Become a Patron!

Does everybody but me love the Profile RDA?

gsmit1

Platinum Contributor
Member For 4 Years
I have one on both cuts and a Topside. Much better on the cut than Topside. I love the Topside but probably need another rda for that one. Profile needs more juice than the Topside can provide for me. But now vaporoxx has 3 on the Topside. So I don't know
It's just the right height, fits perfect, looks good and electronically it lends itself to heating elements that run perfectly for a single high drain battery. Especially a 2_700.

Even aside from the generous squonking of the Cut too :)
 

Jinx'd

Platinum Contributor
Member For 2 Years
I am looking around at pics = idk what color I want, black or purple. matchy is fine & dandy. but there is something to be said for contrast.
and the black would go well with the buttons and panel.

Mr Indecisive = :gaah:
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
I am looking around at pics = idk what color I want, black or purple. matchy is fine & dandy. but there is something to be said for contrast.
and the black would go well with the buttons and panel.

Mr Indecisive = :gaah:
What color is your mod
 

gsmit1

Platinum Contributor
Member For 4 Years
I am looking around at pics = idk what color I want, black or purple. matchy is fine & dandy. but there is something to be said for contrast.
and the black would go well with the buttons and panel.

Mr Indecisive = :gaah:
20190212_182939_cr.jpg
 

Jinx'd

Platinum Contributor
Member For 2 Years
I should have bought 2 more of these.

but I learned from this. next time a deal like this comes along= buy more than one. but honestly, I wasn't sure I would like it nearly as much as I do.
 

Jinx'd

Platinum Contributor
Member For 2 Years
oh. where are you guys getting these ? I don't want to wait, USA only. so far element is $30, but they have nearly all colors.
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
I am looking around at pics = idk what color I want, black or purple. matchy is fine & dandy. but there is something to be said for contrast.
and the black would go well with the buttons and panel.

Mr Indecisive = :gaah:
The purple is almost a perfect match for the cut but if you don't have a lot of RDAs I'd go with black.
That way if you decide to out it on another mod you can.

ff4f01d6d4c4cc8848d265552884a7cb.jpg


Sent from a Galaxy far far away!
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
oh. where are you guys getting these ? I don't want to wait, USA only. so far element is $30, but they have nearly all colors.
I think I bought one here. Then element vape. And just won another from o e of the Vu challenges
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
oh. where are you guys getting these ? I don't want to wait, USA only. so far element is $30, but they have nearly all colors.
3avape and efun.top both had them for 12.00 but it comes on the slow boat from China.
30. is still a good buy.

Sent from a Galaxy far far away!
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
you guys are far more experienced at finding the deals than I am. cause I have not seen anyone dumping the Cut = $50'ish.
other than when we got ours.
I broke my first one 5 minutes after I got it. Stupid me loaded the Rage firmware on it thinking there was an update. My dumbass read the manual. I didn't think that 3f would have anymore so I bought one for 80 from element. Then boom. 3f pops out with more 12 purple ones.So I bought another purple. I gave my broken one away and he was able to fix it
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
You're moving too fast kitty cat.


That.....was....a....ques... tion .....? ? ? ?
Ha ha so much going on. I appreciate it man. I'll probably have my wife pic some up when she goes to the store later. Sally's beauty supply right next to walmart
 

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
Ha ha so much going on. I appreciate it man. I'll probably have my wife pic some up when she goes to the store later. Sally's beauty supply right next to walmart
O......K........cool.........just.........checking..........
;)
 

Jinx'd

Platinum Contributor
Member For 2 Years
I broke my first one 5 minutes after I got it. Stupid me loaded the Rage firmware on it thinking there was an update. My dumbass read the manual. I didn't think that 3f would have anymore so I bought one for 80 from element. Then boom. 3f pops out with more 12 purple ones.So I bought another purple. I gave my broken one away and he was able to fix it


yes, I know = bummer.
 

Jinx'd

Platinum Contributor
Member For 2 Years
Aww it's just money.


But seriously I worked 7 days a week last spring til fall for my vape habit. Gotta do what ya gotta do. Lol

its funny when people say that. to me, that money, I had to give up part of my life to get it. when that money is wasted, I wasted part of my life = not a happy camper.

with the money some of you guys spend, I think 8 days a week isn't enough. but then I don't make much, so what do I know.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
its funny when people say that. to me, that money, I had to give up part of my life to get it. when that money is wasted, I wasted part of my life = not a happy camper.

with the money some of you guys spend, I think 8 days a week isn't enough. but then I don't make much, so what do I know.
No man I hope I didn't offend you. I was really just playing around. I have 5 kids and need all the cash I can get. Most of the stuff I get is from here in the sale thread. Some just trades when I'm lucky. But what I normally do is when I sell stuff I keep it in my PP account for something new. If I can forsee that I'm going to need it I'll transfer it to my bank. Trust me the weeks I don't have stuff for sale I can definitely tell. But really man I was just fucking around. I hope Noone thinks I'm a snob by my money comment.
 

Jinx'd

Platinum Contributor
Member For 2 Years
No man I hope I didn't offend you.

NO dude, not at all, its all good.

I was just say'n, some here spend far more than me. and that is very cool = you guys can try out shit, tell us about it. then we can jump on the "informed' band wagon. I was "trying" to make a joke.

many thanx to you guys :hug:
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
NO dude, not at all, its all good.

