APIWATW Challenge- Closes 01/31/2019 (15 Prizes Available)

[JuicyLucy]

I'd thought we had all the issues, but there's still one outstanding, if I'm not mistaken.

Provari doesn't fit 510s. Even though HoH did make a Kabuki with a P3 pin, the pin on this Kabuki does appear to be 510 from what I can see. So P3 adapter is needed.

The older ProVape mods were 510, P3 was a much later adaptation

And yes, there is still an outstanding issue

 

[nadalama]

The older ProVape mods were 510, P3 was a much later adaptation

And yes, there is still an outstanding issue

Ok.. Learn sommat new every day. Thanks Lucy!

Gorgeous mod, btw.

 

[f1r3b1rd]

Y’all have me feeling like a dinosaur. Lol


The crop circles was the provari v2, and the last one made with a standard, non-adjustable 510. it tapered to a 17mm tip; that needed a beauty ring for most atomizers to sit flush- or - close to flush.
The versions with a p3 all had a 2 piece 510 adapter so that regular 510s would work fine on it. Provape was trying to get the community away from the 510. Was a great idea but ...

 

[JuicyLucy]

 

[nadalama]

One more try. Provari will not fire the coil shown. If that coil was a Nautilus or Triton Mini coil at or above 1.2 ohms, it would work, but the Atlantis coils are sub-ohm only and won't work either in the Kabuki atomizer or on the Provari mod.

 

[JuicyLucy]

One more try. Provari will not fire the coil shown. If that coil was a Nautilus or Triton Mini coil at or above 1.2 ohms, it would work, but the Atlantis coils are sub-ohm only and won't work either in the Kabuki atomizer or on the Provari mod.

It was already solved by ~Don~, the coil would not actually fit in the Kabuki, though it is a 1.8 coil

This challenge is trickier that it would seem at first blush

 

[nadalama]

It was already solved by ~Don~, the coil would not actually fit in the Kabuki, though it is a 1.8 coil

This challenge is trickier that it would seem at first blush

Oh, it's that 1.8 ohm Triton coil. I forgot about that one. Thanks again Lucy.

 

[choderfett]

The use of CBD could have possible side effects including nausea, vomiting, diarrhea, bloating and dizziness.
There are also dangerous chemicals are found in some popular CBD products...

 

[jwill]

APIWATW #16 @JuicyLucy Edition

Build Info-
Mod- Provari
Atomizer- House of Hybrids- Kabuki RTA
Battery- Sony VTC5
Eliquid- MCT CBD 800

Issues-
1. Drip Tip is 810, Kabuki is 510 (Vape Fan)
2. Triton Coil (Don)
3. Coconut Oil is no bueno to vape (Huckleberried)
4. Wrong Battery type (Huckleberried)
5.

Subjective- Say something nice about someone.
1. Flattery gets you everywhere, there is a whole team behind this challenge and it wouldn't be the same without you all. I just get to be the pretty face this month. (88ArDen88)

 

[jwill]

The last one is a doozy. It will require digging up some dinosaur bones.

 

[Vape Fan]

The last one is a doozy. It will require digging up some dinosaur bones.

ummm....
Duckbill Platypus !

 

[jwill]

ummm....
Duckbill Platypus !

Close.

 

[choderfett]

The last one is a doozy. It will require digging up some dinosaur bones.

ummm....
Duckbill Platypus !

I'm scratching my head here..
geez, I have a lot of dandruff..

 

[OmagaWright]

ummm....
Duckbill Platypus !

Perry the Platypus! Heh heh, loved watchin Phineas and Ferb

 

[jwill]

Man, I know this one was before a lot of folks times. When the Provari's hit I always thought, "who would spend that much on a vape". Carto's were cheap and plentiful, cigalikes were cheap and plentiful. Who knew. This was like 2011 right @JuicyLucy ?

 

[nadalama]

2011 was when I started vaping, but I never even considered spending that much on a vape.

 

[f1r3b1rd]

The crop circles (p2) and a kayfun are what got me off cigs. Over the years I had p2, p2 mini, p3, radius 60wtc and their Procyon 50w tube. I sold them all when they went oob, but, all of them still worked and looked like new.

 

[Huckleberried]

I have one, I think it's a 2.5 or something. A member I haven't seen in years sent it to me because he never used it after box mods came out. I used it a few times, but it was so heavy (at the time I was used to egos and an istick 20). It was a weird purple color. I sanded it, lol. It just sits in a box.

 

[jwill]

The last one on this can be seen in the cherry bomber edition early on in the month.

 

[nadalama]

Never mind...

 

[MrMeowgi]

Not really a misfire but a stops firing issue. Not sure which version this is. I've seen a few mentioned here. P2, p3. But that's what I dug up

 

[Letitia9]

Hint
What's missing?

 

[Vape Fan]

# 16

 

[nadalama]

Hint
What's missing?
View attachment 130179

We haven't seen the 18500 battery!

