Become a Patron!

Squonkers are Bonkers

Train

Gold Contributor
Member For 5 Years
Oh, I caved too, for Psyclone...But I like a bit more air than Hadaly or Entheon...decided to give a "final closeout" Kryten a shot - for $19.50. Will report back if it happens to not suck...

upload_2018-11-25_8-54-1.png


You all may of seen it...

View attachment 124986

$60 from Psyclone Mods direct.

add in the Ultem or black cap and you pay $0.30 less than the RSA alone not on sale.


Cheers!
You caved <3 - I almost caved
 

Train

Gold Contributor
Member For 5 Years
Oh dang - I think I missed that you could do that.
Oh well... $20 for a top-notch high quality "authentic" - I'm OK with that.
It looks to be a dual-coil only, geared towards big coils and kind of a cloud-chucker - but I'll see if I can make it work with my simple wire mechs. Maybe...maybe not. It might have to be relegated to a regulated - which means I'd have 2 good rdas for only one mod. Uh-oh. Might need a Pico Squeeze 2 if that happens. And around she goes.



Did you add the discount code to take it even lower than $19?

View attachment 124988

$15.60 ;)
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Actually I didn't ;)

I don't think I'll budge from the Chi-NarDa as my forever RSA...unless an authentic falls in my lap lol

The thrill of the chase...
 

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
You all may of seen it...

View attachment 124986

$60 from Psyclone Mods direct.

add in the Ultem or black cap and you pay $0.30 less than the RSA alone not on sale.


Cheers!

* looks at the page * *sniff, sniff* I need to dust upstairs again. :cry: I'm not crying honest.

I don't think I'll budge from the Chi-NarDa as my forever RSA...unless an authentic falls in my lap lol

Chi-NarDa, Gorge, Wasp, Dead Wabbit SQ for me & I think the Gorge is nudging the Chi-NarDa out of top spot. Although I might be wrong, lemme go build a Chi-NarDa to use today. ;) :)

Bah! Too early. Chi-NarDa was seeming too much MTL. I've gotten used to chuffies. The Wasp has a small output as well, yet I can DL off of it just from how it's designed.
 
Last edited:

Train

Gold Contributor
Member For 5 Years
Kryten arrived...
Built it with some claptons I had ready, then took them out before even wicking. I could tell from the heat-up with a 1-battery mech that it wasn't going to achieve the vape I like. Now it's built with SS spaced single-wire duals, at about 0.4 ohms. A decent compromise coil (balancing resistance and mass).

And it's nice. Very well made of course. It actually, to me, vapes pretty much like an original Goon... More air than anyone needs, could easily be a cloud-chucker, but still pretty decent flavor. Good clean look - running on my Arkon, which frees up my one Ti Flave, possibly my very favorite atty, for another mod. Haven't decided which.

Kryten on Arkon - sounds like something from Superman...kryten-arkon.jpg
 

~Don~

Platinum Contributor
Member For 5 Years
So my drip tips and SXK Citadel arrived...did a test draw on it with the AF almost shut...airy.

Into the ultrasonic cleaner for 10 passes... I'll slap a build in it, should help with the abundance of AF it has now ;)
 

chohan

Silver Contributor
Member For 4 Years
It must be Citadel clone day. I received my yftk version today also. Might not get to throw a build in until tomorrow though, very hectic around here.
 

~Don~

Platinum Contributor
Member For 5 Years
Not going to lie, it's pretty good

Even for the clone I can crank down on the screws without worry, grabbed the simple 28/40 3mm 6 wrap fused claptons and the air flow is acceptable when 1/4ish open.

It's quieter than a Haku for sure, almost as quiet as a Skyfall, although air flow is much more smoother in the SF...which is one of the things I dislike about the SF.

Even after a few runs I can taste a hint of residual machine oil, so I'll be tearing it down again and run it a few more times.

0fb06419a262c4d376646dc45ec5a196.jpg
84ad4e30c890767b78d1781a057e612a.jpg


But is it worth the $75.50 Don?

No, I don't think so. If it's still available at $60 sure why not.

I have a few things I'll add about it in a few...typing on the phone takes to much effort


Sent from my iPhone using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Anyway, the things I noticed when I was building it... and this really could just be my Klein side cutters are nearing their end life in sharpness...but leaving the leads long and snipping them after... one can't truly get it flush cut...


I normally pre-cut the length of the legs, so this can be a non-issue really.

The Picture above with how far I have the AF turned down... that is as far as you can take it before it turns to the Ultem do dad, which really doesn't block off air... if they would of made this as a single centered AF cyclops I think I would own multiples...but it is what it is.

If you use the Ultem do-hicky-ma-bob...you will want to run legs down, what this will do for you is put tension on the coil to maintain its circumference when you put the coil LOW...if you do legs up...odds are you will deform your coil and have chicken legs.

I didn't notice much difference with the Ultem do-dad and not...there was a slight warmth increase, but its not a huge deal.


I will say this though... I like it more than I liked my Haku's, but I don't think its better than the Chi-NarDa for the way I like to vape. If the draw on this could get tighter, I'd buy an authentic in a heart beat.


