will be used on the stock cap with my CSMNT ultem 510.
You have one of those tiny 510 drip tips also In black?
Similar to this one?
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
You have one of those tiny 510 drip tips also In black?
Similar to this one?
Hang on a sec ill see what i can come up with
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
The tip is prob to small for ya and the ring has some play but when on a mod and tight the ring dont move
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
The tip is prob to small for ya and the ring has some play but when on a mod and tight the ring dont move
Sent from my SM-G950U using Tapatalk
You have a tiny black tip? that BR looks like its a tad more than 22 can see the shadow it casts on the left of the haku Cap
EDIT: is that the B2K Ultem ring? Thought those were 23 if I recall.
Yea its a tad bigger there is a small gap it wiggles a little when not on a mod but on a mod it dont move but there is a gap im not that ocd like some of u bonks lol
Sent from my SM-G950U using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Lucy would something like possible work i know its not got a screw head , but if it threads in
Fasttech parts for vapor giant mod , has top an bottom plated silver screws
Just a thought ?
Sent from my ONEPLUS A3003 using Tapatalk
https://m.fasttech.com/products/9630803
Is there any chance you could see if it actually threads into the button of a CV?
I will not be going with your button idea on this one, as it is the brass one and I don't like how silver and brass look together on the outside
It would be under consideration for future remodels on my aluminum ones possibly
I need to get this one decked out and functional first though
Finally have a long sought after mod on its way to me...
Anyone know where i can get replacement buttons for 67 occultus noctum? Or at least the size?
Thanks in advance
Oh yeah, hail Satan
Anyone know where i can get replacement buttons for 67 occultus noctum? Or at least the size?
Thanks in advance
Oh yeah, hail Satan
Do both!
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
And how do you propose I do both at the same time?
I'm out of practice being a mom, lol
Finally have a long sought after mod on its way to me...
Anyone know where i can get replacement buttons for 67 occultus noctum? Or at least the size?
Thanks in advance
Oh yeah, hail Satan
Bar-aBrume...
You can always talk to your buddy Raphael since that is his mod
Should use the same buttons as the Mojo
You can always talk to your buddy Raphael since that is his mod
Ha ha yeah... I've hurt his feelers and he doesn't wanna be fwends anymore
I'll check bar a brume - thanks
Voice control on your phone?
CJ
VU Webmaster
Staff member
VU Senior Leadership
VU Senior Administrator
VU Administrator
Senior Moderator
VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
Well.. finally got the bottle I was looking for. Anyone have any Vikset or any other Haku cap in Black Delrin? 
Never normal has 11mm and 12mm buttons on their site... If only i knew the size.Bar-aBrume...
You can always talk to your buddy Raphael since that is his mod
Should use the same buttons as the Mojo
Or if someone would ask the 67mods FB group I'd appreciate it
If it's the same as Mojo, you can print your own...but I don't know the 67 models, except for Neo...
Finally have a long sought after mod on its way to me...
Anyone know where i can get replacement buttons for 67 occultus noctum? Or at least the size?
Thanks in advance
Oh yeah, hail Satan
Thanks for that tip. Actually looking for acrylic or ultem...
Wish it had the big ass neo button, but think it's much smaller.
Thanks anyways
All I have is the clear ones from FT, but you are welcome to one if you want it.Well.. finally got the bottle I was looking for. Anyone have any Vikset or any other Haku cap in Black Delrin?
View attachment 105694
Did I buy the right stuff for my contacts?
Sent from my LG-D850 using Tapatalk
Sent from my LG-D850 using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Did I buy the right stuff for my contacts?
Sent from my LG-D850 using Tapatalk
Yes - just needs the teeniest drop for all the contacts
Did I buy the right stuff for my contacts?
Sent from my LG-D850 using Tapatalk
Any of the DeoxIT stuff is great... I use the Tiny Deoxit gold with applicator brush thingymabob
Still have 3/4 of it after 18months lol
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
After cleaning - it improves conductivity and helps prevent arcing
Lets take the Molly as the example.
When I break the Molly down, clean the copper...I put a tiny dab on the nut that secures the top contact in place... I also put a tiny dab on the small contact nut threading, then a tiny dab where the L contact hits the Small contact nut and then a tiny dab where the batteries contact the contacts.
Do the same with the Neo Mara...although I don't break that down like the copper... just a quick wipe where contact is made then a small dab
Gotta grab me some
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Are notch coils ok to use in squonks? I ordered some from FT over a year ago and they disappeared until last night when I found them buried in my desk. I thought what the hell and put one in my dpro, pulsed it a few times then wicked it up. Popped the atty on the RSQ and running tc at 420 degrees and it's a fantastic vape. What's the deal with notch coils?
Sent from the Far Side
Sent from the Far Side
What’s up bonkers, changed everything I disliked about a coppervape and thought I’d share. #1 I’m a bit higher wattage vaper than most squonkers and the brass plated steel spring in the CV would get hot and also caused arcing to batteries at lower builds-solution made a new spring out of thicker solid brass. Handling a .13 dual coil build like a tube mod now, no arcs or heat.
#2 & 3 swapped out the 510 for a MM 510 and installed a lost vape bottle, squonks like a dream and hits way harder
The MM 510 screws right in to the top no problem, but sticks down a bit for the switch once the atty is screwed down, so a 22mm washer and an O ring was added.
Excellent lucy was doing something similar I believeView attachment 105714 What’s up bonkers, changed everything I disliked about a coppervape and thought I’d share.
