Become a Patron!
Billet Box Appreciation Thread
- Thread starter forza
- Start date
Thanks, I like it a lot... first 21700 mech for me... what sold me on it was that the button housing doesn’t carry current due to how the switch is designed...the housing only holds the button in place.
Constant contact, Silver contacts.
I just need to find a good way to clean the internal part of the mod...probably look at some unstitched Dremel buffing wheels
Sent from my iPhone using Tapatalk
Ok Xeta peeps, I'm getting going here. All washed up and ready to go, here comes the questions. I'm looking for what I call a fairly tight mtl. 2019 kayfun wide open, kayfun lite +, ares 1/2 af, siren or skyline 3/4 sorta thing. Going to set the first one up with smaller 2 hole plug, and middle chimney reducer. Sound about right? Do I need the p.o.s. af ring on the bottom? What to do with the jf screws? Will be running 65vg ish juice in them
Sent from my SM-G920R4 using Tapatalk
Sent from my SM-G920R4 using Tapatalk
I'm not sure what "fairly tight" means to you and I don't have any of the atties you mention (sorry), but try starting with the small 2 hole under the coil and the 3mm in the chimney. That's "fairly tight" to me anyway.
I didn't have any problem with a 3mm coil in mine.
Lemme check real quick.
Yes
Ok, that's what I went with. Jucin' her up now.....
Sent from my SM-G920R4 using Tapatalk
Personally I wouldn't bother with the bottom airflow thing.
All you need is for the cotton to be snug in the ports. With a 3mm coil and commercial 50mg juice, which I suspect is probably around 60/40 pg/vg I have zero leaking and perfect wicking with the juice flow screws all the way in like it came.
All you need is for the cotton to be snug in the ports. With a 3mm coil and commercial 50mg juice, which I suspect is probably around 60/40 pg/vg I have zero leaking and perfect wicking with the juice flow screws all the way in like it came.
Of course you're not obligated to like it that way, but that seems "fairly tight" to me.
I put it on, but wide open. Yeah if no leaking without it, I don't need it. I left the screw (jf) as is all the way down. Wicked fairly tight, and thinned just a touch. Had no clue on length? But.... I'm hammering it. Good "crackle", nice bubbles, perfect, and I mean perfect draw. No cance of a dry hit, hopefully no leaking. The flavor, oh yeah. Right up there with all of my favorites. I'm going back and forth with 2019 kayfun, and it's right there. I have fallen victim to first love many O times, but if this keeps up, oooooooooh yeah. Will keep you all posted with my thoughts, and thank you all so much for the direction. @Mykreign , vapeshell might not even see the kindbright inserts if this keeps up...
Sent from my SM-G920R4 using Tapatalk
It IS very good indeed. Glad the airflow setup worked out so well. It's tough to gauge for somebody else without a solid reference point.
I took my boro out after 3 days I think it was and bone dry except for a hint of frosted condensation on the very bottom. Nothing on the walls at all.
Last edited:
Looks awesome!Look about right?
Your cotton is a hair longer than mine, but that shouldn't make any difference.
As much as i'm liking BB vaping, just been hard for me to get a true mtl vape (to me).
It IS very good indeed. Glad the sirflow setup worked out so well. It's tough to gauge for somebody else without a solid reference point.
I took my boro out after 3 days I think it was and bone dry except for a hint of frosted condensation on the very bottom. Nothing on the walls at all.
Plus most have some leaking or condensation (probably my fault). I am ecstatic right now... I can't even imagine that smallest chimney reducer with smallest af plug, but might just have to try it to see......
Sent from my SM-G920R4 using Tapatalk
Yeah, with the smallest insert and reducer that's gotta be just skin tight. I read a couple guys over at POTV who are loving that setup alot, but they did say they were getting a bit more condensation that way, but that just makes sense.
Thanks for all the help and chat, I gotta go to bed, but leaving one really happy sob for $20 so far
Sent from my SM-G920R4 using Tapatalk
Good to hear! I think the inserts you went with are the same I was planning to use. I think the two hole insert is the 1.4mm?
I wish I knew where mine were. Tracking said it arrived at a USPS regional facility and now says in transit on time.
Sent from my SM-G950U using Tapatalk
The 1.4mm yes, I think. Mine took 4eva, for whatever reason. Shipped on the 2nd, got here yesterday lol.
Sent from my SM-G920R4 using Tapatalk
What he said. I don't know this for a fact, but I'm betting that the YFTK and SXK are made in the same place.
