Become a Patron!

What did you do today that is vape related?

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Cripes, I have a Lemo 2, will be going through vapocolypse stash in the coming days, I'll let you guys know if I run across it

Besides vape, didn't do much - oh, had to adjust wicking on Kayfun 5, it started to feel like it was dry hitting
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Bought a Pico S at lunch and some juice I haven't had in a long time. Dead Shriners hand of the black stone. Blackberry yogurt. Man it was great. Hope it hasn't changed
 

wildgypsy70

“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Bought a Pico S at lunch and some juice I haven't had in a long time. Dead Shriners hand of the black stone. Blackberry yogurt. Man it was great. Hope it hasn't changed
Blackberry yogurt? Sounds good! I hope it meets your expectations!
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
5 liters would probably last me the rest of my life.... with some left over more than likely. Lol

Sent from my SM-G960U using Tapatalk

That's exactly what I'm hoping. I'm nearly 59, so maybe 30 yrs-ish... Plus, though right now my son vapes mostly "store bought", if the prices on that go thru the roof, he'll be a lot more dependent on DIY ejuice than he is currently.

Andria
 

Smigo

Gold Contributor
Member For 2 Years
FW's Butter Pecan, Maple Pecan, Sweetener, Blood Orange, Vanilla Ice Cream, Yellow Cake, Hawaiian Limeade, Lemonade Natural, Butterscotch Natural, imo, are all varying degrees of very good to great. I'm sure there are a few more I don't have right in my mind right now.

Marshmallow, save your money. And personally, I don't like their blackberry, but I think the one I have is blackberry natural.

And as funny as it sounds, I get a lot of mileage out of their Reindeer Poop. It's a good flavor booster for bakeries, nut flavors, and chocolates, used in TINY amounts, in place of plain acetyl pyrazine. Too much of it makes my lips numb, so I know the AP is in there.

Will have to try their black licorice. That is one flavor I dearly love in vape liquid. I have Inawera Anise that I use sometimes in alcoholic beverage flavors, but it seems to fade pretty bad after a week or so.
Missed that about FW licorice. Its great and I have used it for easy 2 1/2 yrs.
FW Licorice 5% FA Marshmallow 5% sweeten to taste. No fade. Like a beutiful chewy licorice candy.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I finally got the ol man to put the wraps on my white mods, and they turned out really great!

This one just tickles me:
giraffes.jpg

This one is an excellent excuse to buy another AHD driptip: :teehee:
2ndGrayWrap.jpg

Andria
 
Today I learned that a pipe that I had recently acquired that called for an 18650 button top battery, of which I ordered three different sets of and none fit (too wide of a diameter for the mod), will work with a flat top 18650 with a magnetic fuse attached. Probably the happiest moment of my week so far, looking back.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Where did you order the Knight 80 from? This thing caught my eye.
Got it from 3avape. It was a pre-order but says ship from 3-5 days after purchase. Not sure about that one but you know. I can't wait to get it. Can use an rba and also the pasito rba. I have that one so hoping I have the right adapter for it. If not I'll order it when it hits the states and just use the stock coils until then. It can use either the knight 80 coils or Pasito coils as well.
 

VinnySem

Silver Contributor
Silver Contributor
Member For 4 Years
Got it from 3avape. It was a pre-order but says ship from 3-5 days after purchase. Not sure about that one but you know. I can't wait to get it. Can use an rba and also the pasito rba. I have that one so hoping I have the right adapter for it. If not I'll order it when it hits the states and just use the stock coils until then. It can use either the knight 80 coils or Pasito coils as well.
Yeah I have a Pasito and the RBA for that as well. 80 watts, TC, and the Smoant Ant chip... I just ordered a kit as well.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Yeah I have a Pasito and the RBA for that as well. 80 watts, TC, and the Smoant Ant chip... I just ordered a kit as well.
Yea I'm hoping it's completely compatible with the rba we have but I'm betting well still need the knight to pasito adapter. Lol. I think it's only like 8 bucks
 

brandon david

Bronze Contributor
ECF Refugee
Member For 5 Years
Any of you guys in the US ever ordered from Canada and have an idea of how long packages generally take to get through customs?
 

~Don~

Platinum Contributor
Member For 5 Years
Installed the quad core aliens I made yesterday in the C2MNT then slapped it on my Overlord

c52b7f7f5159ac11358de336f1047061.jpg



Not where I like my ohms (.13 to high) but it’s a really good vape so I’ll live


Sent from my iPhone using Tapatalk
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Any of you guys in the US ever ordered from Canada and have an idea of how long packages generally take to get through customs?

