Ever get your Shift BF clone?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
UncleRJ
Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Reviewer
Moderator
Nary a problem yet with 2 Dripbox 160's and 1 Dripbox2.
Absolutely the easiest to bottle change that I have seen.
And the little caps that come on the bottles allow you to just swap out a full bottle and put the cap on the empty one.
Only dribbles are sometimes you will get a drop or two from the bottle tube while the bottle is off.
I just sit the mod on a napkin or somesuch and no worries.
Have only had to do any wiping down of the mods if I oversquonked
As to cleaning I just sit the mod on a few paper towells with the bottle removed and squirt a few syringe fulls of water down the 510 pin.
Will the Dripbox 2 leak when fully assembled if you lay it on it's side?
Gotta get my stupid question for the day dealt with
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Will the Dripbox 2 leak when fully assembled if you lay it on it's side?
Gotta get my stupid question for the day dealt with
If the atty is full of liquid, yes
UncleRJ
Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Reviewer
Moderator
I should have phrased that better.
More worried about the bottle of liquid leaking
has anyone had any problem with the PICO SQUEEZE that keeps firing after you release fire button?
mine worked fine for a month or so but think juice got to the button. now fire continuously whenever the fire button is pushed... Im sure at this point there is no fix that i can do. got it from fasttech. will just write it off but its a bummer.. really liked this device. just wondering if any of you have had an issue or its just a freak thing.. would like another but dont want to risk another if it's going to just happen again..
thanks for any feedback..
Doots
mine worked fine for a month or so but think juice got to the button. now fire continuously whenever the fire button is pushed... Im sure at this point there is no fix that i can do. got it from fasttech. will just write it off but its a bummer.. really liked this device. just wondering if any of you have had an issue or its just a freak thing.. would like another but dont want to risk another if it's going to just happen again..
thanks for any feedback..
Doots
checking it now. I know the atty will dribble if on it's side. I was lying in bed reading and felt wet when I realized I had laid my D2 on it's side on my chest... Duhh...Will the Dripbox 2 leak when fully assembled if you lay it on it's side?
Gotta get my stupid question for the day dealt with
Anyway will get back to ya later on the test.
it is lying on it's side on a paper towel with no atty and a just about full bottle of some Lucious Apple Fritter juice.
Whatcha think about the Shift? I kinda like it, wish it had just a bit more air though.
maybe take it apart for a good cleaning,,?
Nice for a change. I have it on a single cell tmod. Need to play with the build. But it is my standard backup device heading out
Sent from my LG-H815 using Tapatalk
I put a .6 2.5 mm SS316 coil in mine works fine on the Coppervapes.
One would think it would overs quonk bad and dribble a lot but it is hard to over squonk it.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Last edited:
Well said, and I totally agree with it. I have a Therion BF in the FT cart but I'm not sure I really want to spend that kind of money on it. Let me explain: The mod looks great and from the few people's impressions I gather it is a good mod. I have the Dripboxes 2 & 160 and like the TC squonking but I also have several other DNA mods and for my uses the chip/function is underwhelming. I'm not doing the long debate over which chip is better, after all, if you don't like it, don't get it and if you like it, more power to you. That said, I have a second Pico squeeze on its way as well as a brass Coppervape. Is there another option for TC squonk mods besides the Kangers or the DNA brethren?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
The Wraith comes to mind - but I thought you already had one?
Nope, I missed that one! I should take another look then.
Yeah it does that in my Dickie work shirt pockets as well.
Why I like the TC, I can vape the atty pretty dry before putting it in pocket.
I also carry my Kbox Mini and Subtank mini in shirt pocket with no leaks.
did you get the software for the dripbox2?
Few of the Italian and british manufacturers are using some 60 watt TC starting with Au. Can't remember the full name. And dicodes chipset
Sent from my LG-H815 using Tapatalk
I took a look at it but my English and theirs didn't quite match so I figured I'd leave well enough alone for now, at least until some other, more courageous soul with a better grasp of the technical aspect figures it out and lets us know what's what.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
thanks. tried that.
Must have a bad mosfet or switch sticking.. good to know no one else is reporting the problem. thanks everyone!
UncleRJ
Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Reviewer
Moderator
There are software updates for the Dripbox 2?
What do they do and please tell me more!
Apparently my research skills have abandoned me since the last time I purchased a new mod
Anyone even heard of this? http://www.vapinart.com/cart/NoCode-Lazy-P2475.aspx
Not played with it yet but it is under Firmware at kangertech.com I have looked at it but not used it on the mod though.There are software updates for the Dripbox 2?
What do they do and please tell me more!
Apparently my research skills have abandoned me since the last time I purchased a new mod
Looks interesting kind of a mini DNA thing.
yeah, the tired and the lazy both take pre made coils
rob fisher did a good youtube review of one, i think the wider diameter one was regarded as the better of the two
I had some runon firing on a Dripbox (og dripbox) - which similarly has the fire button right under the atty.
I kind of squeezed some iso alocohol in around the edges of the button, hoping to "unstick" something that might have gotten liquid on it, in an inaccessible place. Because that's what it seemed like - an actual sticky button...
And it seemed to help...for a little while. Not long though. It died completely about a week later...my first dead mod, ever.
Squeeze hasn't had fire button problems at all though...
I kind of squeezed some iso alocohol in around the edges of the button, hoping to "unstick" something that might have gotten liquid on it, in an inaccessible place. Because that's what it seemed like - an actual sticky button...
And it seemed to help...for a little while. Not long though. It died completely about a week later...my first dead mod, ever.
Squeeze hasn't had fire button problems at all though...
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
The Squeeze and dripbox seem to have the same bottle/tube system.
sorry i didnt know you had did the awesome job of showing how to fix the firing..or misfiring of the CV.way better then my lil red scribbles.
if ya want an extra i have an old red reo doorjust shoot me your snail mail and its yours...i my have a few other extras for a reo too...just offering.im reo-less these days..lol.I lost the door to my original REO clone a long time ago and never could find it - the only significant piece of vape gear I ever lost lost
When I was putting Christmas shit away a couple of weeks ago I found it in the bottom of the Christmas wrapping paper bin, lol
Must have taken it off to fiddle with something while wrapping presents last year
You haven't steered me wrong....yet!
So, if I have to choose between RM2 and another Chalice III, should I go for the Chalice III?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I was pretty sure it was you that posted that trick first - thanks!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
You haven't steered me wrong....yet!
If you like the Chalice III, you will likely enjoy the RM2 very, very much
The "Triangle" which MAY have been from Empire Mods - I know they sold them , but I don't think there are any around any more.
There are other "triangle" atties - this is the one that's brass with a ceramic deck...
There are other "triangle" atties - this is the one that's brass with a ceramic deck...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Never heard of the TriangleNutty Buddy
I forgot, something old school for sure
Sorry Train...didn't see your response, guess Juice is correct....Nutty Buddy.....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Sorry Train...didn't see your response, guess Juice is correct....Nutty Buddy.....
It's nothing like a Derringer.
It is a dual coil, 3 post thing. Rob removes one post to make the drain hole
Sent from my LG-H815 using Tapatalk