I would much prefer a 22mm with a 2 ml tank, the 16 mm is a bit tall.Not to further enable you, but there's a 16mm authentic Dvarw being released on Monday at 8am and another drop at 2pm on the KHW site.
Sent from the Death Star
I would much prefer a 22mm with a 2 ml tank, the 16 mm is a bit tall.Not to further enable you, but there's a 16mm authentic Dvarw being released on Monday at 8am and another drop at 2pm on the KHW site.
Sent from the Death Star
I would much prefer a 22mm with a 2 ml tank, the 16 mm is a bit tall.
Guys, im leaning towards the ever-popular topside squonk mod and pairing it with a wotofo profile 24 mm rda. I have trepidation on the profile because even though I have never used a mesh setup before, I have seen past mesh-based setups have mixed-to-very poor reviews. However I see so much love for this new RDA, the profile, that I'm thinking of giving it the old college try. Although his shtick is annoying at times, Rip trippers seems to love the thing and it has nearly perfect reviews everywhere i see it for sale.
This will be my first foray into your dark and lovely world.
For the purposes of this squonk I'll be buying, I'll be using it for lung hits. I never consider myself a cloud chucker, as I go for flavor, but this is def not for MTL or tootle puffs. I'm leaning towards the topside/topfill (whatever its called -- I did see a review on it)...but I just want something that wont break for a while.
The Topside and Profile are a great combination ...
Thanks for this, however they are mech arent they? I just have never had the desire to go outside of regulated. I enjoy not worrying about screwing something up in ways that a regulated mod would simply give a nice error msg and prevent from happening.I still nominate Coppervape mods. ...
Thanks, good post -- do you use TC in that combo? I have always assumed squonking is best with TC to prevent dry hits if you forget to squonk, perhaps. I tried TC back maybe 3 years ago when it was mainly nickel -- bleecchh -- tasted nasty for the first couple dozen hits. So if I use TC this would be my first TC venture as well. I have gone through and currently use probably 10-12 mods, but never have I used TC other than once or twice as mentioned above.
Good point on the kanthal. Its fine, I'm in no hurry to TC anyway.I squonk before each vape so I don't really worry about dry hits. The included mesh strips that come with the Profile are Kanthal so you won't be able to use TC on those. You will have to get TC compatible mesh strips separately. If you plan on using TC with the Topside you will have to download the TC firmware from Dovopo's website since the default firmware only does Wattage or bypass mode from the factory.
I have the profile on my Topside squonk as well. Great comboGuys, im leaning towards the ever-popular topside squonk mod and pairing it with a wotofo profile 24 mm rda. I have trepidation on the profile because even though I have never used a mesh setup before, I have seen past mesh-based setups have mixed-to-very poor reviews. However I see so much love for this new RDA, the profile, that I'm thinking of giving it the old college try. Although his shtick is annoying at times, Rip trippers seems to love the thing and it has nearly perfect reviews everywhere i see it for sale.
This will be my first foray into your dark and lovely world.
Just curious what you disliked so much on the Galaxies. Was it the RTA or the RDA/RDTA?I'd give Galaxies a pass, I had one I used for about 5 minutes (4 minutes was making and installing the coil)
I use a Profile on a Topside as well Using Vandy Vape ss316L 200 mesh cut to size in TC, To be honest it works great in TC (50w@420-480f) or Power mode (45-55w). I have had a few dry hits using the Profile it usually happens when the bottle is getting low on juice. I think it has a lot to do with amount of cotton used to wick it. I have found that when doing a new build I cut about 1/4 of the cotton off lengthwise and then wick. Also cut your ends at an inward slope towards the coil. You have to play with it a bit to get it just right. If using TC you might have to change up the temps to find the sweet spot for the juice you are using. I have had juice good at 400 all the way up to 530f.Thanks, good post -- do you use TC in that combo? I have always assumed squonking is best with TC to prevent dry hits if you forget to squonk, perhaps. I tried TC back maybe 3 years ago when it was mainly nickel -- bleecchh -- tasted nasty for the first couple dozen hits. So if I use TC this would be my first TC venture as well. I have gone through and currently use probably 10-12 mods, but never have I used TC other than once or twice as mentioned above.
What ohm reading are you getting with the SS mesh?I have some of the VV mesh coming to try out in my profile,so just curious what that small little piece comes out.I use a Profile on a Topside as well Using Vandy Vape ss316L 200 mesh cut to size in TC,
0.20ohm is what I have in there now, but it's a notched piece. As the VV mesh is wider you either have to notch it to fit in the clamps or cut it length wise to the same dimensions as the A1 mesh. I've done it both ways but I like the notched wider piece as its almost double the surface area. Just FYI the VV mesh is very springy and won't take a shape like the Kanthal mesh does. What I do is, cut to length then notch both ends to fit in the clamps, clamp one side, then lay the tool over the ceramic piece then bend the mesh over it and into the other clamp. Be careful when wicking as the cotton wants to grab the side of the mesh and you can distort the shape very quickly. If using VV mesh cut to exact size, be sure to wick it from the uncut side of the mesh, The cut side will be rough and won't let the cotton slide through.What ohm reading are you getting with the SS mesh?I have some of the VV mesh coming to try out in my profile,so just curious what that small little piece comes out.