#1 I’m a bit higher wattage vaper than most squonkers and the brass plated steel spring in the CV would get hot and also caused arcing to batteries at lower builds-solution made a new spring out of thicker solid brass. Handling a .13 dual coil build like a tube mod now, no arcs or heat.
#2 & 3 swapped out the 510 for a MM 510 and installed a lost vape bottle, squonks like a dream and hits way harder
The MM 510 screws right in to the top no problem, but sticks down a bit for the switch once the atty is screwed down, so a 22mm washer and an O ring was added.
Sent from my ONEPLUS A3003 using Tapatalk
My self i just did the Noisey Cricket V2 into Sqounkers , an just awaiting dinky plus bottles for few more ml capacity than just dinky
Now im awaiting one i picked up from sqounk Trader to ship hopefully tomorrow
A stabwood Sqounker switchfet
So i can then plan my own build of one ,
Last edited:
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Did the same thing Friday night - what a difference!
Been wanting to pimp one of these since I got my first one
Can you show us the underside?
I had to add a spring to the button on the topside to compensate
Will also be adding a pure silver firing pin in the near future
Just talked about this yesterday. I've got the 510s and an extra bottle just trying to figure out how.View attachment 105714 What’s up bonkers, changed everything I disliked about a coppervape and thought I’d share.
#1 I’m a bit higher wattage vaper than most squonkers and the brass plated steel spring in the CV would get hot and also caused arcing to batteries at lower builds-solution made a new spring out of thicker solid brass. Handling a .13 dual coil build like a tube mod now, no arcs or heat.
#2 & 3 swapped out the 510 for a MM 510 and installed a lost vape bottle, squonks like a dream and hits way harder
The MM 510 screws right in to the top no problem, but sticks down a bit for the switch once the atty is screwed down, so a 22mm washer and an O ring was added.
Sent from my Nexus 6P using Tapatalk
Beautiful work man, hell yeah, v2 is a great mod.Excellent lucy was doing something similar I believe
Sent from my ONEPLUS A3003 using Tapatalk
My self i just did the Noisey Cricket V2 into Sqounkers , an just awaiting dinky plus bottles for few more ml capacity than just dinky
Now im awaiting one i picked up from sqounk Trader to ship hopefully tomorrow
A stabwood Sqounker switchfet
So i can then plan my own build of one ,
Some great ideas, got called out to work I’ll snap some pics of the inside when I get home.
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I did finally sand down my locking nut to fit inside the recess - the 510 is holding very well now
Am ordering a sheet of .999 silver to make a new firing pin - but it's pretty sweet as is
Nice would love to see how you done it , its a great mod just a little inconsistent on firing got one when they where first made ,
Sent from my ONEPLUS A3003 using Tapatalk
A Narca drip from Fastech should be just the ticketwill be used on the stock cap with my CSMNT ultem 510.
You have one of those tiny 510 drip tips also In black?
Similar to this one?
Sent from my Redmi Note 4 using Tapatalk
Get my shop going again I am going to play with electroplating....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
This is exciting!!!
Yep might be a market for silver plated Coppervape contact strips and screws?
As long as I do not have to do it on FB....
As long as I do not have to do it on FB....
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
CJ
VU Webmaster
Staff member
VU Senior Leadership
VU Senior Administrator
VU Administrator
Senior Moderator
VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
Such a kind person, how much? Are they acrylic? If so keep it, my juice destroys anything acrylic
Not to brag but I just found out;
Last edited:
I'm waiting for delivery of a Coppervape I ordered from FT last month. The FT listing says..."Coming with silver plated contacts, the voltage drop is close to zero."
https://www.fasttech.com/products/9629098
They’re talking about the OG Coppervape:
https://www.fasttech.com/products/0/10026107/5683100-coppervape-bf-18650-mechanical-mod
Sent from my iPhone using Tapatalk Pro
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
That is the V2 - we are working on improving the old style ones that came with brass
Coppervape BF 18650 Mechanical Mod
Maybe meld the 2 , silver copper contacts in the metal v1 ? ,
Sent from my ONEPLUS A3003 using Tapatalk
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Eh - I'm going to buy a sheet of fine .999 silver - though I finally did break down a get a V2 during CNY sale - and its still on the way, lol
Speaking of which, what is the thickest silver you guys think I could get away with?
Tbh though most of the problems a lot had was between the top an Bottom not contacting as good ,
thoese silver plated rods or what ever between top an bottom of mod where kept clean in fired ok ,
You could buy the replacment contact strips an send them to be plated that would be cool , since only cheap ,
But im sure if these could me made for say the MM 510.
out of bel copper shaped to sizes ect
Of mm 510 modded parts
Then have them plated they would sell to many owners an many them really happy
As one of the most soild mods out there for price ,
Sent from my ONEPLUS A3003 using Tapatalk
thoese silver plated rods or what ever between top an bottom of mod where kept clean in fired ok ,
You could buy the replacment contact strips an send them to be plated that would be cool , since only cheap ,
But im sure if these could me made for say the MM 510.
out of bel copper shaped to sizes ect
Of mm 510 modded parts
Then have them plated they would sell to many owners an many them really happy
As one of the most soild mods out there for price ,
Sent from my ONEPLUS A3003 using Tapatalk
Thanks all!
I just could not be sure which Coppervape(s) was being referred to.
There are two types of electroplating solutions, the cyanide based and non-cyanide. If you're going to work in a shed, the non-cyanide would be preferred. Since you're about to look into it, consider silver plating followed by rhodium plating, this way there will be no oxidation. Look at Rio Grande Jewelry but I gotta tell you the solutions are a bit pricey.