Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
I enjoy my Hugo BF mech more than the Eleaf Pico Squeeze 2, Vandy Vape 80w BF and the Dovpo Topside. Cannot wait to try out the MCM Underground SSSP.
Wow that will be one transition of mods for the ages...
Go from a VWBug>Civic>Toyota Camry>Lambo
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
New (to me) Reo P67! Always wanted one and it certainly lives up to its reputation thus far. Had to put a Basic 1.1 on it, of course.
Sent from the Death Star
Glad you ended up with it - I've got a few and was almost tempted - the price was certainly right
Plus, everyone needs at least one indestructible squonker
Freaking bombproof, I tell ya!Glad you ended up with it - I've got a few and was almost tempted - the price was certainly right
Plus, everyone needs at least one indestructible squonker
Honestly though, I almost passed on it. I've been contemplating doing another Shapeways DIY mod but decided the money would be better spent on this
Sent from the Death Star
I like them Spiderco knives too.....I remember buying a couple at a gun show way back when we still had balls in California and gun shows were still allowed. I think I payed $20 a piece back then, they were just breaking into the market.
Can the https://www.fasttech.com/products/1/10055217/9684086-authentic-lost-vape-drone-200w-dna250c-tc-vw be tuned to imitate a mech?
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Freaking bombproof, I tell ya!
Honestly though, I almost passed on it. I've been contemplating doing another Shapeways DIY mod but decided the money would be better spent on this
Sent from the Death Star
There is a reason they were the gold standard for so long - I think they still deserve a spot
@JuicyLucy, care for a great clone? https://www.fasttech.com/products/3041/10058149/9678126-yftk-typhoon-btd-wave-styled-rda-rebuildable
15% off, coupon code: XMAS2018
https://www.fasttech.com/products/3041/10058149/9678126-yftk-typhoon-btd-wave-styled-rda-rebuildable15% off, coupon code: XMAS2018
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
@JuicyLucy, care for a great clone?
15% off, coupon code: XMAS2018
Mmm - don't know. Haven't bought a double coil attie in forever - not seeing a reducer
If they got the air right it might be something - did anyone here ever try it?
Yeah I still have an original stainless serrated spidey lock back from ages ago... I was going to order a Benchmade 940-1 mainly for the S90V then when doing my rounds at the main knife retailers low and behold the 204P was back...prefer Spydercos, that and it was only $150 compared to $270
Well I lied, the knife was $149.95 with free shipping and of course had to buy a deep carry lynch clip ($25)
Sent from my iPhone using Tapatalk
Not me, was interested in it though, but never pulled the trigger (to busy drooling on knives lately)
Sent from my iPhone using Tapatalk
It's a single coil 22mm atty, right in your alley, I guess.
It hasn't got the plastic reducer thingy the Citadel has right. I highly recommend the YFTK Citadel Clone by the way.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
It's a single coil 22mm atty, right in your alley, I guess.
I might go for a Citadel - but I'll get a real one
I would like too, but it's $102 here...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
These guys must be on cr*ck
Five bucks for five Orings from China for an attie I paid like $8 for
Wasp Nano RDA Replacement O Rings Sealing in Stock Now
Five bucks for five Orings from China for an attie I paid like $8 for
Wasp Nano RDA Replacement O Rings Sealing in Stock Now
LOL! My wife gave me the stink eye!
Honestly, it is not my fault she decided to fast the week before Christmas and I just took some pork riblets and two racks of baby back ribs out of the smoker. A guy's gotta eat, right? Besides, she should know better. I am very supportive throughout the year, but at Christmas time all bets are off!
Honestly, it is not my fault she decided to fast the week before Christmas and I just took some pork riblets and two racks of baby back ribs out of the smoker. A guy's gotta eat, right? Besides, she should know better. I am very supportive throughout the year, but at Christmas time all bets are off!
More like they were vaping b*ng water!These guys must be on cr*ck
Five bucks for five Orings from China for an attie I paid like $8 for
Wasp Nano RDA Replacement O Rings Sealing in Stock Now
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
LOL! My wife gave me the stink eye!
Honestly, it is not my fault she decided to fast the week before Christmas and I just took some pork riblets and two racks of baby back ribs out of the smoker. A guy's gotta eat, right? Besides, she should know better. I am very supportive throughout the year, but at Christmas time all bets are off!
I did a juice fast last week - now Mr Juicy is in dental hell and can't eat much, and I'm making him juice too
Please tell him he has my heartfelt sympathy! If they ever decide to put me on a strict diet, they might as well shoot me (unless there is plenty of mead at hand, then I'll survive).I did a juice fast last week - now Mr Juicy is in dental hell and can't eat much, and I'm making him juice too
Speaking from experience, I'd say you should listen to JL, the lady knows her stuff.Thanks, maybe I should.
I believe you!
