I found them overnight looking for other gauges after seeing your post.
Couldn't find confirmation that they ship to the US.
I take it that's a yes?
Become a Patron!
HCIGAR VT133/VT167 Dual 18650 DNA200/250
- Thread starter Wingsfan0310
- Start date
I found them overnight looking for other gauges after seeing your post.
Couldn't find confirmation that they ship to the US.
I take it that's a yes?
Yes they do. I get all my TC wire from them. Shipping is quick for over the pond and they take paypal.
ere you go. They ship fast also 5-10 days. It's not springy like the 28awg. No rubber band on this roll... 5.18$ for 330 feet. I have a discount code, let me see if i can find it. The also have
Clapton, Tiger, Hive, Alien & Quad Wires. Look around the site
http://www.wireandstuff.co.uk/products/430-Grade-Stainless-Steel---Magnetic.html
they do list international shipping - can't seem to change the currency tho.. will fiddle a bit and see ... Thank you for the Info!
So feels that way!
now just have to get the Dl's rolling for escribe etc..Man, that's certainly a positive turnaround!!! My o-rings on my Avocados are all way to tight
Glad to hear you have some gear to tinker with over the weekend!
ty ty !
yeah was good day.. should pick up a lottery t. Yeah good to have tight rings.. the 24 i just got seems better than my org 22. what a pita to measure for replacement .. lolOh and @Wingsfan0310 ...
So far, so good on the Sammie battery csv.
I've made it through the dreaded 60-30% and am waiting to see where the weak/low batt alert shows up... I'm down around 15% now.
Not sure how the HE4s will do and I won't be swapping files with the batteries but this is miles better already.
Thank you.
So far, so good on the Sammie battery csv.
I've made it through the dreaded 60-30% and am waiting to see where the weak/low batt alert shows up... I'm down around 15% now.
Not sure how the HE4s will do and I won't be swapping files with the batteries but this is miles better already.
Thank you.
Twist up a piece of 430, cut it in half and twist those pieces together again in the reverse direction. Makes a nice 4 strand chain, wrap that on 3.5mm or 4mm wick and enjoy!I'm back to frustrated with the vape so I'm going to yank the coil and try something lower that I can throw some wattage at. This thing shows the Last Power average below 20w half the time even with the temp cranked to 480 (wicking loses it much higher)... it is 1.1 ohm after all. Though I've got a smaller 1.1 also in 430 in the Lil' Serpent and it just plain chucks. Go figger.
I'm torn between trying a Notch coil... or another shot at the 430, but around 0.6 or 0.7.
That's not a lot of decent size wraps... quite a span with the V posts.
Or I'll kick it's ass with a fat 24g 316 like the Bachelor.
And I popped the Stumpy Cap on the 'Mizer. I love it.
I like the proportions of the medium short tanks better on the 133s as well.
They look sharp... and I'm getting them freaking color co-ordinated.
Moonshot!
Who else has one? Flavor to the extreme with dual fused Claptons!
Just on the WeeLeaf Pico for the picture.
Who else has one? Flavor to the extreme with dual fused Claptons!
Just on the WeeLeaf Pico for the picture.
they also have a special going on buy 5 wires for the price of 4. They also accepted the discount code
I don't have a lot of this sample, but I think I'll be getting more 28g just for twisting.
Doubling it again sounds interesting, I've seen you mention it before.
It's an embarrassment of riches. The Blue and Yellow showed up today. Here they are with their brothers
5 of a Kind
Cheers,
Steve
Last edited:
It's an embarrassment of riches. The Blue and Yellow showed up today. Here they are with their brothers
Cheers,
Steve
Very Nice Steve
Last edited:
That's some collection fokker. Lol.s:
It's an embarrassment of riches. The Blue and Yellow showed up today. Here they are with their brothers
Cheers,
Steve
s:Sent from my SAMSUNG-SM-N915A using Tapatalk
That's my night time mod so I don't lose it in the dark.Did they throw in a pair of knock-off Oakley's?
Damn, that yellow is... bright.
Cheers,
Steve
Let's see what's all this hype is about
All 5 of my VT133 are home now also
Nice! Here's what comes to mind looking at those boxes.View attachment 55977 All 5 of my VT133 are home now also
Edit What do you think of the Supreme? I have a very flavorful Merlin I can trade you for it.