Ya need that
cool, in cart. along with an orange sxk(what is the bb name for the orange ?), that i may change my mind on. i'm think = spend future vape money now before the tax crap sets in. i wouldn't pay $250 of one.
Ya need that
you say its good, so its good.
I just had a brainstorm. (scary I know)
I wonder if the CHIMNEY INSERTS can be put in the other way? With the doming down toward the deck.
I wonder if the CHIMNEY INSERTS can be put in the other way? With the doming down toward the deck.
A daring state of mind to be sure
Threading is threading... but I think that would cause turbulence since (I am guessing) the under side of the inserts are domed... this dome would and although in a small confines of a chimney as such... actually act as a funnel or condense... flipping them I would assume diffuse rather than funnel.
I am waiting for the pictures from @BrewBear
He is at CCKS (California Custom Knife Show) and there is going to be so much eye candy.
I do hope he is able to nab a Sebenza 31... such a sexy knife...
If you can't land a Sebenza 31 Brew, the Inkosi is everything the Sebenza 31 is... every attribute the 31 has besides the pivot is the same as the Inkosi... IE Offset pocket clip... ceramic ball detent.
Have fun and post those pics up so I can drool
He is at CCKS (California Custom Knife Show) and there is going to be so much eye candy.
I do hope he is able to nab a Sebenza 31... such a sexy knife...
If you can't land a Sebenza 31 Brew, the Inkosi is everything the Sebenza 31 is... every attribute the 31 has besides the pivot is the same as the Inkosi... IE Offset pocket clip... ceramic ball detent.
Have fun and post those pics up so I can drool
I'm a bonehead. They are supposed to go in dome side down. Which is what I would think, but for some reason I thought I remembered seeing them put in from the bottom, dome side up.
Put it in the way that gives you the better vape... doesn't need to go in as others have.
Perfect example... ESG Skyfall RDA... The inserts for this RDA everyone flipped them... to which increased flavor... wasn't intended to be flipped, but almost everyone who uses it, flipped them.
I could post a picture of the line I'm in.....I am waiting for the pictures from @BrewBear
He is at CCKS (California Custom Knife Show) and there is going to be so much eye candy.
I do hope he is able to nab a Sebenza 31... such a sexy knife...
If you can't land a Sebenza 31 Brew, the Inkosi is everything the Sebenza 31 is... every attribute the 31 has besides the pivot is the same as the Inkosi... IE Offset pocket clip... ceramic ball detent.
Have fun and post those pics up so I can drool
At least it's not raining ....
15mins!
Good luck brew...go ahead and walk right to CRKs table.
CCKS is smaller than Blade Show, no large booths etc.
But still very cool to be at. Get some one on one conversations with the makers.
Not sure if Anne is there with Tim, but if you do pick up a CRK make sure to have them sign your box!
I saw some Instagram videos already of the show
Sent from my iPhone using Tapatalk
I was just on BB today, buying then unbying the orange about 10 times lol. Forget what they call it. I really really want one, but for the first time, for some reason, rationality it overtaking me
Sent from my SM-G920R4 using Tapatalk
I was just on BB today, buying then unbying the orange about 10 times lol. Forget what they call it. I really really want one, but for the first time, for some reason, rationality it overtaking me
Sent from my SM-G920R4 using Tapatalk
Kurbis I think it’s called...
I like them, it’s sexy.
I think this would look great with some sexy carbon panels, even plain Jane it’s sexy...
I mean look at color! Eye catcher for sure...
Other colors are nice also, but the Kurbis... man this thing is like WOW!
I’d get one, heck I might just grab it and stick the Xeta in it and be like, “One of US!”
/end enabling
Sent from my iPhone using Tapatalk
Yup, that's it and I agree. Even plain panels look great on it. Like it much better than the mother of peril button one. Ah yes, I feel that rationality just oozing right outta my poresKurbis I think it’s called...
I like them, it’s sexy.
I think this would look great with some sexy carbon panels, even plain Jane it’s sexy...
I mean look at color! Eye catcher for sure...
Other colors are nice also, but the Kurbis... man this thing is like WOW!
I’d get one, heck I might just grab it and stick the Xeta in it and be like, “One of US!”
/end enabling
Sent from my iPhone using Tapatalk
Sent from my SM-G920R4 using Tapatalk
Kurbis, wtf is that, thats lame. i will rename it Dragon Poo !
I thought you already had a DNA60 SXK?
And.......... Kurbis ordered......
Sent from my SM-G920R4 using Tapatalk
