Mine was in the Anaheim sort facility from Monday until early this morning, and it's magically at my post office now. So don't lose hope... USPS=facepalm.Well... my hopes of getting mine on Friday are dwindling... it's been in Anaheim, CA since June 30, 2015 at 4:19 am. That's a long way from TN.
Mine is sitting with yours in Anaheim since 4:19. I hope yours doesn't slow mine downWell... my hopes of getting mine on Friday are dwindling... it's been in Anaheim, CA since June 30, 2015 at 4:19 am. That's a long way from TN.
Mine is sitting with yours in Anaheim since 4:19. I hope yours doesn't slow mine down
Man, I lucked out I guess for once. Mine is out for delivery, maybe it wasn't invited to the Anaheim party?Haha, that's where mine is too as of 4:19am on 6/30. IPV3 Li PARTY IN ANAHEIM!
Man, I lucked out I guess for once. Mine is out for delivery, maybe it wasn't invited to the Anaheim party?
It's been in my possession for a good hour, I've already vaped almost a whole TCT tank. The battery meter fluctuates a bit oddly, but I metered them and they're draining evenly, so just something to keep an eye on. It's not battery sag, this chip doesn't show that, at least in TC mode, nor does the 4. I need to re wick, and or re build my nickel attys, but the TCT is making me lazy. I have three now, lol. It's a great tank. I'm very impressed.Lucky you!!!
No matter where you go, take your Vape!
I wouldn't classify it as a total cluster as I have one and happily using it.Even though I haven't received mine yet, I am so glad I passed on the IPv4 clusterf**k that is happening currently. Dodged a bullet on that one.
I was referring to the how they're bringing out the "s" model, before updating original.Wasn't trying to knock the device itself, just Pioneer's handling of the situation.I wouldn't classify it as a total cluster as I have one and happily using it.
No matter where you go, take your Vape!
I will second that then!I was referring to the how they're bringing out the "s" model, before updating original.Wasn't trying to knock the device itself, just Pioneer's handling of the situation.
I actually have 2 and love them not 1 issue with either. From what I have heard is that Denny over at P4y is planning on releasing an update for the current ipv4 to run the same software as the ipv4s.Even though I haven't received mine yet, I am so glad I passed on the IPv4 clusterf**k that is happening currently. Dodged a bullet on that one.
Dude you seriously are the best! One of the most informative guys here. Keep up the great workI actually have 2 and love them not 1 issue with either. From what I have heard is that Denny over at P4y is planning on releasing an update for the current ipv4 to run the same software as the ipv4s.
Any news on yours? Delivery day and mine still reads AnaheimWell... my hopes of getting mine on Friday are dwindling... it's been in Anaheim, CA since June 30, 2015 at 4:19 am. That's a long way from TN.
I'm thinking it's software, not hardware. It functions perfectly in power mode. That suggests to me that the sensor is obviously working. I'm interested to hear of other peoples experiences, though. At least it's really just a novelty, and is unnecessary. Everything else is great.Good thing I didn't jump the gun and buy this one. I'll wait for the ipv 4 update and be happy till something else comes out that's better.
It showed up today!Any news on yours? Delivery day and mine still reads Anaheim
Update: well, it didn't make its delivery date
I just got mine, did the upgrade, and it works with TC. I just don't like its location.I just read through the thread a bit, it seems others have mentioned the touch sensor not working right with TC. Specifically @HoustnWeHavUhoh , I'm curious if yours does the same as mine, since you said it doesn't work right in TC. I really don't want to deal with exchanging it, especially if it is normal.
So it will adjust to temp and cut off just like the button? Did you try prior to upgrading? I haven't upgraded yet. Glad you like it, btw. Don't know what I'm gonna do, will wait it out for more replies.I just got mine, did the upgrade, and it works with TC. I just don't like its location.
No matter where you go, take your Vape!
I just made sure it turned on and fired then immediately updated it. So I don't know if touch worked in TC mode before update. All I've done is use touch sense to fire the mod.So it will adjust to temp and cut off just like the button? Did you try prior to upgrading? I haven't upgraded yet. Glad you like it, btw. Don't know what I'm gonna do, will wait it out for more replies.
Well, I just upgraded, used my dad's laptop. Wanted to try prior to contacting the vendor. So far so good. Turned on the touch sensor, it's working perfectly in TC, now. I wonder if others have the same issue... As long as it keeps functioning I'm fine. Was really not looking forward to exchanging it. Typical P4Y beta testing with us. All is well so far... Back to loving the Li!I just made sure it turned on and fired then immediately updated it. So I don't know if touch worked in TC mode before update. All I've done is use touch sense to fire the mod.
