What did you do today that is vape related?

[bikerboogieman]

I learned something during this young vaping journey of mine. Truth be told, I've been struggling with Get Your Kicks juice. It's something that I really want to like as it has the bubble gum flavor that I crave. It has a strange taste to it that I thought was a higher nicotine level than 3mg and very well still may be. When vaping at 45 watts, some hits were harsh and lacked taste, and as I continued to vape, some were better tasting and not as harsh. I thought it may be due to the coil getting hotter after a few hits on it. So I set the watts up to 75 and shazam!!! It now tastes like I hoped it would. Much better bubble gum flavor and almost all the harshness is gone. I'm thinking some juices may need to be vaped at a higher wattage to get the correct flavor profile. I am now very satisfied with Get Your Kicks juice and it will be reordered.

 

[Synphul]

Cleaned my tank and coils, fresh wick. Made an order yesterday for some wire and made use of Lightning Vape's 30% off sale. Ordered some spool tamers off FT that are likely too small for the spools I ordered so thinking about grabbing some elastic from wally world or something. It's cheap enough, then I'll make them longer if needed. Restocked on 26ga and 28ga stainless, 250ft of 36ga and 40ga ni80 to play with, 500ft of 38ga ni80 and some .3x.1 and .4 x.1 ni80 ribbon to give framed staples a whirl. All in all around 1400ft but should do me awhile and saved around $17.

 

[Creature0069]

Wicked up my new to me Dropdead atty and chucked some flavorful couds!

Debating cutting the catch cups off my last remaining woodville and the VV woodville that I repaired last night.

 

[nadalama]

Built and wicked my new-to-me Wasp Nano (thanks @IcepickMaker84 !). Don't like the coil I put in it, was in too much of a hurry and should have just waited until I had more time.

Happy with the RDA, though; this blue resin looks nice with a small tapered drip tip on it.

 

[The Cromwell]

My Wasp Nano dream coil.
3mm id 26 ga SS316l parallel 10 wraps.
Top just slightly above the posts.
Around 24-34 watts.
Works great on a mech sqounker or regulated.

 

[bikerboogieman]

Cleaned a tank, put in a new coil and loaded up the Vaptasia Blueberry Killer Kustard. I'll try it in bit, wish me luck lol.

 

[nadalama]

My Wasp Nano dream coil.
3mm id 26 ga SS316l parallel 10 wraps.
Top just slightly above the posts.
Around 24-34 watts.
Works great on a mech sqounker or regulated.

Well I was close. 24ga N80 parallel, 3mm, 4 double wire wraps came to 0.23 ohms. I have it on a VV Pulse mech now and it's quite happy. I've switched back to CB V2 from rayon, and it's taking a little getting used to.

 

[nadalama]

Cleaned a tank, put in a new coil and loaded up the Vaptasia Blueberry Killer Kustard. I'll try it in bit, wish me luck lol.

Alrighty then! Good luck! (Why do you need luck?)

 

[bikerboogieman]

Alrighty then! Good luck! (Why do you need luck?)

For some reason I seem to be a bit apprehensive when trying new things. Just one of my many messed up qualities I guess...

 

[nadalama]

For some reason I seem to be a bit apprehensive when trying new things. Just one of my many messed up qualities I guess...

Nah, you've fit in here so well, I forget that you're still fairly new to all this. When you start hanging out here, things start to speed up, too (in case you hadn't noticed).

 

[Jinx'd]

researched a new mod. then ordered it.

 

[Vape Fan]

researched a new mod. then ordered it.

Is it a secret mod?

 

[The Cromwell]

Decided I need to order more flavorings when BCF has their 7-4 sale.

 

[Mykreign]

Haven't done much in a few days. Refilled my berserker V1.5 a few times and bought a couple ripstick pods this morning.

I was just telling @BobsHere yesterday that my clouds bro set ups haven't been satisfying me lately. Idk what's going on!

edit: I sometimes daydream about switching to pods and buying juice instead of making it. Living the simple life.

 

[BobsHere]

Haven't done much in a few days. Refilled my berserker V1.5 a few times and bought a couple ripstick pods this morning.

I was just telling @BobsHere yesterday that my clouds bro set ups haven't been satisfying me lately. Idk what's going on!

edit: I sometimes daydream about switching to pods and buying juice instead of making it. Living the simple life.

