I REALLY need help with building a warm vape/22ga kanthal

[JLFROST]

I just wrapped my first dual set of 6 wrap 22ga kanthal coils the other day wrapped around one of those basic small screw driver that you get in the box with just about any RDA you buy .

I usually use my RX200 to crank the watts to get a warm vape but its broken so im using just my single battery Denali Mechanical mod with a Mason RDA " the smaller one/24mm" and with this set up its not giving me the heat or throat hit that I need.

If I take a wrap off each coil will that help heat things up or do I need more wraps and a smaller diameter coil?

Any isight would be great, im just now getting into coil building... thank you guys!

 

[MarkS]

I would suggest a build around 0.7 ohms with a series (two 18650) Mech or a 0.3 ohms with a single 18650.


Sent from my iPhone using Tapatalk

 

[JLFROST]

I would suggest a build around 0.7 ohms with a series (two 18650) Mech or a 0.3 ohms with a single 18650.


Sent from my iPhone using Tapatalk

I only have my Denali right now, is there anything I can do with this single battery mechanical?
What size wire would I need and how many wraps?

 

[HondaDavidson]

Steam-engine.org plug in wire and ohm it'll give you wraps.

Sent from my SCH-I605 using Tapatalk

 

[MarkS]

What battery are you running?


Sent from my iPhone using Tapatalk

 

[MarkS]

Use a 1/8" drill bit and go to a single coil of 8 (8/7) wraps with the 22 AWG.


Sent from my iPhone using Tapatalk

 

[JLFROST]

What battery are you running?


Sent from my iPhone using Tapatalk

Im not really suuuuuuure what kind of battery it is.
I just know that when I go to our local vape shop I say give me the best one you have for maximum performance.

 

[JLFROST]

Steam-engine.org plug in wire and ohm it'll give you wraps.

Sent from my SCH-I605 using Tapatalk

Thanks ! Ill be going to this in just a few minutes to check that out.
Like I said im new to building myself, I did for a few times when I first started back when but havent for a few years