No matter where you go, take your Vape!
In my usual tendency with vaping, I ordered one today... I posted earlier In This thread saying I was skipping it, that didn't last long. My 3 is just so more solid than my 4, and at Mile High Vape Fest last weekend, amongst a shit ton of other stuff, I tried one out.
Vape Fests are awesome, was my first. This belongs more in the tank section, but being TC related, I'll post it here. I got a ton of stuff, great deals.
I got two Smok TCT tanks, and a couple VCT Pro coils, they're the same tank, just come with different coils. I highly recommend them. They are awesome, so far I've only used the nickel heads, but the flavor is superior to my Arctic, and they hold 5.5ml, which is huge. They upgraded the Smok tanks, the coils look very similar in design to Arctic ones. Huge side rectangular wicking, organic cotton, and easily as much airflow as an RDA. They were only $15, kinda kicking myself for not getting more. They're about $20-$25 online, and well worth it. Makes building nickel RDA's almost pointless, especially if I can re build the coils. The drip tips are super nice, too, and regular 510. There's a top heat sink, and the tips are stainless, with a glass mouthpiece. You can open airflow on the tip to cool the vape, if that's your thing, too.
They handle up to 600 Fahrenheit, I keep mine around 513, no dry hits, wicks max VG like a champ, and flavor is excellent. Anyone looking for a new tank for their TC mod should check these out. They come with green, red, and black o rings, two .15 coils, and an extra glass section. Very highly recommended. My Arctic drinks juice, and has a tiny tank, these guys are great, and they look slick.
I can't believe I ordered an Li, I knew I would, lol. Gotta have backups for everything, so I need a second TC mod... Right?
No problem! I got three at $15 a pop... I'm pleased. Now that the firmware upgrade seems to have fixed my touch sensor in TC mode, I'm a happy camper! Hope you got in on the deal for the TCT, it a shame you can only get one a day. I lucked out at the vapefest, and they're local for me. They beat the hell out of my Arctic Tank, flavor, and capacity. Haven't tried the Ni200 Arctic Heads, but the 2.5 ml capacity is a joke, it's gone almost immediately. The TCT with 5.5ml lasts a respectable amount of time.Thanks for the heads up on the TCT, bet tank I have tried so far for TC. Still not as good as I know it can be, but a darn good deal for the money and it puts the Kanger and Atlantis to shame with nickel coils.
Finally got the coupon code to work. They have double listings of the sale items. You have to select the ones that say (Vape Meet) in the title in order to use the discount code. Thanks again for the deal ordered me one todayNo problem! I got three at $15 a pop... I'm pleased. Now that the firmware upgrade seems to have fixed my touch sensor in TC mode, I'm a happy camper! Hope you got in on the deal for the TCT, it a shame you can only get one a day. I lucked out at the vapefest, and they're local for me. They beat the hell out of my Arctic Tank, flavor, and capacity. Haven't tried the Ni200 Arctic Heads, but the 2.5 ml capacity is a joke, it's gone almost immediately. The TCT with 5.5ml lasts a respectable amount of time.
I've found I can dry the tank, and dry burn the coils, too. I just turn the temp down to around 400 F. I can vape the heads white and dry, then flavor changes aren't an issue. Still prefer my RDA's, but these are pretty damn close.
I haven't found a way and I don't believe there is one. Pm can be done, but it doesn't work for joules.I did the upgrate (upgrade lol). I'm getting 200w and can adjust to 100j but can't figure out a way to save the joule adjustment into one of the memories.
Cheers,
Steve
PS I love the mod, built like a tank and so far works great!
I got mine there. Straight up, no bullshit, arrived in about 4 days I think. Will definitely use them again.Anybody order from ecigarette empire before?
I ended up ordering from them. They sent it out quickly. Now, USPS out of L.A. area...not so much. Should have been here yesterday, and it didn't arrive. Now I got to wait till Monday. Damn I hate USPS!I got mine there. Straight up, no bullshit, arrived in about 4 days I think. Will definitely use them again.
I'm really enjoying this mod. Still working well after the update, I suppose my firmware out of the box didn't like TC and the touch sensor. Hope it keeps working, but I'm not concerned. This is such a more well built mod than the iPV4. I need to get the balls to open my 4 up and clip the balance board. I want to keep it as a beater TC mod for the road, I'm just hesitant leaving it in the car with batteries in it.
