Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
Diescum88

Diescum88

Gold Contributor
Member For 4 Years
dred said:
Yes. Ti is your friend.

And I guess this is my happy morning ... I survived my Iron Butt Ride and was this years fast finisher for the club. 1068.1 miles in just under 17 hours. Great surprise ... I was greeted by a parking lot full of friends at the finish.

And the Evic survived the day on the charge I left with yesterday morning. I took a charging cable but never had to use it.
Click to expand...
Hell yeah congrats on the ride man :)
 
T

Taver13

Guest
i got woken up by a three year old elbow being pushed directly into that little soft spot on my throat. kid is lucky i didnt knock him out from shear reaction and survival mode kicking in.
 
T

Taver13

Guest
dred said:
Yes. Ti is your friend.

And I guess this is my happy morning ... I survived my Iron Butt Ride and was this years fast finisher for the club. 1068.1 miles in just under 17 hours. Great surprise ... I was greeted by a parking lot full of friends at the finish.

And the Evic survived the day on the charge I left with yesterday morning. I took a charging cable but never had to use it.
Click to expand...
good shit my man, glad you arived safe and sounds. sure you got some saddle sores though. if im sold on this temp control when i get my dna40 up and running and my ipv, one of them evics is on my wishlist. the titanium intrigues the hell outa me. wonder if the ipv can handle it.
 
D

Donald Bickers

Guest
Taver13 said:
im wondering if its that specific chip in the smy that allows your nichrome to work.
Click to expand...
I wondered that myself,,,,thats why I stated earlier that nichrome is working in this one but cant guarantee that it will work in all of the tc devices
 
T

Taver13

Guest
im gonna give the cloupor transplant another go, i just love the formfactor of it especially with th silicone case
 
D

Donald Bickers

Guest
Fathers Day morning vape
dh38C3q.jpg
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
@anendeloflorien whenever you get around to it, can you put up the pictures of the drilled out subtank rba section? and you did that on the OG not the mini correct?
Click to expand...

a27188e851b80f75f0f30914773e83c2.jpg
dc20724c0164bb7259d444d1a4178319.jpg

Good timing I was just about to recoil this thing. It's the ST mini rba. I drilled 3/16" holes on either side above where the juice channels are. I've got another rba on the way so I can do it again - I'm going to make the holes a bit lower so I can vape it a bit longer. I'll post some pics once I recoil this bad boy
 
T

Taver13

Guest
anendeloflorien said:
a27188e851b80f75f0f30914773e83c2.jpg
dc20724c0164bb7259d444d1a4178319.jpg

Good timing I was just about to recoil this thing. It's the ST mini rba. I drilled 3/16" holes on either side above where the juice channels are. I've got another rba on the way so I can do it again - I'm going to make the holes a bit lower so I can vape it a bit longer. I'll post some pics once I recoil this bad boy
Click to expand...
awesome im going to give thos a try on my ST mini. i think that coupled with TC is goin to be epic
 
T

Taver13

Guest
anendeloflorien said:
a27188e851b80f75f0f30914773e83c2.jpg
dc20724c0164bb7259d444d1a4178319.jpg

Good timing I was just about to recoil this thing. It's the ST mini rba. I drilled 3/16" holes on either side above where the juice channels are. I've got another rba on the way so I can do it again - I'm going to make the holes a bit lower so I can vape it a bit longer. I'll post some pics once I recoil this bad boy
Click to expand...
chimney coil? i may drill 4 holes for wicking since i prefer chimneys in single coil tanks
 
T

Taver13

Guest
@Donald Bickers you would love the build deck on the subtank mini i believe, its almost like an improved version of a kayfun deck. when i rebuild it later ill snapa pic for you, lets see if i can explain this. you still put the wire under screws, but the screws are in kind of a cutout so it grips better and the cutouts are raised above the airhole
iu
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
chimney coil? i may drill 4 holes for wicking since i prefer chimneys in single coil tanks
Click to expand...

Yeah this would be perfect for a good chimney coil I haven't found a good way to wick it yet though. If I make the coil ID a similar size to the airflow it's really tight in there. I'm sticking to horizontal coils for the time being
 
T

Taver13

Guest
anendeloflorien said:
Yeah this would be perfect for a good chimney coil I haven't found a good way to wick it yet though. If I make the coil ID a similar size to the airflow it's really tight in there. I'm sticking to horizontal coils for the time being
Click to expand...
when i do a chimney, i usually make the id of the coil a little bigger than the hole and it does not seem to ipede the airflow too much
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
when i do a chimney, i usually make the id of the coil a little bigger than the hole and it does not seem to ipede the airflow too much
Click to expand...
Yeah the problem I've found is there's not enough space left on either side to get much wicking through. Last chimney coil I did was a leaky bitch too. If you are able to get one to work post pics!
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
i will!, if i dont get a soldering iron from my friend to borrow for the day, my mission for the day is effective subtank mini chimney coil
Click to expand...
Haha hell yah dude I'm sure it's possible I just don't have much experience with building them in that tight of a space.

