Mostly just trying to get the biggest clouds to out do my friends. You think this would be best build for this? I really have no use for nicotine as I'm just gonna be messing around with it so I'm probs gonna 0 nic it.well nowadays you can do alot with $100 in vape gear. the list goes on for days. you can get a sigelei 50 watt vr2 for about $60 with a mutation v v3 for another $25 and 2 samsung 25r's for another $7 each... illumn.com is great for batteries. vapordna.com is a good all around site. 101vape.com is good for a couple things. vaperoyalty.com has a pretty good selection of mods / rda's/ etc. if getting clones, i suggest infinite. (for rda) tobecco seems to be crap so be careful. just my experiance
well if its just for "clouds" then the mutation would certainly do it. also the dark horse. you could fit an insane amount of thick parallel builds into the dark horse post holes. 100% VG of course. but then again, this depends on your building skills. if you dont know how to build, then you could get the arctic subtank/ atlantis subtank/ delta 2 etc. the sigelei 100 watt + model is around $80-90 at vaporrange.com. its dual 18650 in series. running the 50 watt version at its max would drain the battery pretty quick as its only a 1 battery mod
This is the same reason I started vaping four years ago. Enjoy the day!Mostly just trying to get the biggest clouds to out do my friends. You think this would be best build for this? I really have no use for nicotine as I'm just gonna be messing around with it so I'm probs gonna 0 nic it.
(for rda) tobecco seems to be crap so be careful. just my experiance
He's not looking to build a box, just buy oneBox..Plastic or metal
"Correct" gauge wire
"Correct" solder"
Momentary switch
"Correct" mosfet and fuses
"Correct" battery or batteries.
Quality 510 connector.
Electric drill...proper drill bit sizes...proper tap size.
None of this above means shit if you dont know anything about ohms law or batteries however.
Hell I may even be interested in this deal lolI've got a 150w sigelei with mxjo batts, a dark knight atty, a 100ft roll of 22ga kanthal, a whole bag of jap org cotton, and a nitecore d2 charger I'd sell for $200 shipped. All you'd have to do is wrap wire and go to town. Actually not even that. Knight has a .08Ω build in it. All you'd have to do is get juice.
I'm brand new to building. I've had a box mod (kinda) with an Itaste and Kangtech Pro and a few Pen vapes. This is my first time "building".
Would this be enough to COMPLETE my box mod with minimal building?
BOX:
ATOMIZER:
BATTERIES:
CHARGER:
JUICE (100% VG)
As well, what "building" would this require? I'm really looking for the most minimal work (I know I sound like a bitch) to make the best set up.
If not I'd really appreciate your help in finding the easiest but best quality one to set up.
Well let's get with it. Daddy needs a mod with a DNA under the hood lolHell I may even be interested in this deal lol
I would, but I only have $136 in my account right now.I've got a 150w sigelei with mxjo batts, a dark knight atty, a 100ft roll of 22ga kanthal, a whole bag of jap org cotton, and a nitecore d2 charger I'd sell for $200 shipped. All you'd have to do is wrap wire and go to town. Actually not even that. Knight has a .08Ω build in it. All you'd have to do is get juice.
Read above..simple as it gets.I really would like to avoid any in depth building, basically I would just like to get the parts and not have to modify (yes I know it is a box MODIFICATION lol) and just assemble the basic parts I ordered (atomizer/tank + box + batteries) and not have to touch anything that I could make dangerous besides charging the Li-ions. Is this possible?
Read above..simple as it gets.
Any atty will require you to "build" the coil unless you buy premades but you still have to install the coil.
Artic tank on the Dovpo GX200, comes with a .2 ohm resistance built in coil, incredible airflow and no need for building, just buy replacement coils when need, they screw right in and outI really would like to avoid any in depth building, basically I would just like to get the parts and not have to modify (yes I know it is a box MODIFICATION lol) and just assemble the basic parts I ordered (atomizer/tank + box + batteries) and not have to touch anything that I could make dangerous besides charging the Li-ions. Is this possible?
EDIT: If possible as well, I'd much rather use a Clearomizer instead of an RDA. My build as of now is this:
You have 2 things i dont like really....I tend to like having more power than i need to lessen the stress on the electronics....you might only find you need or want 35 watts however, which is fine....if you have it set to 45 50 watts all the time it may not last you very long....if younfind you need more than 40 watts to get you desired clouds then you might consider more power is what im saying.
Problem number 2 is the battery...No the Samsung is NOT a good choice to push a .2 ohm coil especially with it being only single battery powered....I strongly suggest you spend a few dollars more and get the Sony VTC4 batteries for your safety and your friends.
Artic tank on the Dovpo GX200, comes with a .2 ohm resistance built in coil, incredible airflow and no need for building, just buy replacement coils when need, they screw right in and out
http://www.eciggity.com/arctic-sub-ohm-tank-by-horizon/
You got my thumbs up with that shopping cart list.Taking both your comments into mind, would it be possible to use the tank on the sigelei or would the resistance/voltage diff cause a problem.