No vape stuff, but I have placed eBay orders for a few things from Canada, found them very slow to get across the border, like nearly as slow as ordering from China (on one of China's good days). I'd expect 2 to 3 weeks under normal circumstances, don't know how the COVID situation may have impacted the border.
 

~Don~

Platinum Contributor
Member For 5 Years
Any of you guys in the US ever ordered from Canada and have an idea of how long packages generally take to get through customs?

Have to echo Nadalama... Takes longer especially if customs wasn't filled out correctly, or duty fees weren't paid... they'll hold that shit til they get paid.

Sort of why if I order anything overseas minus China; no DHL... hard pass. Get my Dvarws from Budapest in 3 days, order from Toronto takes 3 weeks.

Imagine those that order from Toronto and live in like Buffalo or Rochester, only a few hours away... still takes them at minimum 7-10 days
 

Just Frank

Platinum Contributor
Member For 5 Years
I looked at some older atomizers but probably won't order any even if they are pretty cheap. Is the Twisted Messes V2 Squared any good? If it came with a bf pin, it would be more tempting. Also I never got a Vapers Clouds VCMT RTA. I have plenty that look similar so probably not missing anything there..
 
Last edited:

brandon david

Bronze Contributor
ECF Refugee
Member For 5 Years
I looked at some older atomizers but probably won't order any even if they are pretty cheap. Is the Twisted Messes V2 Squared any good? If it can with a bf pin, it would be more tempting. Also I never got a Vapers Clouds VCMT RTA. I have plenty that look similar so probably not missing anything there..
I did the same last night and wound up picking up a couple of wasp nanos to throw in storage since they are so cheap.

Sent from my SM-G960U using Tapatalk
 

ProlineVaper

VU Donator
Silver Contributor
Member For 3 Years
ECF Refugee
VU Patreon
Paid it forward...Helped a fellow vaper down on their luck by sending out a few key mixing supplies to keep them from getting their nicotine through the dreaded stink stick!

Feels good to be able to help somebody out once in a while!

Sent from my LGL722DL using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Paid it forward...Helped a fellow vaper down on their luck by sending out a few key mixing supplies to keep them from getting their nicotine through the dreaded stink stick!

Feels good to be able to help somebody out once in a while!

Sent from my LGL722DL using Tapatalk
That's awesome. It's great to be able to help someone when you can.
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
Paid it forward...Helped a fellow vaper down on their luck by sending out a few key mixing supplies to keep them from getting their nicotine through the dreaded stink stick!

Feels good to be able to help somebody out once in a while!

Sent from my LGL722DL using Tapatalk

Yay you!! :hug::hug::hug::


Edwin, I meant to ask you if you ever ordered from Blazed Vapes, because I bought a SW Mini from them but I never got a receipt. That made me suspicious. Thanks, bro.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Got my 24 30ml bottles yesterday, and the new liter of nicotine today. But the 60ml bottles won't be here till Monday-ish, so the nicotine is resting in the fridge. Got the 24 30ml's in the dishwasher, and their caps soaking in hot soapy water, so they'll be clean and ready when I get ready to decant the nicotine.

Spent some time at Quora today, and along with all the idiocy regarding tRump and COVID19, I managed to squash a few lies and ignorant statements about vaping and "nicotine addiction" (it doesn't exist!). Can't say my work there is done, though; just today I saw another iteration of the formaldehyde myth. :facepalm: These idiots do love to trot out long-ago-squashed junk science, don't they?!? Naturally I deleted that comment, as I always do when people comment my TRUE answers with lies and ignorance.

Last night, I didn't order one new AHD driptip... I ordered TWO! :teehee: But it remains to be seen if one of them is feasible; one of them, I ordered in the "silver leaf" material, and she states that sometimes there are air bubbles in that material that make it impossible to turn into a driptip... so, we'll have to see.

I think I need a new 12-step group, for AHD addiction. :teehee: Actually, I just need to be able to go buy some spring clothes at Ross, but that won't be happening for a while. *sigh* Go away, COVID19!

Andria
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Ok y'all, I just built my first mesh RDA. The TVL Reload that came with the Revenant TVL Delta kit? I had ordered some VV SS316L 300 mesh and I guess was just waiting to get my nerve up. Put the coil in and wicked it with a whole bunch of CB2. Trimmed it at an angle underneath and tucked the tops of the tails in. Ohms are at 0.19.