Cool,thanks for the tips.I had wondered about notching it like that,so glad to hear that works,and that it ohms out around a .2,i really didn't want to go much lower than the kanthal strips come out at since 1 of my profiles i run on a mech,but i have been using only SS wire for several years,so definitely wanted to give the SS mesh a try,so now i know it'll be right where i want it.0.20ohm is what I have in there now, but it's a notched piece. As the VV mesh is wider you either have to notch it to fit in the clamps or cut it length wise to the same dimensions as the A1 mesh. I've done it both ways but I like the notched wider piece as its almost double the surface area. Just FYI the VV mesh is very springy and won't take a shape like the Kanthal mesh does. What I do is, cut to length then notch both ends to fit in the clamps, clamp one side, then lay the tool over the ceramic piece then bend the mesh over it and into the other clamp. Be careful when wicking as the cotton wants to grab the side of the mesh and you can distort the shape very quickly. If using VV mesh cut to exact size, be sure to wick it from the uncut side of the mesh, The cut side will be rough and won't let the cotton slide through.
It was the RDA, I believe the chamber was large and it gave a "hollow" vape. It felt like there was a bit more air than needed even with the AF closed. I didn't much care for it. I think the real problem lies with them trying to have an RDA that covers both MTL and DL. It had deep a well as well, not a bonus when squonking, but still, it was better than the Berserker MTL RDA.Just curious what you disliked so much on the Galaxies. Was it the RTA or the RDA/RDTA?
I might be enabled on that Dvarw as well, the cart is calling my name....
That SVB is gorgeous. Love the finishes that Nigel produces! Wish I could just get a dual 18650 parallel from him...Toodlepuffing is growing on me.
Sent from my LG-D850 using Tapatalk
I have the RDTA version and that seems to describe what that "something" is I don't like about it. No other mtl rsa to compare it to, only been in that rabbit hole for a few months. I'm on the hunt for a reason, just don't know what for. I like a dense, concentrated vape and have resigned myself to the fact that I'm going to have to burn through some hardware to find it.I believe the chamber was large and it gave a "hollow" vape.
He's got one up tonight I think or it was last nightThat SVB is gorgeous. Love the finishes that Nigel produces! Wish I could just get a dual 18650 parallel from him...
Sent from the Death Star
Saw that. Gorgeous mod but I want a non-Squonk lolHe's got one up tonight I think or it was last night
Sent from my LG-D850 using Tapatalk
Saw that. Gorgeous mod but I want a non-Squonk lol
Sent from the Death Star
Sorry, I don't know what I was thinking...
... they are mech arent they?
For a tobacco lover as myself, tobaccos (NETs and synthetic) are why tootlepuffing has stayed alive for me. I just can't take a big ole lung hit of a tobacco, just feels weird and tastes odd to me.Toodlepuffing is growing on me....
For a tobacco lover as myself, tobaccos (NETs and synthetic) are why tootlepuffing has stayed alive for me. I just can't take a big ole lung hit of a tobacco, just feels weird and tastes odd to me.
And thanks to the Juicy One, I tootlepuff primarily on a snapdragonI am a incorrigible tootle puffer also, lol
hi geneIt's time for some new batteries, so what's the latest bestest 18650 out there? And where to order from?
I like that damn Topside so much I gotta buy another....damn good squonker. I have about 45 other (had to have squonks) which are nowhere near the quality and ease of use as the topside.
I just ordered a basium. Same chip (but upscaled) as topside. Without the ridiculous hole placement or top fill.
$47 usd in your terms including shipping
Yep. Have a refill bottle.Its a pretty decent mod...doesn't get great battery life considering its dual.
I suggest if you have a refill bottle to use that...removing said bottle system although easy, is messy as with most when refitting it.
One downside of the Basium...long pin atomizers will cause the bottle system to not go in flush, and said brick will teeter on a desk.
He's going to stop making them?Just an FYI, US Modz is doing their very last list for their 2x700 Stinger (he'll still be doing 18650 ones) . He's offering your choice of custom acrylic and hybrid stab wood for $250 plus shipping. Here's mine in caee anyone is curious as to what they look like.
Sent from the Death Star
Just the 2x700 version. He'll still be making the Mini Stingers though.He's going to stop making them?
Sent from my LG-D850 using Tapatalk
No he was very clear that it wouldn't be a DNA Go. He said that they don't sell the Go boards like they do the 75C, 250C, etc. You have to get approved and it's only for mass production, basically.dnaGO?
interesting
Interesting...No he was very clear that it wouldn't be a DNA Go. He said that they don't sell the Go boards like they do the 75C, 250C, etc. You have to get approved and it's only for mass production, basically.
Sent from the Death Star
Didn't realize you were a member of the group!Interesting...
Just joinedDidn't realize you were a member of the group!
Sent from the Death Star
I prefer my black wasp with a drip-tip.Otherwise it just gets too hot to handle.I'm going to give credit where credit is due here.It was @The Cromwell that gave me that hint.And I'll freely admit he is 1000% correct that without the drip-tip it just didn't work out for me at least.Enjoying the tail piping of a Wasp Nano today. Think I've decided imho at least, tail piping is how this RDA is meant to be used.
I got to try 1 of those Vapefly Galaxies and although I wasn't super impressed I wouldn't say it was a total loser either.Just not my cup of tea.I'd give Galaxies a pass, I had one I used for about 5 minutes (4 minutes was making and installing the coil)
After using the tiny 2 those sound huge. The stingers.Just the 2x700 version. Hell still be making the Mini Stingers though.
Freddy seems to be branching out lately with a dual 18650 DNA 250C and just hinted about a pod system.
Sent from the Death Star
Yeah they're definitely big compared to the mechs, but mine stays home and I usually vape it with my morning coffee.After using the tiny 2 those sound huge. The stingers.
Sent from my LG-D850 using Tapatalk
Then just a Pico Squeeze V1 and a Wasp Nano.It shouldn't cost more than $35 for both.For the purposes of this squonk I'll be buying, I'll be using it for lung hits. I never consider myself a cloud chucker, as I go for flavor, but this is def not for MTL or tootle puffs. I'm leaning towards the topside/topfill (whatever its called -- I did see a review on it)...but I just want something that wont break for a while.