Become a Patron!
Your Vape Today? Mod, rba, juice, etc
- Thread starter SMOKIE
- Start date
It's definitely not perfect yet but fairly tasty. All Flavour art. First batch was
3% cookie
4% lemon Sicily
1% Vienna cream
1% joy
Second batch was
4% cookie
4% lemon Sicily
1% Vienna cream
1% joy
.5% cotton candy
I think next time I'll drop both the lemon and the cookie by .5-1% because it felt over flavored this time, just kinda harsh. I like lots of bold flavor though so I'm afraid to drop it too much
Saved to my cookie files
Thank you.
WOW...
Jonny Milkman in one and J-Kandy in the other..
Sent from my XT1080 using Tapatalk
Vape On
Ej my compliments, that's one of the clearest, neatest pics you posted yet! Keep'um like that! Good job man
Break 19 corner shot is Better than this.......
My go to VAPE
Scratch up kbox120
Serpent yummy RTA .5 single clap 40 sweet watts
Peach tobacco 60/40pg 3mg
#workmode 12hours long..
It's 3mg not 6mg... Don't go crazy now!!
Vape On
Sent from my QTAQZ3 using Tapatalk
Thank you sirEj my compliments, that's one of the clearest, neatest pics you posted yet! Keep'um like that! Good job man
Sent from my QTAQZ3 using Tapatalk
Vape On
Nope... You destroyed the GTANK By mixing em up...
Sent from my iPhone using Tapatalk
Vape On
HaterNope... You destroyed the GTANK By mixing em up...
Vape On
Sent from my iPhone using Tapatalk
Pescadore vapes?!!Billow Nano V2 filled with my DIY Stawberry Banana on Joyetech Evic VTC Mini !!! My new EDV on work days
Sent from my iPhone using Tapatalk
Vape On
Diggin' that tank!Billow Nano V2 filled with my DIY Stawberry Banana on Joyetech Evic VTC Mini !!! My new EDV on work days
Sent from my iPhone using Tapatalk
#1 - Sig 150TC with Scylla tank, menthol juice
#2 - Sig 200 Fuchai with TFV4, melon mix
Pretty much my basic all-day setup, sometimes there's a Crown instead of the Scylla. For relaxing in front of the TV at night I've got an RX200 with a Hatty RDA, I run through various different juices depending on what sounds good.
#2 - Sig 200 Fuchai with TFV4, melon mix
Pretty much my basic all-day setup, sometimes there's a Crown instead of the Scylla. For relaxing in front of the TV at night I've got an RX200 with a Hatty RDA, I run through various different juices depending on what sounds good.
SMOKIE
THE MODFATHER
Staff member
VU Senior Leadership
VU Senior Administrator
Senior Moderator
VU Donator
Platinum Contributor
VU Live Leadership
Show Host
Reviewer
Vape Media
VU Live Host
Member For 5 Years
Today's Vape! Is it really peanut butter flavor or not? Find out next week in my review, smokie901.com #smokie901
Pescadore vapes?!!
Vape On
Just my DIY stuff .. had to call it something so I chose my forum name. I use the same name on all the forums I belong to.
Loving it so far. A little harder to build on but not that bad and once you learn how to wick it properly it rocks !!
Info about ur creation?
Vape On
In a religious retreat organization that I belong to the word Pescadore stands for "fisher of men"
How's the banana cream?
TGIF
4 days off YAHOOOOOO
Vape On
Sent from my iPhone using Tapatalk
Good banana. Fake banana? Banana pie? Banana milk?VERY GOOD
IMO
Vape On
Sent from my iPhone using Tapatalk
Good to know fisherman
Info about the JUICE?
Vape On
I got the recipe from a friend that I was buying juice from and started making it myself. I can't seem to get away from it no matter what else I try. I can't remember the percentages off the top of my head but I would be glad to PM you later with them if you want. I do know that it is a lot higher in Strawberry flavoring than banana and has some sweetner added. All of the flavors on the recipe are TFA but I really like FA flavors better but I have to tone it down some. The Strawberry Banana and Blue Rasberry Cotton Candy recipes are my two favorites but I like a sweet vape. Not big on custards or creams but some are okay.
Can you tell me now? They have a sale brewing now and I was wanting to place an order this weekend hopefully.
Vaping on my new RX200 with a Kanger Subtank Mini (gotta get a new tank this weekend to go with the RX) and Suicide Bunny Cloud Company "Revel" I think, which ever the updated Max VG Mothers Milk flavor is from the Cloud Co line.
How long is the sale going on? The show is on tomorrow night at 10 EST.
It runs through Sunday. What and where is the show? Is it on vapers tv?
yep!
