1. UP FOR A NEW CHALLENGE? CLICK HERE TO CHECK IT OUT

Smok baby beast coil help

Discussion in 'Factory replacement heads and coils' started by bklynt, Dec 29, 2016.

  1. bklynt

    bklynt Member For 1 Year

    Blog Posts:
    0
    Joined:
    Dec 16, 2016
    Messages:
    111
    I just bought the tank and wanted to know what setting/mode to use the coils in? I read the coils are made of kathenol and should not be used in TC mode, don't know if that's true or not. Thanks for your help.
     
  2. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 2 Years

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,893
    They are indeed NOT TC coils.
    The suggested wattage is printed on them.

    V8 Baby-Q2 Dual Core

    • Dual Coil Design
    • 0.4ohm rated for 40-80W, recommended 55-65W
    V8 Baby-M2 Dual Core

    • Dual Coil Design
    • 0.3ohm rated for 25-45W, recommended 35W
    V8 Baby-X4 Quadruple Core

    • Quad Coil Design
    • 0.15ohm rated for 30-70W, recommended 45-60W
    V8 Baby-T6 Sextuple Core

    • Sextuple Coil Design
    • 0.2ohm rated 40-130W, recommended 70-90W
    V8 Baby-T8 Octuple Core

    • Octuple Coil Design
    • 0.15ohm rated for 50-110W, recommended 60-80W
    V8 Baby RBA Head

    • Two-Post Design - 0.3ohm Clapton
    • Fe-Cr and Nickel-Nichromium Heating Material
    • Includes V8 RBA Exclusive Glass Tube, Screwdriver, and Spare Parts
     
  3. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 2 Years Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    11,945
    this^ but go about 10 watts under the lower recommened amount. so for example the T8 use at around 50 watts. 60 watts for the T6, 35 watts for the X4 and 45 for the Q2
     
    NeoMixer likes this.
  4. challman0308

    challman0308 New Member

    Blog Posts:
    0
    Joined:
    Jan 2, 2017
    Messages:
    23
    Not technically true about going 10 watts under recommend watts, but make sure to prime the coils really well and when you first start heating up the coils start at the lowest watt and slowly work up 2 to 5 watts at a time until you get the vape you like. For example with the Q2 after you prime take a few hits (IN WATTAGE MODE ONLY, no matter what coil) at 40 watts and after 5 hits or so jump up to 45 take 5 hits and so on but the higher you get in wattage take 2 watt jumps instead on 5 watt jumps.
     
  5. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 2 Years Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    11,945
    It's more of a preference guideline of where I feel it works best for me. Everyone will have their own sweet spot for sure so do what works for you :)

    Sent from my SM-G935V using Tapatalk
     
  6. challman0308

    challman0308 New Member

    Blog Posts:
    0
    Joined:
    Jan 2, 2017
    Messages:
    23
    I do agree with you and that's why I didnt bash what you said. But the reason I did say what I did is because it's always good to start a fresh coil at the minimum watts and work your way up to where you like it. And with trying all the coils they have to offer all the coils are very differnt
     
    SirRichardRear likes this.
  7. Lactone

    Lactone Member For 1 Year

    Blog Posts:
    0
    Joined:
    Aug 1, 2016
    Messages:
    115
    I like a warm, not hot, just warm vape. I use the T8s when using SMOK's stock coil heads in my baby beast, and I always vape it right in the middle of the recommended range. I find this gives optimal flavor, and just the right temperature vape for my preference. I find that the flavor stays just as good as you go higher, but as I get toward the top end of the recommended range, the vape just gets a tad too warm for my liking.
     
    NeoMixer likes this.
  8. splash104

    splash104 New Member

    Blog Posts:
    0
    Joined:
    Apr 24, 2017
    Messages:
    7
    Need help here. I'm fairly new to the vaping world and have a question: I just popped a new v8-T6 coil into my big baby beast tank attached to my smok g-priv mod. When I turn it on it says "New coil? Yes 0.3 ohms, No 0.16 ohms" and when I choose "Yes" the coil ohms are automatically adjusted to 0.3 ohms while the mentioned ohms written on the coil itself is 0.2 ohms. I want to know is it ok like this? If not, then how can I change back the auto adjusted 0.3 ohms to 0.2 ohms on the g-priv? Help is much appreciated!
     
  9. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 2 Years Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    11,945
    the mods won't read the coils exactly as printed. it's normal to be a little off. plus the mods themselves add a little resistance. smok mods tend to read a little high and sig mods tend to read a little low. it's normal
     
    splash104 likes this.
  10. splash104

    splash104 New Member

    Blog Posts:
    0
    Joined:
    Apr 24, 2017
    Messages:
    7
    So is it SAFE to let it vape at 0.3 ohms instead of the recommended 0.2 ohms?
     
  11. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 2 Years Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    11,945
    yes as long as it's within .1 of the coil's printed rating it'll be fine. usually say with the .12 ohm coils i put it on my gx350 and it reads .123 i put it on my snow wolf 365 and it reads .11 there will be some small differences. as long as it's small it's ok. My g priv always read a little high but each premade coil isn't going to be exact
     
    gakudzu and splash104 like this.
  12. splash104

    splash104 New Member

    Blog Posts:
    0
    Joined:
    Apr 24, 2017
    Messages:
    7
    Thanks mate appreciate your help! Which tank in your opinion is BEST overall to use with g-priv mod? How is tfv8 cloud beast tank?
     
    SirRichardRear likes this.
  13. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 2 Years Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    11,945
    not really a best per se. it's more whatever suits your needs. all the smok tanks are good, just depends what wattage you find to be a good vape
     
    gakudzu and splash104 like this.
  14. splash104

    splash104 New Member

    Blog Posts:
    0
    Joined:
    Apr 24, 2017
    Messages:
    7
    I only vape in between the recommended lower and higher watts mentioned on the coil itself. v8-X4 is the only coil I have tried so far followed by this current coil v8-T6. Less flavor, more clouds I go for usually.
     
    SirRichardRear likes this.
  15. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 2 Years Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    11,945
    If the baby beast works for you then it's pretty much the best in that watt range.

    Sent from my SM-G935V using Tapatalk
     
  16. yobydnub

    yobydnub New Member

    Blog Posts:
    0
    Joined:
    Oct 30, 2017
    Messages:
    1
    Can you use the V8 Baby-Q2 Dual Core 0.4ohm coils in the new TFV8 X-Baby tank ?
     
  17. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 2 Years

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,893
    The X-Baby coils are larger diameter than the V8 coils so they are not compatible.
     
  18. Grapeapercacin

    Grapeapercacin New Member

    Blog Posts:
    0
    Joined:
    Jan 17, 2018
    Messages:
    3
    Ive been using the Baby X4 since they came out and found the best setting for me for best hit and cloud is as follows
    Watts-55.0
    Ohms-0.172
    Amps-0.238
    And with this setting like is said i get great hits and great cloud and they last quit awhile took me a bit to find a setting i liked its a little bit over the recommend Ohms which is 0.15 but it works for me and they last but you may prefer a different setting id start at 45W and work your way up 5 at a tome till you find something you like hope this helps
     
  19. Yousef3L

    Yousef3L New Member

    Blog Posts:
    0
    Joined:
    Apr 29, 2018
    Messages:
    1
    Hello dears, i need help
    Iam using Q2 coil with baby beast tank on alien 220w mod and i vape with 60 watts and normal mode and i don't taste any flavour like i used to even though i did prime the new coil but no taste (sometimes low taste).
    This is very frustrating ☹️
    Please can someone tell me what is causing the problem?
     
  20. HarleyB

    HarleyB New Member

    Blog Posts:
    0
    Joined:
    May 16, 2018
    Messages:
    3
    I have the same set up and I vape in watt mode at 50 watts and I get all kinds of flavor. 4.5 volts 0.39ohms 11.59 amps and 50 watts even 60 watts you should be getting some flavor. Maybe it's just a bad coil.
     
  21. Newtothis

    Newtothis New Member

    Blog Posts:
    0
    Joined:
    Jun 27, 2018
    Messages:
    1
    Ok I am really new to the vap world and could really use some help. I just ordered and received my mod. Its the smok t priv it comes with tfv8 big baby beast coils are v8-s 0.2 ohm dualcoil and V8-D 0.15 quadruple coil head. My problem is i can't seem to find either one of those to buy replacements can someone please lead me in the erivht direction?
     

Share This Page

Close This Message