Anyway, it wont arrive before Christmas. I'll have to do with the authentic Goon 25mm this Christmas. I hope all the short fills and nic shots I have ordered from the UK will arrive today (20th).
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I believe you!
You can never go wrong with a Goon
It has to do with the max voltage or something like that, I'm not too sure. I can tell you the colored screen DNA boards (75 and 250) have "Replay" and I really like that feature. Not only that, but the 250C can go to 300W with three cells and 400W with four cells, both replay and wattage increase are blocked in the US but are available with the international version of escribe.
Not so much that for me. As I said above, the C boards battery saving makes them make me want to slash my wrists
Love my 250c.
Eugenol oil, clove oil. It's American red Cross brand. Or in a pinch pole a hole in an Advil liquid gel and rub some of the stuff on tooth or gum. It will get hot on the gums. But it definitely works. If abcessed cold packs, ibuprofen and swishing with peroxide helps. I'm the tooth fairies nightmare and an oral surgeon dream.I did a juice fast last week - now Mr Juicy is in dental hell and can't eat much, and I'm making him juice too
Sent from my LM-Q610(FGN) using Tapatalk
Last edited:
I'm sure you do. But his question wasn't about that. It was whether they mimic a mech
Well that covered it hahahaha!
Sent from the Death Star
@mt01631 Just saw all this and wanted to make sure you didn't miss it
Sent from my SM-N960U using Tapatalk
No MCM SSSP for me this Christmas. Received a very well used one. At least I was sent a new bottle for it... Going back!
Edit: What do you think? I was told it's new.
I see it's normal after talking with customer service, and they even offered me to keep the ulton one, instead of the black I ordered, even though it costs more.
Edit: What do you think? I was told it's new.
I see it's normal after talking with customer service, and they even offered me to keep the ulton one, instead of the black I ordered, even though it costs more.
Last edited:
Well I got my Profile. Actually, my first, as I ordered a second one before I had the first.
That was probably a mistake - as I have determined quite quickly that it's not gonna work for me on my mech squonkers.
I got it to use the mesh coils, and they're 0.18 ohms. If anyone knows of any mesh I could (fairly easily) throw in a Profile that runs more like 0.3 and up, please let me know. Because as I've found before - I can't vape below about 0.3. It's just too "hot" for a mech and the way I draw.
I have now experienced a hint of a mesh dry hit, and that's no good at all.
So I moved the Profile to my solitary regulated device - and it's vaping quite nicely there!
But I won't need the blue one that's en route. :-(
Also, that required some real topper swapping. I've not got a (also quite nice) QP Kali on my OG mech Pulse...which is weird. SEEMS like a mismatch, but...well...they're both really BIG, and again - it's vaping quite nicely.
These are now sort of my cloud-chucker setups.
The Profile does have plenty of air - which I was concerned about having seen the little hole pattern, reminding me of the Recurve, on which I don't like how restricted the intake is. Profile is somehow FAR more air - probably because INSIDE those holes, there's no restriction at all.
So - the Profile has a lot going for it:
Pico for sizing...
That was probably a mistake - as I have determined quite quickly that it's not gonna work for me on my mech squonkers.
I got it to use the mesh coils, and they're 0.18 ohms. If anyone knows of any mesh I could (fairly easily) throw in a Profile that runs more like 0.3 and up, please let me know. Because as I've found before - I can't vape below about 0.3. It's just too "hot" for a mech and the way I draw.
I have now experienced a hint of a mesh dry hit, and that's no good at all.
So I moved the Profile to my solitary regulated device - and it's vaping quite nicely there!
But I won't need the blue one that's en route. :-(
Also, that required some real topper swapping. I've not got a (also quite nice) QP Kali on my OG mech Pulse...which is weird. SEEMS like a mismatch, but...well...they're both really BIG, and again - it's vaping quite nicely.
These are now sort of my cloud-chucker setups.
The Profile does have plenty of air - which I was concerned about having seen the little hole pattern, reminding me of the Recurve, on which I don't like how restricted the intake is. Profile is somehow FAR more air - probably because INSIDE those holes, there's no restriction at all.
So - the Profile has a lot going for it:
- Easy to mount those precut mesh coils.
- You CAN see the squonk, seeping through to the coil, despite being wicked with literally 5 times the cotton I'd use in anything else.
- It's so far, surprisingly good flavor, nice dense vapor...
- Plenty of air for me (running it wide open), and easy to adjust down.
Pico for sizing...
I hate admitting it but I agree. Well designed and executed. A bit pricey considering it's mass produced though.
Apparently they're available in anodized aluminum and will be in stab wood too. No matter. Ol Butternuts won't be getting a dime from me.
Sent from the Death Star
They are supercute. I like the anodized blue, or just polished alum better than the ultem. Might even get one, just not direct...
Besides other concerns, it'd like $40 to ship a $150 mod...nope.
Besides other concerns, it'd like $40 to ship a $150 mod...nope.
