Become a Patron!

Whiskey's corner

Status
Not open for further replies.
Boattlebot

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Hottvbuils post: 910374 said:
Most of my series builds ohm out at 0.6

Sent from my XT1526 using Tapatalk
Click to expand...
What kind of builds do you normally do for mechs? I find on my rx i stick more to claptons or clapton styled builds but my mech dosent really like claptons. Best build right now is just 26k wraped loose in flat at 6 wraps at 3mmid.
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
For me I push it, I do series around a 0.5 with 24g at 3mm
For a single batt mech I use 22g at 3mm and nail it right at 0.2 or I use twisted 28 and 24 and get that about 0.23(Ish)


Sent from my iPad using Tapatalk
 
Boattlebot

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
2 strands of 28 twisted with 24 or one strand each? I tried a twisted 28 build and i wraped a little 32 around it. Not a full clapton style wrap but just a little. But it dosent like the mech. I guesse its hard to shake the clapton mode ive been in
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I don't really wanna turn this into a build thread.
I'm not really a trick builder anyway. A good buddy of mine from high school owns a shop and he makes wire. A lot of times he would just give me one of two. Either 24g kanthal wrapped with 28 nichrome. Or braided 2 strands of 30g nichrome with 1 strand of flat 28g kanthal.


Sent from my iPad using Tapatalk
 
Hottvapz

Hottvapz

Gold Contributor
Member For 4 Years
Boattlebot said:
What kind of builds do you normally do for mechs? I find on my rx i stick more to claptons or clapton styled builds but my mech dosent really like claptons. Best build right now is just 26k wraped loose in flat at 6 wraps at 3mmid.
Click to expand...
For my single battery mechs usually a basic bitch 20 or 22g build. My series builds usually claptons

Sent from my XT1526 using Tapatalk
 
Boattlebot

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Never tried nichrome. Maby i will eventualy.


I could get my coils made and they would be awesome but i like the almost endless fiddling of coil building
 
Boattlebot

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
My tables just a mess of random coil building shit and failed and sucsessfull coils thst became mismatxhed becuase of a failed coil..... god i need to clean it up and start getting a decent build station. Sunday im gunna compleatly get this table clean and set up a build station.
 
kimber

kimber

Silver Contributor
Member For 4 Years
Member For 3 Years
Hi everyone! So I've had this cuboid all day and only just now had time to throw the batteries in and give it a try. After about three seconds of use I like it!! It IS a brick however. Freakin heavy!! The Cubis tank is nice too, haven't had a dry hit at all. Like that a lot.
A little disappointing that there were a couple of good scuff marks on the screen right out of the box. How does that happen?? I guess I'm the only one that'll notice them.
DH started enclosing my mixing room in the basement today, pretty excited about that. I'm mixing for a lot of friends and want it as clean as possible in there.
Nice dinner you had there Hank. Bout the only thing a bday is good for is getting a really good dinner that you don't have to cook yourself. In my book anyway.
Duty calls... Later peeps


Sent from my iPhone using Tapatalk
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
boriqua75 said:
Well my ass has been up more than 24 hrs...I'm fried. Finally in bed...goodnight my friends ;)

Vape on
Click to expand...
Goodnight chick!


Sent from my iPad using Tapatalk
 
Hank F. Spankman

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
kimber said:
Hi everyone! So I've had this cuboid all day and only just now had time to throw the batteries in and give it a try. After about three seconds of use I like it!! It IS a brick however. Freakin heavy!! The Cubis tank is nice too, haven't had a dry hit at all. Like that a lot.
A little disappointing that there were a couple of good scuff marks on the screen right out of the box. How does that happen?? I guess I'm the only one that'll notice them.
DH started enclosing my mixing room in the basement today, pretty excited about that. I'm mixing for a lot of friends and want it as clean as possible in there.
Nice dinner you had there Hank. Bout the only thing a bday is good for is getting a really good dinner that you don't have to cook yourself. In my book anyway.
Duty calls... Later peeps


Sent from my iPhone using Tapatalk
Click to expand...
There's a thin sheet of protective plastic on the shiny part. It'll peel off
 
Boattlebot

Boattlebot

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Gunfight everyone that's gone to bed. I lost track.