 

[Mykreign]

huh, just talked to a coworker and he said he's having the same issues. Vape doesn't taste all that great, not satisfying, Slow ramp up times...

Now i'm wondering if its the humidity or allergies screwing with us

 

[wildgypsy70]

huh, just talked to a coworker and he said he's having the same issues. Vape doesn't taste all that great, not satisfying, Slow ramp up times...

Now i'm wondering if its the humidity or allergies screwing with us

Maybe.....I know juice doesn’t seem as bright lately. VA is suuuuuper humid and hot right now.

 

[The Cromwell]

Maybe.....I know juice doesn’t seem as bright lately. VA is suuuuuper humid and hot right now.

Mind control rays emitted by Chinese mods impact the taste of the juice.

 

[Mykreign]

Maybe.....I know juice doesn’t seem as bright lately. VA is suuuuuper humid and hot right now.

Maybe thicker juice would help. Since it get a little runny

Sent from my SM-G950U using Tapatalk

 

[Tornadoalleydeb]

So, when I am gaming on my PC I vape, and the vapor always drifts to right in front of the TV. Hubby is supportive of my vaping so never said anything, but I knew it kinda bugged him. Well I got out my little fan from Liionwholesale and placed it so my vapor now goes behind me instead of towards the TV Works great!

 

[wildgypsy70]

Mind control rays emitted by Chinese mods impact the taste of the juice.

Ohhhhhhhh.....ok. I had no idea.

 

[The Cromwell]

Ohhhhhhhh.....ok. I had no idea.

And why do you think the Chinese love to put leds on their mods?
Subliminal optical mind control

 

[AndriaD]

So, when I am gaming on my PC I vape, and the vapor always drifts to right in front of the TV. Hubby is supportive of my vaping so never said anything, but I knew it kinda bugged him. Well I got out my little fan from Liionwholesale and placed it so my vapor now goes behind me instead of towards the TV Works great!

View attachment 141048

I got one of those fans back at xmas myself. I see that yours is plugged in... do you ever find, when it's unplugged, that it moves itself across whatever surface it's sitting on? Granted, I had the fan on high when I noticed this behavior; it's like it creates a "rocket" effect, pushing itself backward by the forward velocity of the fan!

Andria

 

[Tornadoalleydeb]

I got one of those fans back at xmas myself. I see that yours is plugged in... do you ever find, when it's unplugged, that it moves itself across whatever surface it's sitting on? Granted, I had the fan on high when I noticed this behavior; it's like it creates a "rocket" effect, pushing itself backward by the forward velocity of the fan!

Andria

No, mine has not moved when using the batteries. At least not that I ever noticed

 

[Jinx'd]

Is it a secret mod?

I have one of these coming. I am really worried about the wood = some look really nice, others, Meh.

 

[Vape Fan]

I have one of these coming. I am really worried about the wood = some look really nice, others, Meh.
View attachment 141075

You didn't get a 1 of 1. I too hope you like it. I think I would no matter the color, once I got it shined up to give it that richness, depth. I would like the chip and color interface, same as Lustro w/o the led.

 

[MrMeowgi]

Maybe.....I know juice doesn’t seem as bright lately. VA is suuuuuper humid and hot right now.

Same in NC. Blazing hot. 10pm and still 83 degrees

 

[MrMeowgi]

I have one of these coming. I am really worried about the wood = some look really nice, others, Meh.

View attachment 141075

Manny has his wood thread and will be more than happy to help you polish your wood. Or wait... Lol not like that. You bunch of perverts. Lmao

 

[Jinx'd]

Manny has his wood thread and will be more than happy to help you polish your wood. Or wait... Lol not like that. You bunch of perverts. Lmao

I know, Manny IS the reason I got this, well, and Stabwood is just freak'n AWESOME ! showing off his wood all the time, made me want to get my own wood. but I wanted to keep it inexpencive, so this is it.

 

[MrMeowgi]

I know, Manny IS the reason I got this, well, and Stabwood is just freak'n AWESOME ! showing off his wood all the time, made me want to get my own wood. but I wanted to keep it inexpencive, so this is it.