Also, my first Smok TCT coil was starting to get some burnt cotton, it was done. I was gonna throw another head on it, but I decided to tinker. I spent the last two hours or so breaking it down and rebuilding it. I got the coil done with 26g Ni200 using my coilmaster 3mm diameter, reading at .065. It's a dual parallel, but I figured I'd just try a single, and being a contact coil with Ni200, I used the coil master to make it perfect. Wasn't too hard, but wicking was what took me so long. I used rayon, took three or four attempts to get it loose enough to have a smooth draw, and not flood. It's difficult to wick. Now it's performing at 20J and 483 degrees, chucking vapor, but lacking a bit in flavor. No flooding or dry hits, though. I'm about done fiddling today, but I'll re wick it again, it needs a tad more. I'm using rayon, so I'm used to being able to really stuff it in, but it's a fine line with these stock heads.
Do those stock Tct ni200 coils use cotton sheets? I heard that Smok will release a DIY Pro coil head for rebuilding .
On another note Vaporleaf.com sent my Tct tank out today, But their age verification that they require really freaks me out. I shouldn't have to supply parts of my social security # and a picture of my drivers liscense. Thats alot of personal info to have to supply that could be hacked or misused.
Exactly I have never had a vendor ask for such detailed personal information before.Screw that noise. I wouldn't want to do that to save 10 bucks.
Exactly I have never had a vendor ask for such detailed personal information before.
They do use cotton. It's a parallel dual coil, didn't even count the wraps, there were a ton, and the wire straightened out during disassembly. I just paid attention to where the leads went, I'm shocked I nailed it coil-wise first time, I.e. No shorts and actually fires. The wicking is tough, I have some work to do to get that down, might have to use cotton instead of rayon. The coil heads are very similar to Arctic Tank heads in regards to the rectangular huge ass wicking. That stays in tact, then it's just cotton around a vertical coil. They have a screen at the top, unlike the Arctic.Do those stock Tct ni200 coils use cotton sheets? I heard that Smok will release a DIY Pro coil head for rebuilding .
On another note Vaporleaf.com sent my Smok Tct tank out today, But their age verification that they require really freaks me out. I shouldn't have to supply parts of my social security # , My previous addresses and a picture of my drivers liscense. Thats alot of personal info to have to supply that could be hacked or misused.
They do use cotton. It's a parallel dual coil, didn't even count the wraps, there were a ton, and the wire straightened out during disassembly. I just paid attention to where the leads went, I'm shocked I nailed it coil-wise first time, I.e. No shorts and actually fires. The wicking is tough, I have some work to do to get that down, might have to use cotton instead of rayon. The coil heads are very similar to Arctic Tank heads in regards to the rectangular huge ass wicking. That stays in tact, then it's just cotton around a vertical coil. They have a screen at the top, unlike the Arctic.
It lasted a week and I don't even know how many tanks, and at least four flavors. That's 5.5ml each fill, and I'm guessing average of two or three tanks a flavor, high VG, and chain vaping. I'm guessing a good 60ml at least was vaped before needing a change. I haven't owned a non RBA tank in over a year, but that seems good to me. I'd have to had re wicked a Kayfun by then. It's still painful to screw on a $3 coil, but oh well.
And they do have a rebuildable base out for the VCT Pro, so it should fit the TCT. I'm gonna order one. A website local to me who has met me before rather than ship has them. Qualityvapor is the site, there are some coupons on vape deals website, too. He's a good dude. Only issue might be fitting enough wraps of Ni200. I have 50ft each of the annealed Ni200 in 26, and 28g along with 100ft of 24g kanthal ordered thanks to the 25% off at Lightning Vapes. I'm very interested in the annealed nickel, it's supposed to be as easy as kanthal.
I hear you on the age verification, but I just had to give a previous address and the total from adding my first and last number of my SSN. No drivers license, I'm ok with what I provided. I wouldn't give my SSN, but everything else is public information, though I respect the hesitance.
Not to derail a bit but how's that goblin mini?? Just ordered one and I'm excited to check it outGoblin mini .09 24g ti build
Sent from my XT1030 using Tapatalk
It's great. Massive airflow holds 3mls. Only shitty thing is the base scratches my mods.
Sent from my XT1030 using Tapatalk
Just looked, and it appears to be for the VCT, not the Pro, so probably won't work. Hope one comes soon.Anxious to see how that RBA deck works out. The Quality Vapor site doesn't have it in the description but other sites specify that this RBA deck is not compatible with the VCT Pro which I thought was the only other compatible tank in their lineup with the TCT but I could be wrong. Other sources indicate the VCT Pro RBA deck is still in development.