Besides, if they are mass produced, they are made in China and that means a "similar " mod will pop up on their websites within the month for a whole lot less.
Well that POS has the exact same Mosfet that was in the Gooberfet...but at least the fet will perform slightly better due to the fact its attached to an 18350... forcing people to build to its true capability.
I didn't even build low when I had the gooberfet... .45Ω I think was my average coil... and that POS forced me to move to higher gauge wire builds (28/40) due to mass on my normal 26/36 coils being to much for it to handle...seriously the voltage drop was 3.2v on that shit fet on a fresh battery... and only marginally better when I went to less mass...best that fet obtained when I used just plain round N80 was 3.56v.
That mother fucker doesn't care about putting out quality anymore.
And just for comparison... the Pico hits 3.84v on a $17 mod
Correction, 3.02v the first gooberfet I had from him...
Then his mech before I changed it to pure silver contacts...
and that 3.85v is with a .27 fused...that voltage on mech would be near non-existent if I built it .45Ω I would wager 3.98v+
So yeah... eff his POS stuff lol
I didn't even build low when I had the gooberfet... .45Ω I think was my average coil... and that POS forced me to move to higher gauge wire builds (28/40) due to mass on my normal 26/36 coils being to much for it to handle...seriously the voltage drop was 3.2v on that shit fet on a fresh battery... and only marginally better when I went to less mass...best that fet obtained when I used just plain round N80 was 3.56v.
That mother fucker doesn't care about putting out quality anymore.
And just for comparison... the Pico hits 3.84v on a $17 mod
Correction, 3.02v the first gooberfet I had from him...
Then his mech before I changed it to pure silver contacts...
and that 3.85v is with a .27 fused...that voltage on mech would be near non-existent if I built it .45Ω I would wager 3.98v+
So yeah... eff his POS stuff lol
Last edited:
No, really! Don't hold back, tell us how you really feel about mr. Gooberbutternuts and the overpriced crap he sells.
iamadrunkguy
Member For 4 Years
Well I got my Profile. Actually, my first, as I ordered a second one before I had the first.
That was probably a mistake - as I have determined quite quickly that it's not gonna work for me on my mech squonkers.
I got it to use the mesh coils, and they're 0.18 ohms. If anyone knows of any mesh I could (fairly easily) throw in a Profile that runs more like 0.3 and up, please let me know. Because as I've found before - I can't vape below about 0.3. It's just too "hot" for a mech and the way I draw.
I have now experienced a hint of a mesh dry hit, and that's no good at all.
So I moved the Profile to my solitary regulated device - and it's vaping quite nicely there!
But I won't need the blue one that's en route. :-(
Also, that required some real topper swapping. I've not got a (also quite nice) QP Kali on my OG mech Pulse...which is weird. SEEMS like a mismatch, but...well...they're both really BIG, and again - it's vaping quite nicely.
These are now sort of my cloud-chucker setups.
The Profile does have plenty of air - which I was concerned about having seen the little hole pattern, reminding me of the Recurve, on which I don't like how restricted the intake is. Profile is somehow FAR more air - probably because INSIDE those holes, there's no restriction at all.
So - the Profile has a lot going for it:
Only downside: you just can't hit it with 4 volts.
- Easy to mount those precut mesh coils.
- You CAN see the squonk, seeping through to the coil, despite being wicked with literally 5 times the cotton I'd use in anything else.
- It's so far, surprisingly good flavor, nice dense vapor...
- Plenty of air for me (running it wide open), and easy to adjust down.
Pico for sizing...
View attachment 127089
Loving my profile! I'm looking for higher ohm coils as well but cant seem to find any unless I buy the rolls of mesh and try to make my own. I use mine on my Luxotic and it is spectacular. I've also seen weird builds on it with regular wire but havent tried any. I want to get a regulated mod first.
Sad but true. The mosfet in the neofet is garbage. My SVBF, Proteus Malu and Pico run circles around it and for what I paid for it, I could have bought 6 picos, including the price of having every one custom painted by Nigel.
The neofet is the only mod I own but am ashamed to sell (or even give away) because really... am I going to pass that garbage off to someone else.
Not gonna happen.
@Train Although I don't share your fondness for the Profile - the novelty wore off after a week - Vandy Vape has mesh spools in different gauge ss316 and also a kanthal version.
https://m.fasttech.com/products/3033/10040239/8785105-authentic-vandy-vape-kanthal-a1-mesh-wire
It wider so you have to notch the corners to fit in the profile clamps. I only know cutting the stock coils narrower will raise the resistance a bit but not sure if it would get you as high ohm as what you're after.
https://m.fasttech.com/products/3033/10040239/8785105-authentic-vandy-vape-kanthal-a1-mesh-wire
It wider so you have to notch the corners to fit in the profile clamps. I only know cutting the stock coils narrower will raise the resistance a bit but not sure if it would get you as high ohm as what you're after.
@zephyr has one I think