Good to hear on the inspection honda, get that sink fixed :)

And on that bombshell, good night!
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Boattlebot said:
Gunfight everyone that's gone to bed. I lost track.

Good to hear on the inspection honda, get that sink fixed :)

And on that bombshell, good night!
Click to expand...
ok-corral.jpg
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
kimber said:
Good grief, you'd think I would have known that!! Thanks


Sent from my iPhone using Tapatalk
Click to expand...
Was that it?



Sent from my iPad using Tapatalk
 
kimber

kimber

Silver Contributor
Member For 4 Years
Member For 3 Years
Why yes. Yes it was. Funny, as I'm peeling it off I'm thinking,,, maybe I should leave this on there, a little protection. Too late, once you start peeling it has to come off. Now it really will get scuffed. . Oh well, nobody's gonna see it but me.
Unless of course I get another case of shinyitis and sell it.
Nahhhhh. I kinda like it so far, even though it's as heavy as a brick.


Sent from my iPhone using Tapatalk
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
kimber said:
Why yes. Yes it was. Funny, as I'm peeling it off I'm thinking,,, maybe I should leave this on there, a little protection. Too late, once you start peeling it has to come off. Now it really will get scuffed. . Oh well, nobody's gonna see it but me.
Unless of course I get another case of shinyitis and sell it.
Nahhhhh. I kinda like it so far, even though it's as heavy as a brick.


Sent from my iPhone using Tapatalk
Click to expand...
don't feel bad.. I did the same thing to the little plastic thingy covering the Microsoft logo on my laptop. it took 6 months to realize it was only the protector thingy. hahaha now its two toned. hahahahaha
 
kimber

kimber

Silver Contributor
Member For 4 Years
Member For 3 Years
Sometimes I feel like such a NOOB. And I've been doing this a long time.


Sent from my iPhone using Tapatalk
 
f1r3b1rd

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
LOveWerks said:
Thanks to all of you for your suggestions; as always, you're all a great bunch to read from. Since we're not mech or drip folk, I guess we'll just keep seeking until we find the right thing for us.

Since we're both disabled, it's a bit more difficult to do too many things at once. We located some Sony/Panasonic 18650 3500 mAh batteries. With the soon-to-be available SMOK octuple fused Clapton coil heads (we already have the Clapton quads - boy, do they last... the sextuples, too) - we'll get close.

Safely. Our LG 18650 3000 mAhs have passed their tests with no problems, and we get great clouds between 60-100 watts. With TFV4s.

iPV5s? Maybe. We'll keep everyone here at @Whiskey's Corner posted. With love :).

LW & Liz :):)
Click to expand...
I didn't think sony or Panasonic had a battery with 3500 mah. or anyone for 18650's
Panasonic, did have a 3300 mah, but it was only a 10a battery. You may wanna double check the specs on that, it doesn't sound like a good candidate for higher power.i could be wrong... but ...
 
Joshua Iles

Joshua Iles

Gold Contributor
Member For 4 Years
Member For 3 Years
f1r3b1rd said:
I didn't think sony or Panasonic had a battery with 3500 mah. or anyone for 18650's
Panasonic, did have a 3300 mah, but it was only a 10a battery. You may wanna double check the specs on that, it doesn't sound like a good candidate for higher power.i could be wrong... but ...
Click to expand...
Yeah I have some of those Panasonic batteries, well one, the other one got HOT in a flashlight, so take that for what it's worth, I used em in my vamo but I believe they are 10amp batteries.
 
Huckleberried

Huckleberried

VU Donator
Diamond Contributor
Member For 5 Years
VU Patreon
kimber said:
Funny, as I'm peeling it off I'm thinking,,, maybe I should leave this on there, a little protection. Too late, once you start peeling it has to come off.
Click to expand...
Yep, did the exact same play by play in my own head when I took the film off my VTC.
 
Status
Not open for further replies.

VU Sponsors

Top