Thanks for that @CthulhuMod
. It's really counter-intuitive for me, thought doing that would just push more juice into the chamber, but I'll give it a try when i get mine.
Become a Patron!
Cthulhu MTL RTA 24mm *NEW*
- Thread starter Ramsay Bolton
- Start date
-
- Tags
- cthulhu mtl mouth to lung rta
Thanks for that @CthulhuMod
. It's really counter-intuitive for me, thought doing that would just push more juice into the chamber, but I'll give it a try when i get mine.
Hi, thanks for ordering our product. our technician had tested and many customers had tried, and it worked. PS. adding more cotton to the wick will work too.Thanks for that @CthulhuMod
When I watched that video, I was concerned that Phil B.seemed to under wick because he trimmed it up so much, and then he had flooding issues. It seemed connected to me, but I didn't say anything because he's Phil B. and I've only been using RTAs for 5 months. What does anyone else think?
Just had another look at the vid ... You have a good point @all_thumbs
Looks like there may be a clear path for juice to get by at the sides of the first wick after he pushed it into the cup, before vacuum took hold. It'll be interesting to hear what folks have to say about this puppy after we start getting our hands on them.
Wick ends should be like this not the diamond shaped tip cut in the video. That wick end cutting
technique doesn't work well on every tank on the planet and he shouldn't assume it does.
Last edited:
Thanks!Be keeping my eye out for this one, not enough MTL tanks, but seem to be catching on again, thank goodness
It can support restricted lung hit with dia. 4mm air hole.I know this sound stupid, but is this tank tolerate DL?
i kinda love it at first sight (might get one actually
I gotta get me one those. Looks real nice.All done with a 2.5 mm 1.5 ohm clapton coil, is easy to build and work on
Got the middle air grub inserted and is good flavor, got a little seepage, but think down to my wicking being a bit thin, might try a 3mm coil instead
Sent from my GT-N8013 using Tapatalk
All done with a 2.5 mm 1.5 ohm clapton coil, is easy to build and work on
Got the middle air grub inserted and is good flavor, got a little seepage, but think down to my wicking being a bit thin, might try a 3mm coil instead
Nice picture! could we re-post it to our fb page? thx
More pics
Nice pictures Ramsay, how well is it performing for MTL ?More pics
Not my pics!.
My package was just released by customs. Won't see my MTL tank for at least a week.
Curious to hear how this compares with the Digiflavor Siren.
do you receive it ?
Gonna give a friendly nudge, this is not a vendor thread, just a reminder on the vendor rules we have here.
Thanks for remind.
Mtl is love. My best rtas are mtl
chriskahmar
Member For 4 Years
Finally here!
Waiting for your review Ramsay.
Waiting for your review Ramsay.
Working on it! Like everyone else, been busy with the holidays.
So far, I've only tried out the MTL tank with no insert and with the largest diameter one.
I'm liking it so far and I'd describe the vape as smooth, but it hits!. Have to set aside some
time to test out the smaller air hole inserts.
Might seem odd, but the tank seems to work better with fluffier cotton like Koh Gen Doh.
The Muji that I normally use seems a bit denser and doesn't work as well with this tank.
All subjective of course!.
NO flooding or gurgling! I don't over saturate the coil wick when priming.
Other than that:
- Filling near the top poses no problems. Wouldn't mind an extension ala the Atlantis EVO Adapter Kit to
raise/increase it's capacity
- You can achieve a tight draw (Based on MY perception) even with the largest insert and an AFC adjustment
- Wick ends have to be flat, well fluffed up and the tips barely inserted into the juice wells. The wick shouldn't
fit too tightly inside the coil
- No wicking issues with 60 or 70% VG juice
- Taller drip tip would be nice, but that's personal preference and you can use your own
- The AFC section is removable and I would suggest giving the rubber o-ring a wipe with VG
or a non tank cracker E-Juice
That's it for now!
On the way to me by Monday or Tuesday I have a Cthulhu MTL, a Merlin Mini and the weird clone-based KF Mini V3 plus, (a 24mm Kayfun Mini v3 clone which isn't a clone because SvoeMesto never made it in 24mm?)
I'll write a MTL comparison post as soon as I get some time on them all, but will post first impressions for the Cthulhu here first.
I'll write a MTL comparison post as soon as I get some time on them all, but will post first impressions for the Cthulhu here first.
My Cthulhu MTL arrived and it has a short! Full disassembly and reassembly did not resolve the problem. Happens with or without a coil in place. When chamber is screwed onto base, it reads as .02 Ohm. I'm disappointed but I know problems occur in manufacturing like this. This is basically the first batch, right?
I emailed Cthulhu to see if they will help me directly. I'd rather not deal with Fasttech.
I emailed Cthulhu to see if they will help me directly. I'd rather not deal with Fasttech.
They responded to my email. They are going to send parts. Great customer service.
Thanks for posting it.
More detail about the MTL:
Our team receive 20+ suggestions about making a mouth to lung RDA in the past 6 months.
Dave L (Cthulhu designer) start the project at September. We do research on our Facebook page, vaping forum, and reddit ECR.
We received suggestions as below:
Kayfun V5 style deck (best single coil deck);
Condensed chamber;
Air hole size selectable; (Airflow is the key for MTL)
Shorter chimney;
After modifying the sample three times, we finish the project. Our Cthulhu MTL RTA is released. It can support true MTL and a restricted lung hit.
Cthulhu MTL RTA comes with kayfun V5 style single coil deck (PS. We are working on dual coil deck now, and it is optional for customer).
Dia. 14mm condensed chamber, and the chimney using Cthulhu two-step-design to improve flavor.
3 swappable air flow resisters (Dia. 1.2mm, 1.6mm, 3mm) to make the air hole size selectable. (customer can select nice restricted airflow for true MTL, and they can select bigger airflow for restricted lung hit)
Cthulhu MTL comes with two drip tips (Dia. 4mm and Dia. 2mm).
Features:
3 swappable air flow resisters in the tank (Dia. 1.2mm, 1.6mm, 3mm). Dia 4 mm air hole if we remove air flow resister.
Two drip tips (Dia. 4mm and Dia. 2mm).
Adjustable juice flow.
Adjustable air flow.
Short Cthulhu two-step-chimney, improving flavor.
Food grade 304 steel.
3ml capacity.
Easy top refilling.
Product video:
i need to know the screws size for this tank please