Sent you a quick pm. I let you know as soon as you answer it
Edit...Steve...Quick question on the supreme sir. I put 3mm 26/32 SS Clapton coils in it. Where should i start with the juice flow control? Looks like 6 marks. Wide open?
Edit...Steve...Quick question on the supreme sir. I put 3mm 26/32 SS Clapton coils in it. Where should i start with the juice flow control? Looks like 6 marks. Wide open?
I replied to the PM, I've never used Claptons in mine so I'm not positive but I'm thinkimg between 4-6. Maybe @Infinite1 has run Claptons (Slowhand) in his.Sent you a quick pm. I let you know as soon as you answer it
Edit...Steve...Quick question on the supreme sir. I put 3mm 26/32 SS Clapton coils in it. Where should i start with the juice flow control? Looks like 6 marks. Wide open?
Cheers,
Steve
Nice! Here's what comes to mind looking at those boxes.
Edit What do you think of the Supreme? I have a very flavorful Merlin I can trade you for it.
A Merlin and 30.00$ and you have a deal
I've run claptons in the same JFC position as standard coil builds. I usually start fully open (98% VG) and work down to find the sweet spot from there. I think it all depends on your juice really... I can say that with my super maxxx VG that I blend, I rarely have JFC fully open.
Hope that helps any
Sent from a random device, most likely a LG V10
You're in for a treat!
I have 26SS/36K1 in mine w/70/30 PG/VG. 35W @ 500 and have run it between 3.5 and wide open.Sent you a quick pm. I let you know as soon as you answer it
Edit...Steve...Quick question on the supreme sir. I put 3mm 26/32 SS Clapton coils in it. Where should i start with the juice flow control? Looks like 6 marks. Wide open?
Seems awesome to me, but YMMV.
I set it at 4 for now. No dry hits @ 65 watts. This rta drinks the juice... thank god for DIY juice! 2nd tank the flavor is starting to come through Should have gave her a quick bath 
Should have gave her a quick bath
I posted that picture with all 5 of mine in it to help you guys out with your significant other (wives). If they start complaining you can just show them the picture and say; "At least I'm not as bad as that guy!"
Cheers,
Steve
Cheers,
Steve
Thanks...What setting are you using in TC for your SS clapton coils?
You did.... Thanks for the advice! I have it set to 4 with 90% vg and she's vaping like a dream @ 65watts
LmaoI posted that picture with all 5 of mine in it to help you guys out with your significant other (wives). If they start complaining you can just show them the picture and say; "At least I'm not as bad as that guy!"
Cheers,
Steve
Sent from my iPad using Tapatalk
Well you guys wasn't kidding about how nice this supreme tank is . It's perfect in all the right places .
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I still say you need a 6th, just to even things out.
It's an embarrassment of riches. The Blue and Yellow showed up today. Here they are with their brothers
5 of a Kind
Cheers,
Steve
Sent from my SAMSUNG-SM-N915A using Tapatalk
For those who wanted to know about the Mage tank . Good quality tank . Huge on the flavor . Can't adjust anything but airflow . And if you are older and have worn out body parts like myself . Find your happy place before you install the chimney section . Rotflmao
Sent from my iPhone using Tapatalk
I had nothing but good stuff to say about my Supreme. It never leaked, great flavor, clouds, etc. until today. I loaded it up with 7ml of my favorite juice and went out of the door to town. 30 minutes later I pulled out my Supreme from my pocket and it was bone dry. Looked at my pocket and it had 7ml of juice in it. And I had nothing to vape. 
Hate that.I had nothing but good stuff to say about my Supreme. It never leaked, great flavor, clouds, etc. until today. I loaded it up with 7ml of my favorite juice and went out of the door to town. 30 minutes later I pulled out my Supreme from my pocket and it was bone dry. Looked at my pocket and it had 7ml of juice in it. And I had nothing to vape.