Here would be my build:
That artic tank is good up to 100w with the .2 ohm coil in it!Taking both your comments into mind, would it be possible to use the tank on the sigelei or would the resistance/voltage diff cause a problem.
Here would be my build:
Nice, but hopefully he chooses something regulated or at least a safe mechanical box as it appears he should have more insight before going to a tube mechanical or anything with no safety features built in.
$90 authentic setup. Mutation X v3 & Aethertech VCO v2
I think the artic is a better tank IMO especially for his needs and I think the Dovpo is his best bet too, MXJO high drain batteries work great with that box and a pair of those on 101 vape are on like $17I think you could get more clouds though with more power..just saying.
.2 ohm coil with 4.2v is pulling 21 amps...hence why i say you need the vtc4 batteries for such a low ohm coil at high watts....Another thing to consider is that equals 88 watts of power which the 50 watt wont give you.
I have to retract my thumbs up and say you need at least a 100 watt box or that dovpo gx200 to get the most from that tank.
Any consideration to a Kanger subtank mini at all with.5 ohms.?
Yea..the dovpo is much less costly as well...The MXJO batteries are just re wrapped and sold at a much higher price than you can buy the original battery...Not sure which cells mxjo uses but i can assure you they charge more for them than you can buy originals.I think the artic is a better tank IMO especially for his needs and I think the Dovpo is his best bet too, MXJO high drain batteries work great with that box and a pair of those on 101 vape are on like $17
Nice, but hopefully he chooses something regulated or at least a safe mechanical box as it appears he should have more insight before going to a tube mechanical or anything with no safety features built in.
I swear by mxjo batteries, I've used them in all kinds of build conditions with zero issues, I've also unwrapped them and never seen any other companies markings or labels or anythingYea..the dovpo is much less costly as well...The MXJO batteries are just re wrapped and sold at a much higher price than you can buy the original battery...Not sure which cells mxjo uses but i can assure you they charge more for them than you can buy originals.
Heres THE 5 battery manufacturers.
1.)Sony
2.)Samsung
3.) LG
4.)Panasonic
5.) Sanyo
Im not disputing whether they are a good cell or not..im sure they are but they are one of the 5 batteries i listed above and just costs more money than one of the 5 listed...thats all im saying.I swear by mxjo batteries, I've used them in all kinds of build conditions with zero issues, I've also unwrapped them and never seen any other companies markings or labels or anything
so everything the same but use sigelei 100w instead? Is there any precautions I need for it or is it ready to go with all te parts I have? Just charg and play?Get the 100w box and you will have all you need use the Arctic tank to its fullest potential...Still get the sony vtc4 batteries though.
I could figure something out but te biggest problem is I have to use my card which try ship to the billing address where I can't pick it up at the moment.Ive had that problem myself before...do you have a friend or family close by whos address you can use?
Be sure to say "PO Box" then the number..not just the number.
check out whitelabeljuiceco.com $20 for 100ml bottle of max vg juice. good flavors too w/ free shipping. shipping usually takes my orders 2-3 days. if your brand new and want clouds, id suggest getting 1 of the many good subtanks out there. hassle free, no building required. i dont have experiance with the nitecore chargers. but i do know xtar and efest have good chargers. the 50 watt sigelei works great for me. i love mine. if you do get an rda however, also get an ohm reader!I'm brand new to building. I've had a box mod (kinda) with an Itaste and Kangtech Pro and a few Pen vapes. This is my first time "building".
Would this be enough to COMPLETE my box mod with minimal building?
BOX:
ATOMIZER:
BATTERIES:
CHARGER:
JUICE (100% VG)
As well, what "building" would this require? I'm really looking for the most minimal work (I know I sound like a bitch) to make the best set up.
If not I'd really appreciate your help in finding the easiest but best quality one to set up.
I think its a bit overkill but yea it will work....Sigelei 150w?The problem is they don't ask for shipping address they just send it to te billing address. I found a site where I can get a 150w and still send to a po box, would it be fine to use 150w with my
Rig?
101vape.com vaporrange.com and others ship to alternate addresses. 150 watt version has had alot of complaints about the sticky fire button. maybe theyve fixed that though. but yes it would work. basically anything with at least 20-30 watts would do it, so yea the 150 certainly would lolThe problem is they don't ask for shipping address they just send it to te billing address. I found a site where I can get a 150w and still send to a po box, would it be fine to use 150w with my
Rig?
"Mostly just trying to get the biggest clouds to out do my friends"I really would like to avoid any in depth building, basically I would just like to get the parts and not have to modify (yes I know it is a box MODIFICATION lol) and just assemble the basic parts I ordered (atomizer/tank + box + batteries) and not have to touch anything that I could make dangerous besides charging the Li-ions. Is this possible?