 

[Letitia9]

Literally what is missing from the picture?

 

[nadalama]

Button top batteries are required in the Provari.

 

[Letitia9]

 

[Letitia9]

Can't believe no one mentioned how well the coat went with the setup.

 

[JuicyLucy]

# 16

A few notes and words of caution from this challenge:

First of, that CBD juice is totally sold as a vape juice with coconut oil

How the battery got fried: It was installed in a Little Orca, and was sitting on my nightstand, as I will not use a mech or a squonker in bed
Wake up hearing a hissing noise

A that lets us live with them knocked the mod off the nightstand and onto the heater vent on the floor. It knocked the door off and the battery and contacts were touching the metal plates on the vent cover, the thing was making a lot of noise and woke me up, thankfully

 

[Huckleberried]

A that lets us live with them

I, too, am a servant.

 

[f1r3b1rd]

#17
The @KingPin! edition

 

[choderfett]

#17

• Lostvape Furyan is a single 2X700 squonk mod (squonk bottle is in the mod)
• Squonk pin not installed in deck

 

[Huckleberried]

The wrap on the 30Q looks jacked.

 

[~Don~]

I mean it’s good practice to have your wraps in good condition, but this one is meh.

More technical: it’s the negative side of the circuit and the rolled edges are still protected, and so is the rest of the can...I’d still hit it with a lighter to tighten it up...but I’d also not be afraid to use it as is til I did have a heat source to remedy it.





Sent from my iPhone using Tapatalk

 

[choderfett]

coil looks like its touching the bottom of the deck..

 

[choderfett]

obvious one but Deathtrap RDA 24mm has no wick and liquid..

 

[Doomsday Vaper]

#17
30Q is 15abattery (20a under 75°c), not enough for the jungle gym coil.<---<<< not sure what to call it.

 

[Vape Fan]

Coil appears to be of too low resistance for 30Q in a mech

edit-Doomsday beat me by a hair

 

[nadalama]

Wrap is torn on the 20700, too, on the end closest to the bottom of the pic. Yeow!

ETA: Like that deck.

 

[Vape Fan]

Wrong bottle

Maybe it's upside down, but I dont think so, I think wrong bottle

 

[KingPin!]

APIWATW #17 KingPin! Edition

Build Info-
Mod- Furyan mechanical Squonker
Atomizer- 24mm Deathtrap RDA
Build - 0.12ohm chunky bastard
Battery- Ijoy 5 legged 20700, Samsung 30Q
Eliquid- N/A

Issues-
1. Torn wrap 20700 (Nadalama)
2. Coil touching the deck (Choderfett)
3. Squonk Pin not installed (Choderfett)
4. 30q does not have the CDR to support the coil resistance safely (Doomsday Vaper)
5. No wick or liquid (Choderfett)
6. No 18650 adaptor (Choderfett) risk using torn 20700
7.
8.


Subjective- maintanence
1. 30Q has seen better days (huckleberried) needs heating back down and it’ll be fine (~Don~)
2. Dirty contact = crap performance (vape fan)

 

[Vape Fan]

Battery cap could be cleaner
If that's an indication, maybe take it part and clean.

 

[KingPin!]

Battery cap could be cleaner
If that's an indication, maybe take it part and clean.

that’s maintanence number 2 completed

 

[KingPin!]

holy crap you all smashed this one.... we better get another one ready

 

[KingPin!]

3 more main issues to get

 

[choderfett]

The wrap on the 30Q looks jacked.

APIWATW #17 KingPin! Edition

Build Info-
Mod- Furyan mechanical Squonker
Atomizer- 24mm Deathtrap RDA
Build - 0.12ohm chunky bastard
Battery- Ijoy 5 legged 20700, Samsung 30Q
Eliquid- N/A

Issues-
1. Torn wrap 20700 (Nadalama)
2. Coil touching the deck (Choderfett)
3. Squonk Pin not installed (Choderfett)
4. 30q does not have the CDR to support the coil resistance safely (Doomsday Vaper)
5. No wick or liquid (Choderfett)
6.
7.
8.


Subjective- maintanence
1. 30Q has seen better days (huckleberried) needs heating back down and it’ll be fine (~Don~)
2. Dirty contact = crap performance (vape fan)

You mean the 18650 is torn and not the 20700 right?
to use the 18650 your missing the battery adaptor (not shown)

 

[KingPin!]

You mean the 18650 is torn and not the 20700 right?
to use the 18650 your missing the battery adaptor (not shown)

The 20700 has a tear in it ...to 30Q does not

And correct ....user decides to use the 30Q cause they have a tear, but there’s no adaptor ...so risk could be to go with the 20700 and chance it

 

[~Don~]

Are we looking for the firing issue these have?

 

[KingPin!]

Are we looking for the firing issue these have?

can do ...would like to know more anyway cause I’ll probably need to fix it haha

That’s not specifically on the list though

 

[choderfett]

personally I would dry burn the coil (clean) or just change it out.. it looks a little crusty