Sent from my SAMSUNG-SM-N915A using Tapatalk
What do you think the cause was Bill? Temperature change maybe? Wicking got old? I've never had mine do that (thankfully).I had nothing but good stuff to say about my Supreme. It never leaked, great flavor, clouds, etc. until today. I loaded it up with 7ml of my favorite juice and went out of the door to town. 30 minutes later I pulled out my Supreme from my pocket and it was bone dry. Looked at my pocket and it had 7ml of juice in it. And I had nothing to vape.
Cheers,
Steve
I created one for a Crius w/the TCR from steam-engine for 316L.
You can also just use the 316L profile that came w/the DNA.
Both have worked fine for me.
That's very strange indeed. I've never had a Supreme leak. Up until this post, I did not think it was possible
. I does really sound like a wicking issue. Just thinking of the physics of the way the rank is built/wicks. With the amount of cotton tails in the well, the rails would have to be up away from the bottom to allow juice to continue to flow. My thought, but stranger things could happen. Sorry that happened.
Sent from a random device, most likely a LG V10
Well the one thing that bothers me about top fill is that these tanks needs a vacuum at top to keep gravity from emptying the tank out the air holes by gravity. And any tiny pinhole leak in the top and the whole tank will empty. The Supreme is the only top fill tank that I never had a problem top filling. The Boreas for example, the build is virtually the same, vape, flavor, and just about everything is the same as the Supreme. But the flow control isn't as tight as the Supreme and can sometimes leak when you top fill.That's very strange indeed. I've never had a Supreme leak. Up until this post, I did not think it was possible
My thought, but stranger things could happen. Sorry that happened.
Now when the Supreme or anything else like these, when placed on the side can loose vacuum. Once that happens, gravity just drains it right out the air holes like a drain. That is all it was from what I figure. Nothing wrong with the wicking or the build or anything. When I got home I just refilled and it is back to normal once again. No leaks or anything. Just don't lay it sideways and bounce it up and down and things will be fine.
Strange indeed. Thanks for the tip!!! Can't say that I've laid mine down on its side with enough movement to cause it. Glad you're back up and going!Well the one thing that bothers me about top fill is that these tanks needs a vacuum at top to keep gravity from emptying the tank out the air holes by gravity. And any tiny pinhole leak in the top and the whole tank will empty. The Supreme is the only top fill tank that I never had a problem top filling. The Boreas for example, the build is virtually the same, vape, flavor, and just about everything is the same as the Supreme. But the flow control isn't as tight as the Supreme and can sometimes leak when you top fill.
Now when the Supreme or anything else like these, when placed on the side can loose vacuum. Once that happens, gravity just drains it right out the air holes like a drain. That is all it was from what I figure. Nothing wrong with the wicking or the build or anything. When I got home I just refilled and it is back to normal once again. No leaks or anything. Just don't lay it sideways and bounce it up and down and things will be fine.
Sent from a random device, most likely a LG V10
I might be interested in a silver now. You looking share a tip or are you offloading?
Sent from a random device, most likely a LG V10
I could use red one if you know where they're available at a decent price.
lemonpotty
Member For 3 Years
Just got my black VT133 from vapenw. Love everything about it but unfortunately there's a gap with my Serpent Mini on it.
Well, crap.
Here we go with VNW's infamously poor CS.
They told me if it didn't affect performance, they wouldn't fix it. As other attys do seat flush, and I have another, I let it go.
But if you push them and get any results, let us know.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Is that a statue or Jesus in the background? He blessing your mods
It's an embarrassment of riches. The Blue and Yellow showed up today. Here they are with their brothers
5 of a Kind
Cheers,
Steve
Fixed mine.
Unlike say... the RX issue, this one has what appeared to be full travel (nice to have another to compare) so I just got Medieval on the little fucker.
Figuring it was just crunchy threading... I gripped an iSub and just muscled through it.
And I had to crank on it pretty hard. Not cool... not cool at all.
But... all's well, mod's fine, Jim's happy.
If the 510 pin moves freely, and deeply, you may want to give it a go.
Those are some wastrel children that have invaded Steve's house... they're in most of his pics.
I told him to stop feeding them and maybe they'll go away... or maybe that was the grandkids.
I REALLY NEED A YELLOW COVER. sorry for yelling anyone know if anyone is selling the yellow again yet
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk