Become a Patron!
APIWATW Challenge- Closes 01/31/2019 (15 Prizes Available)
- Thread starter jwill
- Start date
- Status
jwill
The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Build Info-
DIY Box Mod (Series)
CompLyfe BD-2 Deck w/Trinity Glass Bullet Cap
Coils 4x26NI80 wrapped in 40G SS316, 3.5mm ID .18ohms
Wicked with boiled cotton
Batteries- Samsung 20S Batteries
Juice- 9mg Ohm Vapes "Yellow Dream"
Issues-
1. Coils listed are not actually what is being used (These are 22g NI80) (So619Cal)
2. Mismatched Batteries (LGHG6 20650 + Samsung 20S). Good Catch (Nadalama)
3. This is a Parallel Mod (5150Sick)
4. Positive wire desoldered (Vape Fan) and giving assist to (5150 Sick)
Subjective
1. 9mg nic too high for super low ohm vaping. (Nadalama)
This box mod melted down on me. Got so hot it melted the solder off that switch. I put the batteries in series, hit it. Set it down and walked away. Came back to a melt down. I keep it in rotation with the others, so when I grab it, I get reminded. @Vape Fan , you owe us your very own edition, sir. Look forward to seeing what you put together. @nadalama you owe us one as well. Y'all can ping @f1r3b1rd and myself and we will run through it.
DIY Box Mod (Series)
CompLyfe BD-2 Deck w/Trinity Glass Bullet Cap
Coils 4x26NI80 wrapped in 40G SS316, 3.5mm ID .18ohms
Wicked with boiled cotton
Batteries- Samsung 20S Batteries
Juice- 9mg Ohm Vapes "Yellow Dream"
Issues-
1. Coils listed are not actually what is being used (These are 22g NI80) (So619Cal)
2. Mismatched Batteries (LGHG6 20650 + Samsung 20S). Good Catch (Nadalama)
3. This is a Parallel Mod (5150Sick)
4. Positive wire desoldered (Vape Fan) and giving assist to (5150 Sick)
Subjective
1. 9mg nic too high for super low ohm vaping. (Nadalama)
This box mod melted down on me. Got so hot it melted the solder off that switch. I put the batteries in series, hit it. Set it down and walked away. Came back to a melt down. I keep it in rotation with the others, so when I grab it, I get reminded. @Vape Fan , you owe us your very own edition, sir. Look forward to seeing what you put together. @nadalama you owe us one as well. Y'all can ping @f1r3b1rd and myself and we will run through it.
jwill
The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
APIWATW #10
Build Info-
Boxer Squonk TC Mode
Goon 1.5 RDA
24x2Ti wrapped in 40g NI80 Coils 3mm ID, dual coil .22 ohms
Cotton Bacon Prime
Sony VTC4 Batteries
and using some of what @f1r3b1rd calls "only the greatest juice on the planet"
Issues:
1.
2.
3.
4.
5.
6.
Subjective:
nothing, and everything.
Build Info-
Boxer Squonk TC Mode
Goon 1.5 RDA
24x2Ti wrapped in 40g NI80 Coils 3mm ID, dual coil .22 ohms
Cotton Bacon Prime
Sony VTC4 Batteries
and using some of what @f1r3b1rd calls "only the greatest juice on the planet"
Issues:
1.
2.
3.
4.
5.
6.
Subjective:
nothing, and everything.
#10 *samsung batteries.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Don’t judge me
APIWATW #10 The battery wrap of the one standing up damaged/wore
Sent from my SM-S727VL using Tapatalk
Sent from my SM-S727VL using Tapatalk
Last edited:
APIWATW #10
Issues:
1. Not a goon
2. .08 ohm per coil
3. Battery wrap destroyed
4. Coils touching
5. VCT are 18650 and the boxer takes 20700 and 21700. Don't see an adapter for 18650. Plus the Mod is for single battery.
6. Coil heights are massively different. Meaning one coil will have a much different resistance than the other.
Maybe subjective ... but that cotton looks thin as hell to me.
Issues:
1. Not a goon
2. .08 ohm per coil
3. Battery wrap destroyed
4. Coils touching
5. VCT are 18650 and the boxer takes 20700 and 21700. Don't see an adapter for 18650. Plus the Mod is for single battery.
6. Coil heights are massively different. Meaning one coil will have a much different resistance than the other.
Maybe subjective ... but that cotton looks thin as hell to me.
Last edited:
In that second pic, between the o rings, what is that clearish thing wedged up in there?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
It’s a one way valve for a fill port
Also, that is a single battery 18650 or 2x700 Boxer (DNA75C?) and there is no reason for there to be 2 batteries (DNA250C).
jwill
The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
It is a single cell 18650
Hmm... really gonna sound stupid here, but what RDA is that? I can see a skull on the cap but no clue what it is.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
That’s actually the faris rdta in rda mode
#10
I might know any better but any reason why the double coils are not both centered?
I might know any better but any reason why the double coils are not both centered?
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I build it offset because I shut down the airflow to two holes. The barrel locks in place, so I build it to keep the airflow centered to the coil
Does the trigger look like it’s already touching the 510?
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
It looks to me like there is the sharp end of a screw sticking out beside the squonk bottle, which would scratch or otherwise interfere with the battery when it's installed.
Just my eyes?
I swear, all the pics I can find, that looks like the 2x700 version of the mech Boxer.
Just my eyes?
I swear, all the pics I can find, that looks like the 2x700 version of the mech Boxer.
Last edited:
jwill
The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Just a heads up we have a super special edition coming pretty soon. A friend of mine is sending some specs for a build and I am going to replicate it. Be warned, it will be garbage knowing this person.
jwill
The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
jwill
The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Y'all are overcomplicating this last one. Its in the pic and staring you all in the face. Its smiling at you like it hijacked your webcam and is demanding ransom for what it has seen.
Where's Batman and Sherlock Holmes when ya need'em? I just dont see it.
The clone is really square. Not like the overhead view in first pic. I was thinking squeezer from the chunky contact. But other internals don't match
Sent from my LM-Q610(FGN) using Tapatalk
The 510 pin isnt screwed in all the way... or the bottom metal strip isnt screwed in?
*shrug*
*shrug*
If you are talking about that extra "foot" stickin out (behind it) of the mod. I was kinda wondering wtf that was. I still dont know what it is, but thats my guess.
looks like the bottom had a slight reprofile? doesn't look to stick out as far
I alluded to that with the contact not looking beefy... maybe it is as stupid as the contact is smushed lol
I alluded to that with the contact not looking beefy... maybe it is as stupid as the contact is smushed lol
Yah, but that boxer looks diff.. the squonk bottle and 510 connection..
This one looks more similiar
- Status