I think this RSA will be right up some of you's alley with how the Air Flow is, for me, its a tad to airy and to bad too ( for me lol )

If Psyclone mods would of done a single air slot rather than keep with the design of dual as the Entheon/Hadaly, I really think this thing would be almost perfect.


This truly just my quick thoughts of it. YMMV
 

~Don~

Platinum Contributor
Member For 5 Years
Well after a few hours and it being cleaned fully...I set it aside and back with the NarDa...

Was monitor licking at some knives when a thought came to me... completely unrelated to knives too lol...

Every time I took a toot, I said to myself, "Fuck wish the draw was a tad tighter"... then the AWWW of Epiphany happened...I'll toss in a larger coil maybe a 3.5mm or 4mm, eat up that extra area in the deck.

But it will have to wait til tomorrow... to dark now and my blind ass can't see... its funny, I wear big ass readers like Milton Waddams in Office Space when doing coils

upload_2018-11-27_18-35-21.png
 

John C

VU Donator
Silver Contributor
Member For 4 Years
If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
I really liked the Hotcig RSQ when I had it. It had a metal body which puts it over the Pulse, IMHO. The chip performs well and waterproof too.
Only downside is that the paint tends to chip (get the silver one to solve that ) and they don't have door options like the Pulse.

Sent from the Death Star
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
Ahh but both pulse squink mods have reported issues.
Leakage with the regulated one and severe voltage drop with the mech one.

I use the Pico Squeeze unregulated mod and a Wasp Nano atty.
 

Train

Gold Contributor
Member For 5 Years
Pico Squeeze 2.

HCigar VT Inbox maybe, and many like the Luxotic.
Haven't seen much feedback, but the Wotofo Recurve looks nifty.


Pulse is popular...so is McDonalds.
upload_2018-11-28_8-17-32.png

If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
Topside all the way
887c928f2af430633fc6963ecd6bf74a.jpg


Sent from my LM-Q610(FGN) using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Decided to revisit my Hussar clone. Threw a build on it when I first got it, decided I didn't like it, and drawered it.
Glad I brought it back out to tinker! Great flavor, great restricted lung hit with smooth airflow.
I put it on my ohm reader with the old build and it measured at 0.23! Wtf was I thinking with the size of the chamber and the airflow?! *facepalm*
Put in a Ni80 28/36 fused clapton, 2.5mm ID,
7 wraps. Comes out to 0.49 ohms and it's damn near perfect for me wide open.
Sounds like a So619Cal vape to me!
57a115e5aafd97561a3687ad69860d52.jpg
2e11d476e295e4589e784d8e0c2d9f62.jpg


Sent from the Death Star
 
Last edited:

~Don~

Platinum Contributor
Member For 5 Years
Decided to revisit my Hussar clone. Threw a build on it when I first got it, decided I didn't like it, and drawered it.
Glad I brought it back out to tinker! Great flavor, great restricted lung hit with smooth airflow.
I put it on my ohm reader with the old build and it measured at 0.23! Wtf was I thinking with the size of the chamber and the airflow?! *facepalm*
Put in a Ni80 28/36 fused clapton, 2.5mm ID,
7 wraps. Comes out to 0.49 ohms and it's damn near perfect for me wide open.
Sounds like a SoCal319 vape to me!
57a115e5aafd97561a3687ad69860d52.jpg
2e11d476e295e4589e784d8e0c2d9f62.jpg


Sent from the Death Star

pretty darn close to my liking ;)
 

jasonandsarah

Gold Contributor
Member For 3 Years
Thinking about trading the 67 for a dna 250 tug what do you guys think? This pic doesn't show the branding but.....
4c1dcbb54a2825c0645da288bd1e49ca.jpg


Sent from my SM-N960U using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
I got rid of all his mods...although I really did like the Neo Mara, but yeah fuck him and his shit


Sent from my iPhone using Tapatalk
He has a new 18350 mosfet squonk that admittedly looks tits, but alas... this sir wont be contributing to his bank account or his overblown and fragile ego.
I look forward to seeing him in Vape Court some day!

Sent from the Death Star
 

~Don~

Platinum Contributor
Member For 5 Years
He has a new 18350 mosfet squonk that admittedly looks tits, but alas... this sir wont be contributing to his bank account or his overblown and fragile ego.
I look forward to seeing him in Vape Court some day!

Sent from the Death Star

I saw on his FB page a while back announcing his partnership with Stimy Vapor...Chinese company that supplied the shit parts to the NeoFet, and so many people lauding the decision. Fucking joker.






Sent from my iPhone using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
I saw on his FB page a while back announcing his partnership with Stimy Vapor...Chinese company that supplied the shit parts to the NeoFet, and so many people lauding the decision. Fucking joker.






Sent from my iPhone using Tapatalk
I'm going to laugh my ass off when I see his "cloned" products on Fasttech while he's crying about how they fucked him over!