Well gotta make up pet food now I'll be back in a bit
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
dred said:
Yes. Ti is your friend.

And I guess this is my happy morning ... I survived my Iron Butt Ride and was this years fast finisher for the club. 1068.1 miles in just under 17 hours. Great surprise ... I was greeted by a parking lot full of friends at the finish.

And the Evic survived the day on the charge I left with yesterday morning. I took a charging cable but never had to use it.
Click to expand...

I bet you had fun on your club bike ride :cool: I have not rode a bike in years....I use to have a dirt bike to ride in the mountains but I cloths lined myself on a tree across the chest and have not rode since, "it hurt so bad :(

What wire and from where do you recommend again? I know you posted a while back but I did not bookmark :(
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
isnt having a small house zoo fun? i just fed my tortoise, snakes are good for another few weeks
Click to expand...
That it is. We feed the dog and cat a raw diet which is super cheap and really good for them but it's a good hour and a half process every couple weeks to make up a batch
 
T

Taver13

Guest
anendeloflorien said:
That it is. We feed the dog and cat a raw diet which is super cheap and really good for them but it's a good hour and a half process every couple weeks to make up a batch
Click to expand...
same here, all my dogs are on raw diet, most of it we get for free from butchers, and a spanish supermarket here sells chicken leg quarters for 39 cents a pound, so that is a big part of their diet
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
same here, all my dogs are on raw diet, most of it we get for free from butchers, and a spanish supermarket here sells chicken leg quarters for 39 cents a pound, so that is a big part of their diet
Click to expand...
Nice! How'd you score the free hookup? Our dog is allergic to poultry so we use ground pork, lamb, beef, beef liver, fish, carrots, Brussels sprouts and green beans. Just finished cutting up the beef liver..... Seriously, besides tripe I think it is the most offensive food product to all the major senses. Smell, touch, sound, taste, sight. It's got all of em and I can't ever seem to get that smell off my hands
 
T

Taver13

Guest
anendeloflorien said:
Nice! How'd you score the free hookup? Our dog is allergic to poultry so we use ground pork, lamb, beef, beef liver, fish, carrots, Brussels sprouts and green beans. Just finished cutting up the beef liver..... Seriously, besides tripe I think it is the most offensive food product to all the major senses. Smell, touch, sound, taste, sight. It's got all of em and I can't ever seem to get that smell off my hands
Click to expand...
i just asked if i can come pick up their scraps that they just throw away, and they said sure, so on friday i make some rounds and end up with like 30 lbs of free food. i dont grind any up though, and no veggies, dogs cant digest anything that is plant as you know so i see no point. i let them chew the bones naturally, its almost like flossing for them and keeps their teeth clean. not being able to give him poultry kinda sucks, since the leg quarters have organ meet attached to them, so dont really have to cut anything up. i dont do tripe either mostly for my own benefit, that shit is nasty, especially the green crap
 
T

Taver13

Guest
anendeloflorien said:
Nice! How'd you score the free hookup? Our dog is allergic to poultry so we use ground pork, lamb, beef, beef liver, fish, carrots, Brussels sprouts and green beans. Just finished cutting up the beef liver..... Seriously, besides tripe I think it is the most offensive food product to all the major senses. Smell, touch, sound, taste, sight. It's got all of em and I can't ever seem to get that smell off my hands
Click to expand...
i also give them a bowl of sardines each every friday, keeps their coats nice a shiny
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Taver13 said:
i just asked if i can come pick up their scraps that they just throw away, and they said sure, so on friday i make some rounds and end up with like 30 lbs of free food. i dont grind any up though, and no veggies, dogs cant digest anything that is plant as you know so i see no point. i let them chew the bones naturally, its almost like flossing for them and keeps their teeth clean. not being able to give him poultry kinda sucks, since the leg quarters have organ meet attached to them, so dont really have to cut anything up. i dont do tripe either mostly for my own benefit, that shit is nasty, especially the green crap
Click to expand...
Yeah the meat market I used to work at did boiled tripe. I couldn't even be in the kitchen when they were cooking it. Made me want to vomit.

I'm not an expert but my wife has spent 6 years in the pet industry and is certified in pet nutrition and she's the one who decides what goes in there lol. She knows more about animal nutrition than most vets so I just go with what she says :)
 
otto85

otto85

Gold Contributor
Member For 4 Years
Taver13 said:
i will!, if i dont get a soldering iron from my friend to borrow for the day, my mission for the day is effective subtank mini chimney coil
Click to expand...
Heres a idea on wicking that build might be a epic fail lol but what if u cut the wick half the width folded it in half stuff it from the top pull both ends through the bottom and to the channels

Sent from my LGL41C using Tapatalk
 
You must log in or register to reply here.

VU Sponsors

Top