I was just say'n, some here spend far more than me. and that is very cool = you guys can try out shit, tell us about it. then we can jump on the "informed' band wagon. I was "trying" to make a joke.

many thanx to you guys :hug:
Ok cool man. Just did t want you to think bad of me any more than buying up all the stuff while people are at work:giggle::devil::vapemail:
 

gsmit1

Platinum Contributor
Member For 4 Years
Ehh it happens. At least we're all happy with it. The 5 minutes I used the first one though I knew it was a keeper
It is a keeper indeed. I like it alot. One of the great things about the Cut, is that I have just about no leaking from the simple sqounk system whatsoever. It is bone dry when I pull the bottle to fill it up. I get very good battery life out of a Molicell 20700 and it hits nice n solid. I wasn't sure about the form factor at first, but it grew on me and I like that now too.
....some here spend far more than me. ...
Believe me man, I'm so broke I can't pay attention, If it weren't for a distinct uptick in contract work the last few months and some very smart shopping, if I don't say so myself, I wouldn't have any of this stuff.
 

DonBaldy

Platinum Contributor
Member For 4 Years
Sounds like you might be:

1. Getting hotspots due to a warped mesh

2. Have high spots on your mesh

3. Have too little cotton causing hotspots

4. Have unknown gremlins like OP causing months of horrible soul-destroying frustration leading to a life of drinking and bleak stares into the abyss of infinity while questioning the meaning of life

5. Some combination of the above


Sent from my iPhone using Tapatalk

Gotta be number 4..maybe number 5
 

Jinx'd

Platinum Contributor
Member For 2 Years
yeah, the Cut is great. I feels comfy in the hand and is solid feeling. with no clammy hand. I am getting to not like my LUXE, no matter how clean it is, and it usually isn't, my hand is clammy.
 

gsmit1

Platinum Contributor
Member For 4 Years
yeah, the Cut is great. I feels comfy in the hand and is solid feeling. with no clammy hand. I am getting to not like my LUXE, no matter how clean it is, and it usually isn't, my hand is clammy.
I'm not sure what you mean by "clammy."
 

DonBaldy

Platinum Contributor
Member For 4 Years
Think I have a winner. Used the last mesh coil that was included and played with it more until I was sure there were no hot spots and glowed evenly (which I admittedly didn't do before). Put fresh wick of CB prime and Used much less that the amount that's in the included cotton and now I have a nice vape at 45W. Going to order some of the other mesh ppl have been talking about and maybe use a touch more cotton next time.
 

Izanagi7

Bronze Contributor
Member For 1 Year
I’m almost wishing I hadn’t discovered Nichrome mesh. NexMesh and ss mesh tastes like trying to vape through a pillow by comparison.

There’s like a hint of flavour, but you really gotta look for it.


Sent from my iPhone using Tapatalk
 

Jinx'd

Platinum Contributor
Member For 2 Years
my computer crashed, again, so I decided to build this while rebooting.

ok, I have it up and running, using it now.

building and wicking = very easy. what you see is 1 whole piece of rayon.

issues.
1. the ears that cover the air holes. when turning the cap to adjust, it F's up the wicking. and I think it may F up the wick just putting it straight down.
2, hot spots, I had to keep tweeking the wick to get rid of them.

the flavor, average. but I am using a juice that is low in the bottle and is about 2 months old. if that makes any difference. idk.

so far, the verdict still out. =maybe I am doing something wrong.
 
Last edited:

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
Everyone has there own take on this.....
1 Read this about Rayon
https://www.e-cigarette-forum.com/t...low-flavor-longevity-and-nic-hit-pt-2.706948/
2 Thin tails by at least 1/2 or more. I'm thinning to about 60-65% and trimming short to where they just touch the deck.
3 Need more wick in between mesh and springy clampy thingy, shove 1/3 piece of cotton bacon on clamp and trim to length.
4 I posted some pics, I thin tails more now than then....
Does everybody but me love the Profile RDA?

Cotton is a different animal than rayon.
This is just my way to do it, nobody else's way is wrong. It's not that fussy, hard, or time consuming.
 

Jinx'd

Platinum Contributor
Member For 2 Years
Everyone has there own take on this.....
1 Read this about Rayon
https://www.e-cigarette-forum.com/t...low-flavor-longevity-and-nic-hit-pt-2.706948/
2 Thin tails by at least 1/2 or more. I'm thinning to about 60-65% and trimming short to where they just touch the deck.
3 Need more wick in between mesh and springy clampy thingy, shove 1/3 piece of cotton bacon on clamp and trim to length.
4 I posted some pics, I thin tails more now than then....
Does everybody but me love the Profile RDA?

Cotton is a different animal than rayon.
This is just my way to do it, nobody else's way is wrong. It's not that fussy, hard, or time consuming.

I could taste cotton. cannot taste rayon.
 

88ArDeN88

Gold Contributor
Member For 4 Years
Does anyone use their profile in TC mode? MY Therion BF dna 75c is coming in tomorrow and I've got a recurve I'm going to put on it since it really is a squonk rda, but I'm wondering how the profile fairs in tc mode?
 

gsmit1

Platinum Contributor
Member For 4 Years
Does anyone use their profile in TC mode? MY Therion BF dna 75c is coming in tomorrow and I've got a recurve I'm going to put on it since it really is a squonk rda, but I'm wondering how the profile fairs in tc mode?
I have not, but the thought has crossed my mind.
 

VU Sponsors

Top