It's a nice mod. I've looked at them a few times. He tole me what to get for mine. Amazon has a micro pad variety pack. 8000-12000 grit. I forgot what else but he'll fill you in. Definitely knows what he's doing

 

[Jinx'd]

tracking says Thursday. that would be a miracle, and I doubt true. but by Saturday, I'm good.

 

[Tornadoalleydeb]

Same in NC. Blazing hot. 10pm and still 83 degrees

8pm and 97 .....................

 

[The Cromwell]

11 pm and raining...
working towards 8 inches in 4 days...

Took 3 hours for Debs post to get to me?

 

[MrMeowgi]

8pm and 97 .....................

Ouch

 

[AndriaD]

No, mine has not moved when using the batteries. At least not that I ever noticed

Weird. Mine has propelled itself right off my dresser several times. Since I needed to be in the kitchen at the time, I finally just had to turn the silly thing off, so it didn't propel itself onto the floor and, I dunno, start a fire or something, from frontal contact with the carpet.

Andria

 

[AndriaD]

11 pm and raining...
working towards 8 inches in 4 days...

Took 3 hours for Debs post to get to me?

When she said it was 8pm, it was 11:11 EDT time... so apparently she's on the west coast.

Andria

 

[Tornadoalleydeb]

mhmmm Nevada





<<<<<<<name..............lol I guess I should have made my name debinNV Hotter than you know what here

 

[Tornadoalleydeb]

11 pm and raining...
working towards 8 inches in 4 days...

Took 3 hours for Debs post to get to me?

Damn lag..............

 

[DonBaldy]

Awww how cute. 83 degrees is blazing hot.

 

[The Cromwell]

But it is a dry heat.
Try the 83 it got to here today and 80+% humidity.
usually it is at least down to 70% humidity.

 

[DonBaldy]

But it is a dry heat.
Try the 83 it got to here today and 80+% humidity.

 

[The Cromwell]

Swamp coolers just grow toadstools here.

 

[nadalama]

Awww how cute. 83 degrees is blazing hot.

That's at 10 pm. At noon today when I got in my car it was 99 degrees up here.

 

[MyMagicMist]

So far today, just vaped a bit.

Pondering all this heat discussion and recalling soldiers off in places it can get to 120 F in the shade. I just shake my head and hope to stay where I can get a moderate 55 to 75 F with just adequate humidity. Hard to tell anymore how much longer any of us have. I'll just enjoy what I got.

 

[MrMeowgi]

Awww how cute. 83 degrees is blazing hot.

Shhhh. We can't all live in texas

 

[BobsHere]

Hmmm, blazing hot here too, go figure, Bob.....
Now, get off my beach, damn kids.....

 

[MyMagicMist]

Still, can only say I've vaped today. Waiting on mod for review, although not holding my breath. It does allege bullet proof polycarbonate. I was looking forward to testing such a claim. Also waiting on stipend to arrive, and some package from AK scheduled to be here Thursday. Think I'm getting more of a monster than I'm aware. It'll be alright though, sure enough.

 

[MrMeowgi]

Still, can only say I've vaped today. Waiting on mod for review, although not holding my breath. It does allege bullet proof polycarbonate. I was looking forward to testing such a claim. Also waiting on stipend to arrive, and some package from AK scheduled to be here Thursday. Think I'm getting more of a monster than I'm aware. It'll be alright though, sure enough.

I love people from AK. Well not really love but I know the coolest mofo in AK

 

[nadalama]

Took two wraps out of the coil that was in my Reload S clone and put it on a Hive Squonker with Tiramisu Cream in it. Also finally got the air adjusted like I want it. It is much improved!

In the process, though, had to refill the bottle on the Hive, and I must have squeezed on my juice bottle some kinda hard, because next thing I know, the squonk bottle was full UP TO THE TIP TOP and I was about to have a terrible mess.

Updated my "mods and tanks" list since I'd recently gotten some new things and moved a bunch of things around. Have to do that in order to remember the coils and flavors in my atties.

 

[jwill]

Picked up the ball cap I had made for myself and vaped a lot. Made some clapton coils from various bits of scrap wire. Some of it I wasnt sure what the wire was, not planning on vaping it, just practice.

If anyone is in Houston and will be at the expo this weekend, come say hello. Im mostly going to meet some of the people I have been working with and probably buy a bunch of shit I dont need but I do get to hang out with @DonBaldy which is always fun.