Don't have it on the Delta squonker; it's on one of my Lunas.

It seems to vape fine so far, haven't had any dry hits or anything, so what should I watch for? Is it necessary to hit the squonk bottle more often to make sure the cotton stays extra wet? I've heard about the dry-hits-from-hell, so want to avoid those.

ETA: I did change it back to the Delta. Higher wattage is nicer.
 
Last edited:

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I bought a bunch of flavors from ECX/JF that I’m running out of, since I need to mix really soon. I’ve blown through so many flavors now, it’s amazing.

Hope everyone’s having a great weekend. Be healthy and safe, y’all.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I bought a bunch of flavors from ECX/JF that I’m running out of, since I need to mix really soon. I’ve blown through so many flavors now, it’s amazing.

Hope everyone’s having a great weekend. Be healthy and safe, y’all.

Are DIY companies shipping to New York still?
 

ProlineVaper

VU Donator
Silver Contributor
Member For 3 Years
ECF Refugee
VU Patreon
Yay you!! :hug::hug::hug::


Edwin, I meant to ask you if you ever ordered from Blazed Vapes, because I bought a SW Mini from them but I never got a receipt. That made me suspicious. Thanks, bro.
I have ordered from them multiple times and never had any problems with them. If you absolutely need a receipt, contact them or log in to your account and under your order history you should be able.to print the invoice.

Sent from my LGL722DL using Tapatalk
 

ProlineVaper

VU Donator
Silver Contributor
Member For 3 Years
ECF Refugee
VU Patreon
Ok y'all, I just built my first mesh RDA. The TVL Reload that came with the Revenant TVL Delta kit? I had ordered some VV SS316L 300 mesh and I guess was just waiting to get my nerve up. Put the coil in and wicked it with a whole bunch of CB2. Trimmed it at an angle underneath and tucked the tops of the tails in. Ohms are at 0.19.

Don't have it on the Delta squonker; it's on one of my Lunas.

It seems to vape fine so far, haven't had any dry hits or anything, so what should I watch for? Is it necessary to hit the squonk bottle more often to make sure the cotton stays extra wet? I've heard about the dry-hits-from-hell, so want to avoid those.

ETA: I did change it back to the Delta. Higher wattage is nicer.
I have always used a single coil build on my TVL BF RDA. The mesh just has too much cotton to tuck down into the juice well. The manual also shows a single coil build, even though it looks like mesh clamps.
12d01e0f895695f3f82aa16d31325667.jpg


Sent from my LGL722DL using Tapatalk
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I have ordered from them multiple times and never had any problems with them. If you absolutely need a receipt, contact them or log in to your account and under your order history you should be able.to print the invoice.

Sent from my LGL722DL using Tapatalk

Thanks. I’m used to getting order confirmations, but I didn’t get one from LB today, so it might be corona related. But since it’s computerized, I figured it wouldn’t be affected.

It was a $50 order, so I’m not that upset. But I’ve been wanting the Snow Wolf Mini for a while. I hope I love it!
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I have always used a single coil build on my TVL BF RDA. The mesh just has too much cotton to tuck down into the juice well. The manual also shows a single coil build, even though it looks like mesh clamps.
12d01e0f895695f3f82aa16d31325667.jpg


Sent from my LGL722DL using Tapatalk

Until last night I had run a single coil in mine as well, just have wanted to try the mesh for a while. I did have to adjust it once today because as the cotton settled it pulled away from the mesh a little. I loosened one side of it, trimmed a slice of it off, and then fastened it back. Problem solved. It's vaping quite well with the mesh, actually.

I fanned the cotton out and trimmed it at an angle on the underside of the wicks, so the top part of each side of the wick is the part that gets tucked down into the wells. Seems to be working fine.
 

Ruppy_bear

Bronze Contributor
Member For 4 Years
Unlisted Vendor
DD36FB6F-5958-467C-803F-737DD77485EB.jpeg CB2922AD-3274-4AD7-AEB4-D06A3C657924.jpeg Looks like I join the Russian hardcore league lol

Ok this isn’t mine, just pick it up for a friend from my friend. Not bad, very light and love the price. Feel like picking up one myself (tanks mine)
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Talked with jinx'd about making stabwood panels for billet boxes. Seems feasible and a lot cheaper than buying from a modder. Sounds rewarding with a little bit of work
 

VU Sponsors

Top