My new Kbox 200 with Uwell Crown @ .5ohm, vaping Vape Wild's RY4Life
In case you aren't watching the show, they seem to really like the Peanut Butter flavor.
SMOKIE
THE MODFATHER
Staff member
VU Senior Leadership
VU Senior Administrator
Senior Moderator
VU Donator
Platinum Contributor
VU Live Leadership
Show Host
Reviewer
Vape Media
VU Live Host
Member For 5 Years
Today's Vape, Sticky Rice by Craft Vapery. Think this might be a Asian favorite. Some great flavor. #smokie901
How well does the mango come through? This caught my eye the other day but they didn't have any testers available yet so I couldn't try it, sounds pretty damn good though!
SMOKIE
THE MODFATHER
Staff member
VU Senior Leadership
VU Senior Administrator
Senior Moderator
VU Donator
Platinum Contributor
VU Live Leadership
Show Host
Reviewer
Vape Media
VU Live Host
Member For 5 Years
The Mango flavor comes through nice with a touch of the mango sweetness on the inhale but having a lot more mango flavor on the exhale.
Sounds perfect to me! Gonna give it a go next time I pick up some juices, been looking for really good mango based juices, most kinda fall flat, so I was hoping for good things from this. Thanks!
Why put a beautiful atty like the Snubnose on top of a beater old SMPL? Reasons. That's a 30ml bottle next to it. Tiny terror. Perfect
concealed carry.
I wish I had bought a handful of these A-MOD SMPL's when they were everywhere. I don't think they've been made in a minute now. I love this mod, but the rubberized coating looks like shit now. It has held up well and the mod itself is my Cadillac. It performs like it did when it was new, even after being dropped two stories, slammed against metal conveyors, dropped out of a moving vehicle...
...it just really shows its age. It looks as haggard as a mod that's seen daily use for nearly two years would. An SS version would pair great with this little gunmetal beast. I'm thinking about taking the rubberized finish off of it and showing off the brass underneath it. I wonder if acetone or naphtha would dissolve it. I just worry about preserving the brass after that. This mod will probably hold up for decades with the synth-o-rubber outer. I can maybe see myself needing to change the spring at some point. Rust isn't something I want to have to deal with. I'm not a jeweler or a metallurgist.
Anywhey.... ...running a .155 dual 23g - 5 wraps @ 3/32 in there. Warmth, flavor, and density are pretty on-point. Vapor production is great considering it's coming from a flavor atty on a mech. Just kinda set it all up on a whim. I never run my shit like this, but it worked out pretty well. Juice is I
Doughnuts in a unicorn bottle, because glass dropper bottles are probably the worst thing to happen to vaping.Seriously though, does anyone prefer the dropper bottles that are cumbersome to drip on the go with? Do you enjoy when the juice from the rim of the cap runs down and coats the whole bottle in a fine layer of sticky mess? Perhaps you like when the cap locks up on you. Thinking you just have too much pocket space? Or maybe you just like having to pour the last of it out? Don't even get me started on 120ml dropper bottles. Why in the fuck is that a thing?!
Last edited:
Why put a beautiful atty like the Snubnose on top of a beater old SMPL? Reasons. That's a 30ml bottle next to it. Tiny terror. Perfect
concealed carry.
I wish I had bought a handful of these A-MOD SMPL's when they were everywhere. I don't think they've been made in a minute now. I love this mod, but the rubberized coating looks like shit now. It has held up well and the mod itself is my Cadillac. It performs like it did when it was new, even after being dropped two stories, slammed against metal conveyors, dropped out of a moving vehicle...
...it just really shows its age. I love this mod, but it looks as haggard as a mod that's seen daily use for nearly two years would. An SS version would pair great with this little gunmetal beast. I'm thinking about taking the rubberized finish off of it and showing off the brass underneath it. I wonder if acetone or naphtha would dissolve it. I just worry about preserving the brass after that. This mod will probably hold up for decades with the synth-o-rubber outer. I can maybe see myself needing to change the spring at some point. Rust isn't something I want to have to deal with. I'm not a jeweler or a metallurgist.
Anywhey.... ...running a .155 dual 23g - 5 wraps @ 3/32 in there. Warmth, flavor, and density are pretty on-point. Vapor production is great considering it's coming from a flavor atty on a mech. Just kinda set it all up on a whim. I never run my shit like this, but it worked out pretty well. Juice is I
Seriously though, does anyone prefer the dropper bottles that are cumbersome to drip on the go with? Do you enjoy when the juice from the rim of the cap runs down and coats the whole bottle in a fine layer sticky mess? Perhaps you like when the cap locks up on you. Thinking you just have too much pocket space? Or maybe you just like having to pour the last of it out? Don't even get me started on 120ml dropper bottles. Why in the fuck is that a thing?!