Sent from the Death Star
 

~Don~

Platinum Contributor
Member For 5 Years
I'm so Evil...went to make coffee and wanted to use some regular Nestle Creamer, was out of it...drinking it black btw...anyhoo, so I decide, fuck it, make a sammich...fuck out of bread...OK we got this...make a simple tortilla snack and heat up some chili...yup you guessed it, out of that shit too.

Raining cats and dogs here today, so my lazy ass thinks...hey AMAZON!

upload_2018-11-29_13-41-51.png

Figured why get wet, when someone else can lol

2ca6b9c03aba44d97e3a76eec6a23a5a.jpg


Squonk for relevance
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Sorry JL, didn't mean to tempt you but figured "better y'all than me". I even passed on the Odis 40% off sale.....

Eh, I'll pass - I too made it through all that mess last weekend - but barely

Always wanted one of those ultem Big Apple - but I've never liked DNA that much - I only use wattage mode anyways
 

~Don~

Platinum Contributor
Member For 5 Years
I didn't make it through the sales...bought 2 knives

Needless to say, could of bought another Palm 75


Sent from my iPhone using Tapatalk
 

Papachaz

Silver Contributor
Member For 2 Years
Twenty five dollar Black Friday purchase. Only thing I bought by the way. I gave my pulse to my stepson and I wasn’t going to replace it but......... twenty five bucks for both. I’m so weak.
bb953711034bcc2a656b59eac8708316.jpg
01e32f40297b7d9ec9b1ee244d1f255a.jpg



Carpe Nidor
 
Last edited:

BrewBear

Platinum Contributor
Member For 4 Years
I only bought consumables (pods for the Orion, three packs total).......well, that and another SXKUSBBB to replace the one I don't have time to fiddle with right now. Looked at the Topside, considered the Pico2, drooled over a Marfione custom MSG2 (way above my pay grade) and a Benchmade 3320 Pagan Automatic (still above my budget, besides they don't ship them toys to CA), got a glass or three of mead, called it a day!
 

snake94115

Diamond Contributor
Member For 4 Years
@snake94115 , Oi mate, I just ordered some of that Choc Full O' Nuts.
I shouldn't be too hard to please after the stuff my wife buys. cheers
Where'd you order from?
Hopefully you'll like it as much as I do.
Plus knowing that Jackie Robinson was the vice president of the company is kind of cool.
 

snake94115

Diamond Contributor
Member For 4 Years
Admitting a wrong, I was wrong about Kanthal not adding flavor. I swapped from a Kanthal coil to a NiC80 one and this time can tell a difference. NiC80 is real clean.
It's odd some people seem to get a weird taste from kanthal or NiC80.
I've never had issues with either.
 

snake94115

Diamond Contributor
Member For 4 Years
If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
(Vape Don't Smoke) did a series on cheap setups about a year ago.
Here's part 1 below.

 

snake94115

Diamond Contributor
Member For 4 Years
Ahh but both pulse squink mods have reported issues.
Leakage with the regulated one and severe voltage drop with the mech one.

I use the Pico Squeeze unregulated mod and a Wasp Nano atty.
Great combo but my black wasp sits atop my black wraith.And I'm happy with that setup.
 

BrewBear

Platinum Contributor
Member For 4 Years
Probably the cheapest setup would be the Pico Squeeze with the RDA of your choice. Pico (not the 2) is the missing link (not anymore) between mech and regulated in that it has a chip and protects you but you have to build your coils accordingly. I think somewhere around 0.4 -0.5 ohms is what most of us like. You might want to check with @CrazyChef v2.0 , I believe he's closing shop (sadly) and you might find something worth your time. Speaking for myself, the Therion 75C with replay is a good one to get.
If I were to join your hallowed ranks as a newbie squonker, can you guys recommend the mod to get right now? Regulated, battery type not important, single or dual. Just something decent quality. It seems the popular choice for budget is the pulse kit/mod.
 

BrewBear

Platinum Contributor
Member For 4 Years
I'd say you are 'very' restricted DL but at 1.2mm on the air hole, you "could" mtl the draw. Sort of like what Cromwell says.

For me, the perfect mtl draw gives me at least 2-3 seconds to fill my mouth before stage two, drawing into my lungs. 1.2mm on the air hole is about perfect but after which the stage one gets too short. Filling my mouth in 1 second, defeats the purpose... might as well DL.

Speaking of which, I too ordered a Citadel clone to try on the DL side. For the mtl contest: a Etna, Ammit and Cthulha 1928 incoming. My hope is on the cthulha for a proper mtl vape since it reminds me of a kafun deck but who knows.

For now, the krma still has dl duty and for mtl the cyclone v1 is still reigning supreme on the reos.
Waiting to read your impressions on the MTL rda stuff.
 

John C

VU Donator
Silver Contributor
Member For 4 Years
Thanks for all the replies to my "which squonk mod/kit to buy!" -- not necessarily looking for cheapest (I think my post came across that way) -- I'm looking more for quality and usability. Also, you know, a mod that won't break after 3 days usage and a small leak (I'm looking at you, vaporesso armour pro). I was looking at that topfill unit, too, so that one looks interesting and a possibility.
 

VU Sponsors

Top