTL
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Another potential downside to the Odin you should be aware of is the squonk pin itself.
It is built into the center pin and so does not drain as well as those drain down the center. It is prone to over-squonking issues if you like to squeeze a lot.
Bear is thinking of buying a new one in 2017 though. Things like rm2 are still up there, odin has been surpassed in every respect
Sent from my LG-H815 using Tapatalk
Glad I waited till last fall to get into squonking. Much more cheaper squonk stuff out there.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
A lot of people feel (me included) it is the top tight-draw MTL atty of all time. The RM2 comes very close behind it. IMHO, of course
Still plenty spendy stuff for those with no will power. Like me.
Sent from my LG-H815 using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Hi quality will shine - and it's usually expensive, sometimes WAY more expensive
It's up to each individual to decide if it's worth it or not