Even Better
, I also rock tubes here and there:
Sometimes I rock my Goblin Mini or a Diablo on a 2 SIX mod (18350 Mod)....Its good for family gatherings but the setup pictured is a light weight setup that can last just about a full night out....and its a damn good vape!
Haha, I'm telling you there's no shame in it man! It's called practically. We just be vapin' smart. Well... ...how smart it is to stick a .15 on a tube mod is debatable, but you already know all about that. With something so fast in a chamber so small, I take very short drags. I run my VTC3's, 4's, and especially my prized LG HB6's in it. Runs cool and keeps up for longer than you would think. I made it through my whole day without changing batteries, which is unusual for me. I can't pull that off running .7's on my NC or going any higher than 80w on my Sig 150. I was impressed when I got home and dropped the battery on the charger. 3.6v, man!Even Better
View attachment 41206View attachment 41208
Sometimes I rock my Goblin Mini or a Diablo on a 2 SIX mod (18350 Mod)....Its good for family gatherings but the setup pictured is a light weight setup that can last just about a full night out....and its a damn good vape!
I blew this dude's mind at work today with the setup I posted. When I took it out he laughed and asked me what that bullshit was. Then, I let him hold it and hit it... ...now, he wants to buy it off of me lol. I mean, this guy is a solid builder... ...always running the best RDA's on the best reggy boxes. He knows how to get a good vape. Just kinda figured he would have known what he was looking at when I brought it out of my pocket.
There seems to be, in this age of fancy regulated devices and big-ass, high-power oriented tanks, a vast pocket of vaping culture that is unaware that you can have a dead serious vape without a fancy, hulking dual 18650 series regulated mod. There are times and places for them, but for my out and about, I will choose the modest, but elegant mech-mod-and-shorty combo every time. Anything else would be like wearing the most comfortable dress shoes to go work in a foundry. Why inconvenience yourself for that comfort when a good pair of boots, while being somewhat limiting of your movement, will be even more comfortable and hold up better?
I dunno, that's just me. Mech mods are my first and only true vape love. If I had to choose an end-all, be-all power source to use exclusively... ...forever, then I couldn't be happier with anything other than a trusty mechanical tube mod. They just have the best balance of practicality and performance capabilities, imo.
Well the thought that the best vapes are created with regulated boxes and rda's is crap. Any build on a Regulated box can be a great vape as you can pump the wattage to make it great if its anemic to start with. With Tubes you need experience, Know-how and a well prepped build to get the results your looking for....Its not for everyone and it takes time, effort and skill to produce something good but once its where you want it its a damn good vape.
I know you can set your wattage the same and blah blah blah with the regulated boxes but you cant mimic the ramp up and heat buildup of a hard hitting tube with a great build....It always seems different on a regulated box, no matter how you adjust the wattage....
I just woke up so I apologize for any grammar mistakes or out of context typing.
Absolutely. That's why part of me always thinks that if you're serious about getting into "advanced" vaping... ...rebuildables and such, you should start by learning to build for a mech. Learning how to use a mech safely is very easy - it should really only take a day or two to wrap your head around that and learn respect for them, but actually getting a good vape out of them is challenging.
However, it teaches you a lot about the art and science of building coils. If you can build for a mech, then you can build even better for anything else. I'm very glad that I learned how to coil with nothing but a mech at my disposal. Because of that, I can think up a coil in my mind and know exactly how it will perform because that's what you have to do when you're throwing a build on top of a mech. There's no way to make an inferior build perform well on them after the fact. This is a skill that really comes in handy.
Indeed. That's another thing... ...nothing hits like a mech does. I actually hated regulated mods when I first got one for that very reason. It was like no matter what I did, something was missing. It just isn't the same. It's just very abrupt and forceful by comparison. The delivery of mechs is just classier by comparison.
I would be really interested in a regulated mod that simulated the power curve of a mech mod. I think the natural roll-off completely changes the way a coil performs at a given power level and that changes the builds you do. Quite often, mech coils are smaller, but something about the drop off seems to make them perform as well as bigger coils in a regulated box. I think it has a lot to do with heating and wicking.
When you pump continuous power to a coil, it heats up on a logarithmic curve. The longer you hold down the button, the hotter the coils get and the faster they seem to heat up with that fixed power moving through them. After a certain point, it starts to overcome the wicking. Whereas a mech peaks immediately... ...that initial burst is just enough to heat the coils before it plateaus and sort of maintains the temperature.
I've always thought of it as being like natural temperature control. Mechs are less likely to make a coil get wild on you, so you can take deeper and more satisfying drags.
Last edited: