That's an expensive puppy!
I can find it at other places...Italy uggh... messaged the company to see if they ship to the USA... if they do... I might grab one.
That's an expensive puppy!
The MF is coming from Italy too....They said estimated delivery 14 days....we will see, so far tracking shows it still in Italy.
Not awful compared to the Insider and the like. I read that it's best DL so I'm out on that one.hmm... got a reply from Italy regarding the doggy rba... they will ship to the US... but its still $105 total lol ($70 doggy rest shipping )
View attachment 112332
Not awful compared to the Insider and the like. I read that it's best DL so I'm out on that one.
Sent from my SM-G965U using Tapatalk
For the Doggy? I'm using the KF5 ones in my Exocet and they're working very nicelyThey have the MTL inserts for it also similar to the VapeShell ( Drop in discs )
OK doggy, you had me laughing so hard, I spewed beer out my nose! It's a damn shame, it was the perfect black & tan, then I started laughing, shook the glass and it got all mixed....had to drink it all real fast and mix another, not as perfect but will do.
What are kf5 im lookin for more mtl and mine is comeing with exocetFor the Doggy? I'm using the KF5 ones in my Exocet and they're working very nicely
Sent from my SM-G965U using Tapatalk
Kayfun v5 inserts https://originvape.com/product/svoe-mesto-kayfun-5-mouth-lung-kit/What are kf5 im lookin for more mtl and mine is comeing with exocet
Sent from my SM-G950U using Tapatalk
Kayfun 5 MTL inserts. They're pricey at about $15 shipped but worth it IMOWhat are kf5 im lookin for more mtl and mine is comeing with exocet
Sent from my SM-G950U using Tapatalk
Welcome! The BB is a very unique little device.Just cruising through learning what I can. Gonna be the owner of a rev 4 Thursday. I see some familiar names. Guess everyone eventually makes their rounds.
Sent from my Nexus 6P using Tapatalk
Welcome! The BB is a very unique little device.
Currently getting two days out of a single Sammy 25r, vaping 18mg DIY salt nic (about two tanks full) at 20 watts on a 0.6 ohm coil.
Not that's efficient!
Sent from my SM-G965U using Tapatalk
I was trying builds ~1.0-1.2 Ohm with SS wire in gauges from 26-32. Found TC kind of wonky even with customization via Escribe (which I've detailed how to do in an earlier post to this thread)...I vape a 3mg regularly and have some 45mg salts for some pods I have. What resistance do you guys usually run in a billet? I know everyone is different but just trying to get an idea. Have an rba coming with it just figured I'd the same nice with a .3 or so coil. Any pointers or is it just whatever works for me. Never found interest in bb because I wasn't really interested in going back to stock coils.
Sent from my Nexus 6P using Tapatalk
Thanks for that. I can get by with a .4 for sure. But yea I guess battery life and juice consumption play a role in it too.I was trying builds ~1.0-1.2 Ohm with SS wire in gauges from 26-32. Found TC kind of wonky even with customization via Escribe (which I've detailed how to do in an earlier post to this thread)...
My sole motivation for doing TC on the BB was so as to avoid constantly checking the juice level in order to prevent dry/burnt hits...
As of now, I kind of gave up on TC in BB, and am fine with ~17-22w in power mode on a ~1.1 Ohm build.
At this resistance, battery lasts a while and juice consumption is lower..
Also recently experimented further with my DIY and trying nic salts to try and reduce juice consumption.
I cannot vape freebase nic higher than 1.8mg without getting an instantly blinding headache (nic sick) and am usually @ 1.5mg with freebase nic.
So I started there with the nic salts, and mixed up 8 incremental batches of 30ml before concluding that higher than 4.7mg/ml has the same nic sick effect on me. So I finally mixed up a 120ml bottle of 4.5mg/ml since the math was easier (by volume) and I'm gonna ride this out on the 120ml.
With the 1.5mg/ml freebase, my consumption is about 20-25ml per day, and with the 4.5mg/ml nic salts I am at about 12-15ml per day...
Currently, my last build for the BB, on the SteamTuners Insider was 5 spaced wraps of 24g KA1 on 3mm ID, which comes out to 0.45 Ohms, and until I crippled my BB (in an earlier post above, today) I was very happy with that, but also really liked an 8 or 9 wrap 26g KA1 on 3mm ID, which came out to ~1.1 Ohms...
I need to order a new screen from Evolv ($14 shipped), but I am not sure if I need the 'small' screen or the 'large' screen for the DNA60 - if anyone knows and can provide proof of which one, I'd really appreciate it.
I vape a 3mg regularly and have some 45mg salts for some pods I have. What resistance do you guys usually run in a billet? I know everyone is different but just trying to get an idea. Have an rba coming with it just figured I'd the same nice with a .3 or so coil. Any pointers or is it just whatever works for me. Never found interest in bb because I wasn't really interested in going back to stock coils.
Sent from my Nexus 6P using Tapatalk
I got used to higher nic on my honeymoon with some Mr. Salt-e at 24mg in my MiPod. Was confined to the smoking areas at Disney so I had to get my nic fix in a few minutes. I ran 0.6 ohm coils and had a pretty airy MTL draw. I'm basically getting the same vape off my BB (more flavor, etc.).My goodness! 18mg NS!
Fuck I'd have a seizure lol
I mixed up some 9 salt...thinking, this is a good place to start... took a toot and nothing but "WHAHH WHAHHs" in my head from to much Nic lol... same feeling I used to get when I would take a toot of bud years ago.... cept the Bud Whah Whahs would last an hour+ lol
So I have a bottle of 4.5mg Nic Salt Vanilla bourbon that does the job...
Tried in the BB with my .87 KA1 at 19w (The 9mg that is)
In my experience, stick with a higher round wire build in these RBAs. The chamber is so small that it makes building easier and you don't sacrifice flavor. Just my 2 centsThanks for that. I can get by with a .4 for sure. But yea I guess battery life and juice consumption play a role in it too.
Sent from my Nexus 6P using Tapatalk
I'm getting on with it just fine. 26g, 8 wrap, 2.5mm ID. Reads around 0.6.anyone have good experience with the sxk vape shell?
have one coming, reviews appear mostly bad
I'm getting on with it just fine. 26g, 8 wrap, 2.5mm ID. Reads around 0.6.
It seems to want to dry up once the juice level gets even with the top of the "shell" though. A couple good pulls with my finger over the airflow slots usually does me good for a few toots.
Sent from my SM-G965U using Tapatalk
Not sure how the airflow is but I'm figuring heat may play into it as well. Thanks again man. For the help and the sale. For another thread but my Furyan shipped today as well. Might have to sell some squonks to get me some new stabwood panels.I got used to higher nic on my honeymoon with some Mr. Salt-e at 24mg in my MiPod. Was confined to the smoking areas at Disney so I had to get my nic fix in a few minutes. I ran 0.6 ohm coils and had a pretty airy MTL draw. I'm basically getting the same vape off my BB (more flavor, etc.).
When you're tootle-puffing it doesn't hit quite as hard. I save my free base nic juice for my single coil squonk setups these days.
Also gets me incredible battery life and is very conservative in juice. In my experience, stick with a higher round wire build in these RBAs. The chamber is so small that it makes building easier and you don't sacrifice flavor. Just my 2 cents
Sent from my SM-G965U using Tapatalk
Make sure you look into troydestroy's panels. They're durable as hell (3d printed nylon) and he does custom designs. Much less expensive than stab tooNot sure how the airflow is but I'm figuring heat may play into it as well. Thanks again man. For the help and the sale. For another thread but my Furyan shipped today as well. Might have to sell some squonks to get me some new stabwood panels.
Sent from my Nexus 6P using Tapatalk
I'm going to get a a-tank as well. I've got about 5 Atlantis coils and 2 packs of vapresso ccells as well. That way I can see what works best for me. Been a while since I've used a prebuilt coil though. LolI currently have a .96 coil in my Billet at 21w vaping the 4.5mg Nic juice I made up...although its a premade coil...wasn't getting on with the Insider I have... Have an Exocet to arrive some time today, which I will slap a .9 in and give it a go again.
So far with the premade coils ( Vaporesso cCell ) I am getting about 70ml a coil...and flavor is good. Break in sort of sucks on the ceramic coils...but once they are broken in, they shine.
I also vape 3mg and 1.5mg ( transition ) in my RSAs.
As for how to build... there is no set way... its a regulated device Treat it as such.
You build a fused clapton at .36 or a single Kanthal build at 1.1+ adjust the wattage til you get the vape you like.
IF that is 20w at .8 or 30w at .35... all good
Oh damn didn't know he did panels as well. I'll have to check him outMake sure you look into troydestroy's panels. They're durable as hell (3d printed nylon) and he does custom designs. Much less expensive than stab too
Sent from my SM-G965U using Tapatalk
Check out 3F for extra tanks, including the Atlantis ones, a hell of a lot cheaper than BB siteI'm going to get a a-tank as well. I've got about 5 Atlantis coils and 2 packs of vapresso ccells as well. That way I can see what works best for me. Been a while since I've used a prebuilt coil though. Lol
Sent from my Nexus 6P using Tapatalk
I'm going to get a a-tank as well. I've got about 5 Atlantis coils and 2 packs of vapresso ccells as well. That way I can see what works best for me. Been a while since I've used a prebuilt coil though. Lol
Sent from my Nexus 6P using Tapatalk
Thanks for those photos.DNA 60 Small
View attachment 112410
DNA Large
View attachment 112413
Another Side by Side...
View attachment 112414
I had to drill out the holes in the bottom to prevent getting dry hits.anyone have good experience with the sxk vape shell?
have one coming, reviews appear mostly bad
If it was the MTL I'd find something nice to trade youYup... I can say I like the Exocet a lot more than I do the Insider... suits my style of vaping.
Any of you interested in an Authentic Insider?
If it was the MTL I'd find something nice to trade you
Sent from my SM-G965U using Tapatalk
I just spent a f*king king's ransom on a Insider MTL. I like the Insider (v1, no logo) but I want the MTL edition.
For me, MTL is AF of about 1.1 to 1.3 mm. For you it would be like sucking a watermelon thru a straw, but that is what fits my style of mtl vaping. I must admit, I've been mostly vaping a comfy DL (read restricted DL for the rest of y'all) with the Supersonics and Odis16's. I haven't used the Haku or the Stumpy in quite a while now.Indeed...I've never been a MTLr...couldn't even begin to say if something even comes close...my style is NarDa about half open... which I can only assume is no where close to MTL lol
As for the Logo on your Insider...have it face the back
Edit: Unless the Logo is on both sides lol, which I don't know if it is
Trade you an authentic Entheon with the slam cap kit and two SXK Hadeon caps in SS and black delrin?I was able to turn this one down quite a bit...but I know its not true MTL like the MTL edition...I'd fucking pass out trying to take a toot off one of those lol
I am figuring $75 Shipped is a decent price for the Insider... being the cheapest Authentic I was able to find was 110 Euro before shipping.
Thanks... but I am straight on RSAs...Trade you an authentic Entheon with the slam cap kit and two SXK Hadeon caps in SS and black delrin?
Sent from my SM-G965U using Tapatalk
Understood. I've got a second Basic 1.1 coming so I'm good in RSAs too!Thanks... but I am straight on RSAs...
Mostly the money I'd sell the Insider for would be used to buy a Doggy